A large number of a wide variety of new products have already been invented, which are widely used in construction. And floor coverings, and facing materials, and decorative elements - all this delights and pleases the eye. This article will talk about what you can see by raising your head. The rack ceiling, the installation of which is not so laborious, began to gain more and more popularity among lovers of something original. Mostly masters install them during the renovation of bathrooms and kitchens.
If we take into account the rack ceiling "Albes" made of aluminum, we will see a number of advantages.
- This type of ceiling is neutral to temperature changes and humidity. Naturally, most often when choosing a place where to install, a slatted ceiling is installed in bathrooms.
- Taking into account the factor that this type of ceiling still belongs to the category of suspended ceilings, it can be used to hide all the irregularities of the main surface.
- Fairly easy installation. The slatted ceiling can even be installedyourself.
- The material used for this ceiling is environmentally friendly.
- Effective design.
As mentioned earlier about the installation, the rack ceiling is quite easy to install yourself. The main thing is to follow the instructions and understand all the nuances. First of all, it is worth noting that the ceiling is mounted at the very end of the work. In other words, first you need to plaster the walls, complete the flooring, install windows and doors. If there are cables and wires, then they need to be fixed so that they are
we did not interfere.
In order to successfully install rack ceilings, you will need the following tools: tape measure, screwdriver, drill, level, metal shears. Do not forget about the materials that will be needed in order to make a better installation. Slatted ceilings are created using hangers, panels, dowels, screws, profiles and traverses.
So, the main nuances are considered. Let's move on to the installation instructions.
- First you need to make all the required measurements of the ceiling and install the profiles. The hinged structure must be lowered about ten centimeters from the main surface. In the event that the guide profiles are a little long in size, they can be cut with scissors.
- Profiles should be fastened along pre-drawn lines. In this case, screws and dowels are used as fasteners. It is worth knowing that you need to mount them with an approximate step infifty millimeters.
- After the corner of the room is reached, the profiles must be fixed and checked for evenness with a level.
- Then you will need to take measurements in order to fix the hangers. The distance should be approximately one meter.
- Use a drill to make holes and fix the hangers using screws and dowels. After that, you need to check how smoothly the installation was done.
- The traverses should be fixed. The installation distance must not exceed one meter.
- After the traverses are successfully fixed, you need to check them with a level. The whole structure must be perfectly flat. And only after all the checks it will be possible to proceed to the installation of panels.
- Having freed the rack panels from the protective film, they should be installed. All elements will snap onto the traverses.
That's it! Completely installed. The slatted ceiling can now delight and delight guests and apartment owners.
