Before ordering stretch ceilings, you should ask what mounting systems are used. It must be remembered that structures can be made of PVC film. There are fabric options. Each type requires a different installation method. Harpoon is one of the most popular methods when working with a ceiling structure. It is necessary to find out the features of the harpoon system for fastening stretch ceilings, its differences from the glazing bead system. All this - later in our article.
Description
The harpoon system for fastening stretch ceilings has its own characteristics. This method can only be used when working with vinyl stretch ceilings.
Harpoonis a hook made of PVC. It is attached to the film by welding around its entire perimeter. With the help of a harpoon, the film is connected in the profile. The harpoon system for fastening stretch ceilings requires a special aluminum profile. It should be wide.
The harpoon is usually in the form of a plate with hooks. Much depends on the manufacturer. Each releases parts that are different from others. When the installation process of the ceiling film is completed, a gap remains between it and the wall. The technological gap can be up to seven millimeters wide. After completion of installation work, it should be closed with a special plug.
Features of the gapless fastening method
Recently, the harpoon system for fastening stretch ceilings has a new variety. The new method is called gapless. This method has its own characteristics.
The advantages include the fact that the coating is close to the wall. No need to buy masking tape. The method can be used in rooms where all the walls are perfectly even. If there are irregularities on the surfaces, then there is a risk of damaging the film. The gapless method is used when they want to install multi-level ceilings. In this case, no additional inserts are required.
How is the glazing bead?
Many can't decide which is the best stretch ceiling mounting system - harpoon or glazing bead system.
The second method is inexpensive. the system alsocalled wedge. During the work, specialists use a wooden glazing bead. Some take it from plastic. It replaces the wedge that clamps the blade in the profile. The glazing bead also serves as a retainer for the original canvas.
This method was invented by our compatriots, and it is used exclusively in working with the ceilings of our houses. The system assumes the presence of an aluminum profile in the shape of the letter "P". In order for the film to be tightly fixed, the glazing bead must completely go into the groove of the profile.
The desired system assumes the presence of a technological gap at the end of work. It should not be more than twelve millimeters. It should be covered with a plinth. Masking tape may be used.
Which ceilings are installed using the glazing bead method?
This method is most often used for Russian-made vinyl ceilings. The method is also suitable for mounting a Descor fabric structure. If the coating has increased strength, then this method will not work.
How is the glazing system for fastening stretch ceilings inferior to the wedge?
This system is inferior to the harpoon in that the wedge can loosen and the edge of the blade will pop out.
If a stretch ceiling is installed by a novice in this business, then he can overtighten or not pull the canvas hard enough. If a person loosely pulled the material, then you can not try to install it again. Bead fastening system reduces the service life of stretch ceilings. They will be short-lived.
Many people use this method because it is cheap. They should consider that repairing the system and reinstalling the ceiling will cost many times more than using the harpoon method.
Advantages of the harpoon method
The harpoon system for attaching stretch ceilings (photos of examples of work are in our article) has a number of advantages:
- Installation is quick and easy.
- Suitable for pipe bypass. The harpoon system for fastening stretch ceilings is used in any hard-to-reach places.
- PVC film lays down evenly, without wrinkles.
- If flooding occurs, the structure can withstand water pressure, it will not collapse.
- You can remove the structure if necessary. You can install it again.
- In one level, due to the harpoon fastening system, it is permissible to connect different types of canvases.
- PVC film cannot sag with this fastening.
- If the room has low ceilings, then the harpoon method is ideal for installing stretch ceilings.
- Precise calculation of materials with this method saves money.
- Fasteners will last more than one year.
Disadvantages of the harpoon method
The main disadvantage of this system is the need for accurate measurements in the room. You need to know all the features of the room. The harpoon system for fastening stretch ceilings requires taking into account the geometry of the room. Therefore, before work, accuratesettlements.
Mounting Features
Harpoon system for fastening stretch ceilings has a special fastening technology. Before starting work, you need to prepare the walls. All cracks should be sealed. The concrete must not crumble. Walls must withstand heavy loads.
You should take measurements with a tape measure and a building level. The quality of work largely depends on the accuracy of measurements. Markings are required on the walls. This will require cord and paint.
The plastic profile should be fixed with self-tapping screws. You can use a dowel. The harpoon is attached to the canvas with a spatula. It is installed in the inner groove on the profile. Work starts from the corner of the room. In a similar way, the canvas is attached in the remaining corners. After that, straight sections should be fixed.
A heat gun is required for the final leveling of the ceilings. The plinth should close the harpoon and the plinth. If required, holes can be drilled in the system.
It will take several hours to complete the work. If you do not deviate from the specified requirements, then the design will differ in durability and reliability. If you study all the installation instructions, then you can do the installation work yourself. However, in the absence of experience, you can seek help from specialists. In this case, the work will be completed as soon as possible. The cost of installing stretch ceilingsis about 250 rubles per square meter.
Conclusion
So, we have considered what a harpoon attachment system is. As you can see, this installation method is very practical and reliable.
