Adhesive tape is a tape on which a layer of glue is applied. Sometimes it can be one-sided or two-sided, fast-adhesive or weakly fixative. This is just an incredibly useful thing in everyday life and construction, but after working with it, you can sometimes encounter some problems. The most common are traces of glue on the material or remnants of adhesive tape. Very often this can be observed on plastic windows, and sometimes it takes a lot of effort to remove the tape from the surface.
At the moment, you can find plastic literally in any room, as it is a practical and high-quality material, but there is a lot of trouble in cleaning with it. And to maintain the original appearance, you have to make an effort. It is extremely important to approach the issue responsibly, otherwisecan cause irreparable damage to the window. But, knowing some secrets, you can easily cope with this task and not wonder how to clean plastic windows from adhesive tape.
Method 1
Of course, it is best to remove the tape immediately, because after that it will be incredibly difficult to remove the film without damaging the material. Therefore, it is much better to do everything immediately and quickly. This method can be used if traces of glue are still fresh. On top of the place where the adhesive tape remained, stick a new tape, press it well, and then tear it off sharply. When the first time you can not cope with pollution, you can repeat the action. Or use an eraser and, following the principle of removing a pencil from paper, do the same with traces of glue.
Method 2
For this method you will need something based on alcohol, vodka, cologne or pure alcohol will do. Soak a sponge or soft cloth in the substance, then wipe the contaminated area. But there is one important caveat: it can cause damage to some types of plastic, it all depends on the quality, so it's worth trying in an inconspicuous place first.
Method 3
Cleaning products do a great job with tape marks. Those that are in the form of a finely crystalline powder or paste are suitable. A substance is applied to a wet washcloth, and the tape is removed in a circular motion. Just be careful when rubbing, as you can leave scratches on the surface.
Gels or cleansers are also suitableutensils, they are quite easy to use and absolutely safe. Simply apply to a damp cloth.
You can also use the same product as for glass cleaning. Spray the stain and leave for ten minutes, after which you can wipe. Finally, wash the window with clean water.
Method number 4
Detergent can actually be prepared on your own, for this you simply need to mix baking soda with water to make a slurry, this mixture is applied to the contaminated surface and left for a couple of minutes, after which it is washed off with clean water. If there are still traces, then the procedure can be repeated. Thus, the question of how to clean plastic windows from adhesive tape is solved quickly and with the help of those tools that are always at hand for any housewife.
Method 5
How to clean plastic windows from adhesive tape? If the material is not afraid of high temperatures, you can heat the plastic with a hair dryer or steamer. It is enough to heat only from the edge so that you can grab and carefully remove the adhesive tape, after the traces, warm up a little more and wipe with soapy water.
A more gentle way of heat treatment is hot compresses, for this you just need to heat the water and wet the towel, wring it out well so that water does not drip from it. And walk them on adhesive tape, if necessary, the procedure can be repeated several times. Under the influence of temperature, the adhesive tape should peel off, and it can be removed from the surface, if necessary, you can use additionalmeans, such as a spatula.
Method number 6
How can I clean plastic windows from adhesive tape? There are also less budgetary, but more effective and comfortable means to use. The modern market offers many products that are aimed at solving such problems. They are mainly made in the form of aerosols and are very convenient to use, for example, they do not flow down a vertical surface. After some time, the adhesive on the adhesive tape dissolves, and it easily peels off the surface. With the same tool, you can completely wash the window, removing glue residue from the surface. Plus, by purchasing it, adhesive tape and any other stickers can be removed not only from plastic, but also from any other surfaces. And on top of that, the manufacturers promise that the composition will not harm the material itself, although they are prudently asked to check the reaction in an inconspicuous area before use.
Method number 7
How to wash plastic windows from adhesive tape? You can use vegetable oil, which one does not matter, both sunflower, and olive or corn are suitable. Or various aroma oils. In this case, in addition to a good result, a pleasant smell in the room will also be noticeable. Using a sponge or a soft cloth, the substance is applied to the plastic, then it should remain on it for 10 minutes, after which you can wipe it off with a napkin or, after making a soapy solution, wash the frame. And finally wipe with a damp cloth. This is a very gentle way, which will certainly not leave any damage, as well asbad smell.
Method number 8
One of the interesting ways is to remove the adhesive tape with toothpaste. To do this, you need to thoroughly wipe the surface, remove the adhesive tape. Spread the contaminated surface with toothpaste, hold for a while, then wipe dry with a rag. Then wipe the entire mixture with soapy water. The bonus when using this method is that with it you can get rid of not only adhesive tape and its traces, but also scratches. Therefore, there is an answer to two questions: how to clean plastic windows from adhesive tape and how to get rid of scratches on plastic
Method number 9
Refined gasoline or white spirit can help, but these substances should be handled with extreme care, to check the surface should be applied to the surface. Then leave for about five minutes, if nothing changes, then you can process the surface. To do this, moisten a soft cloth or cotton wool in the substance and wipe the surface. Then go over the top with a dry cloth.
Method number 10
Sometimes you may encounter the fact that some windows have been sealed with tape for a long time, and nothing helps to get rid of it in such a difficult case. You have to tear it off in small pieces, and in the end it takes too long, and the surface remains very unpleasant and sticky to the touch. How to wash plastic windows from adhesive tape? There is a way that works great in such cases. Forto get rid of the adhesive tape, you will need a double-sided dish sponge, spatula, gloves, laundry soap.
We take a sponge that needs to be soaked in water, then wring it out well so that water does not drain from it, then lather laundry soap on the hard part. Soap the surface well, then wait a bit and, gently prying with a spatula, remove the adhesive tape, the spatula should be sharp to make it easier to peel off. Then the question arises of how to wash off traces of adhesive tape on plastic windows. Simply, with the same hard side of the sponge, making an effort, go through the remnants of the glue, carefully scrubbing everything. Then soak the washcloth in clean water and wash off the remaining glue. In order to tear off the remnants of adhesive tape, you have to try. But in this way, you can gradually clear the entire window. Although it should be noted that this is a very laborious occupation.
Removing double-sided tape
And if the solution to the problem of how to wash the adhesive tape from a plastic window sometimes does not take much time, then with a double-sided one everything is much more difficult. Since it holds stronger than the usual stationery, so first you need to warm it up with a hair dryer or steamer, then carefully remove it from the surface. The remaining glue can be handled with an ordinary soap solution, or any detergent will do. If they cannot remove the traces, then you can try using acetone. Apply it on a cloth and wipe it well, then rinse with clean water. Also, if all of the above methods do not work, then you can try to remove the adhesive tape with refined gasoline, it will work wellone that is designed to refuel lighters. But what should not be forgotten is the need to check this or that product on the spot where damage will not be visible.
Substances that are prohibited to use
- Powders with a coarse crystalline structure, as they can damage the material and leave scratches on it.
- Acids - using such products is very dangerous. They can spoil the appearance, even later the plastic sometimes changes color from pure white to yellow.
Therefore, when thinking about how to clean plastic windows from adhesive tape, it would be better to abandon the above funds.
