Modern windows are not only an opportunity to keep warm, but also to give a noble look to any building, even an old one. The practicality of plastic structures justifies itself, and other types of glazing of windows and balconies are rare.
Plastic windows with a window leaf take the first positions in popularity. This is not only practical, but also familiar to the majority of the population. Most often, this type of window construction is bought and ordered for the kitchen. This is the most convenient and fastest way to ventilate the room from unpleasant odors. The bedroom also needs a regular supply of fresh air. Then the sleep will be strong, and it will be easier to wake up in the morning.
Where are pane windows used?
Windows with a window leaf are best used in the kitchen. This is due to the need for frequent ventilation of the room. And fresh air in the bedroom during sleep is not only he alth, but also a good rest. Kitchenalways filled with a lot of different smells, so a plastic window with a window in the kitchen will be a great way to get rid of unwanted odors.
Windows with vents are also suitable for the living room. After all, there are often flowers on the windowsills here, and pets love to relax. A window with a window leaf, unlike a transom, will not cause inconvenience to either flowers or animals.
Sizes
The dimensions of plastic windows with a window leaf are limited only by the dimensions of the main sash. As a rule, the standard sizes for most manufacturers are 50 X 50 cm. If you need a smaller size, then such a window can be made to order. It all depends on your preferences. Many companies make windows with 40 x 40 vents, which is convenient for small apartments. Can be used in children's room.
Unfortunately, vents that have a tilt-and-turn principle of operation must have a height of at least 60 cm. Due to this, the size of the second sash can be reduced. The main differences between vents and transoms are as follows:
- the transom opens from above, the window has a handle only on the side panel, it opens only in one of the sides - either from left to right or from right to left;
- convenience of use at any time of the year.
In the photo above, plastic windows with a window open in such a way that the air flow goes to the upper part of the room.
Advantages of windows with a window leaf
- The decision to install plastica window with a window indicates that a person is accustomed to this type of window and does not want to change his habits. This applies more to retirees. They honor traditions and are not ready to change their habits.
- Window with a window leaf is absolute safety for children and pets. The risk of accidental falling is excluded. The window is high, and you can open it not completely, but only halfway.
- Convenient to use even if the window sill serves as a place to store various things. If you open the window completely or fold back only the top of the sash, then things on the window will interfere.
- Practical. The window allows you to ventilate the room gradually, without a large air flow. This is good in the presence of large window structures. It is also helpful to sleep with a flow of fresh air. By opening the window just a couple of centimeters, you will ensure a sound and he althy sleep.
- The service life of the main openings in the window is increased. In order for the windows not to fail, they must be regularly tightened and the pressure density controlled, which is broken every time the sash is opened. The window leaf has small dimensions, and the opening mechanism almost does not wear out.
- Suitable for old-style houses in which it is undesirable to change the principle of the window mechanism.
These advantages make windows with a window in demand. The convenience and practicality of such designs speak for themselves.
Flaws
There are many advantages to plastic windows with a window, but there were also disadvantages. Main onat the moment, the negative indicator is the cost of such a structure. Of course, the price will not increase significantly, but for some it will be quite noticeable. The cost increases due to the fact that the structure requires more material.
Another important fact is that additional plastic profiles reduce the glass area, thereby reducing light transmission. And if you are accustomed to a lot of natural light, then it will be difficult for you to accept the fact that the light transmission will decrease by almost a third.
Ways to open the window
The most common ways to open vents in a plastic window are:
- Rotary. The opening is made in one of two directions. For example, from left to right. This type of opening can be attributed to the standard. Grandmother's apartments were ventilated in this way long before the appearance of plastic windows.
- Tilt and turn. In this case, the ability to open only the top of the window is added to the standard first option. Convenient and practical. You can be sure that the air will go along the ceiling, gradually refreshing the room. This type of opening is suitable for the bedroom. The window can be left in this position even overnight.
- Fanlight. There is a similarity with the folding opening. The only difference is that hinges are installed along the bottom edge, and the structure can open completely. The disadvantage of this type is that the area of \u200b\u200bthe room is also ventilated with a strong flow of fresh air.
Each of these opening methods has its advantages. Which one to choose is up to you.
Installation Methods
Plastic windows can be equipped with a vent both initially and after installation, that is, in fact. Buying a finished design is easier. But to make a window in a plastic window after installation is not an easy task.
The most important thing! Do not try to make a window with a window leaf on your own. For this, it is best to use the services of professionals.
In conclusion, we can say, no matter what size of the vents in the plastic window you choose, this is always the most advantageous option. And if now you do not use the window, then perhaps in the future the decision will change. Be practical and look to the future. It is much easier and cheaper to buy a ready-made window with a window than to cut an opening into an already installed double-glazed window.
