It is known that the design of a plastic window, despite its strength, can be damaged during installation. That is why it is so important to choose a good company whose employees are familiar with the technology of installing plastic windows, otherwise one cannot hope for a positive result. If during operation the technology was violated or not observed, the assembly seam becomes unusable, on average, after three years.
The correct approach to installing windows is the use of special tools that provide vapor barrier, waterproofing and noise insulation. Unfortunately, they are often replaced with one mounting foam. In this case, only the installer remains in the black, because by reducing the cost of purchasing materials, he keeps part of the money for himself. High-quality technology for the installation of plastic windows, subject to the observance and control of each stage,allows you to get a lasting result. Otherwise, the consequences can be dire. Currently, you can see a lot of windows, the seams of which, under the influence of moisture and the sun, become too thin or completely deformed.
Also, a significant role in the installation of windows is played by the correct processing of internal and external slopes. Indoor humidity can be increased, which leads to a decrease in the insulating properties of the foam up to 20 times. If the foam left outside the window freezes, its insulating qualities are already reduced by 80 times. To prevent such a nuisance, professionals use sealing foam. Pre-compressed, it gradually expands and allows for permanent insulation. The observed technology for installing plastic windows allows you to resolve all emerging issues in advance and prepare for such surprises as severe frosts or too high temperatures outside. indoors. It is glued to the frame around the entire perimeter with an adhesive strip, after which it is additionally filled with mounting foam. The free edge is installed on the slope, securely fixing the structure. The window must be installed so that condensation does not accumulate on it; for this, the frame is specially installed a little deeper in the wall or the slopes are pre-insulated. In addition, the technology for installing plastic windows cannot go against the rules for dismantling old ones.windows.
In order not to damage the space, first of all, the sashes are removed along with the glass, then the frame is cut into several parts and pulled out so as not to damage the slopes. After cleaning all the cracks and removing the putty, you can proceed with the installation of a new option. It is worth noting that the technology for installing plastic windows in a wooden house may differ somewhat from working in a brick building. In order for the drying tree not to experience great pressure, the window frames are protected by a special casing - a metal reinforcing bar. Properly executed window installation technology will allow you to get a high-quality structure, the durability of which will not be in doubt. According to the rules, windows can be installed using mounting plates hooked to the outside of the frame and fastened with dowels to the wall. So it is possible to work with a nylon dowel and a self-tapping screw passing through the frame with a self-tapping screw or a metal frame dowel.
