Pipes located in the most visible place in the bathroom can completely spoil the entire interior. Their appearance violates the designer's intention and turns the room into a real farce. In this regard, many owners of new apartments and houses are thinking about how to hide pipes in the bathroom and at the same time get rid of the noise that they often create. You can hide pipes in the room in various ways. The main thing is to do this when the repair in the apartment has just begun.
Bathroom. Hiding pipes in the wall is the best design solution
Most often, all communications in the room are hidden in the wall, which is one of the best disguise options that is best for those who are going to make repairs or are just starting it from scratch in a completely new apartment or house. To mask the pipes in the wall, you will need a markeda plan for the passage of communications, the tools necessary for the work, the communications themselves, best of all polypropylene, cladding and fastening tools.
How to hide pipes in the bathroom: mask them in the wall
To lay communications in the wall, first of all, it is necessary to make a groove, which must fully correspond to the dimensions of the pipes. It should be noted that this groove should be slightly wider if it is intended for pipes with hot water and heating, since these communications have a certain property, such as expansion occurring under the influence of high temperature. After the groove is ready, the pipes in the wall must be fixed using pre-prepared special fasteners.
All other recesses should be laid, and the wall itself should be leveled and prepared for further tiling. One disadvantage of this method of masking pipes is the need to dismantle the walls in case they leak. But, it should be noted that if the pipes are laid correctly, this should not happen.
Re-planning communications and bathroom: your imagination will help you hide the pipes
This disguise method is more suitable for those who have just started repairing. It consists in reorganizing the sewerage and water supply system and introducing all existing communications into one niche, which is mainly done in the wall, for example, under the washbasin. In this niche, you can not only lay pipes compactly, but also attach valves, with which you caneasily control the entire water supply system and block it in case of a breakthrough or replacement of plumbing.
How to hide bathroom pipes with furniture?
Perhaps one of the easiest and not too expensive ways to mask communications is to hide them with simple furniture. This disguise method is optimal for those who do not plan to start repairs in the bathroom.
All that is needed for this is to pick up moisture-resistant furniture, and then work on it a little. To do this, you must first calculate the dimensions of communications, their height at which they are located, and other important factors, after which it is necessary to cut out the rear walls of the cabinets according to a previously drawn up plan and attach the cabinets to the wall. Thus, you will get a neat and absolutely clean bathroom. In addition, various boxes, superstructures, podiums and suspended ceilings will be an excellent way to hide pipes.
Therefore, if you are thinking about how to hide the pipes in the bathroom, but do not know what to do, you can use the methods of masking communications that we have described in this article.
