Even the most unique bathroom design, by the most fashionable and expensive designer, can look terrible if the riser is not hidden in the bathroom. For lovers of aesthetic interiors, there are several ways to hide communications. In today's article, we will look at how to do this.
Basic rules
Sewer risers, as well as other types of communications that are laid openly, are not recommended to be walled up tightly into the wall. It is better not to use capital partitions for this, but to get by with lighter materials, which in the event of an accident or repair can be easily, and most importantly, quickly dismantled.
Also, experts do not recommend installing solid structures. It is much more convenient to provide a service door through which you can check the meter readings or the state of communications. The presence of the door will allow, if necessary, not to disassemble the partition.
In order not only to remove the riser in the bathroom, but also to reduce the noise level from the operation of the water supply and sewerage, expertsIt is recommended to lay a layer of soundproofing materials between the structure. It can be mineral wool or something else.
When selecting the necessary materials, it is worth remembering that the bathroom is a room with a high level of humidity. Products made of materials that do not tolerate moisture should be treated in advance with special solutions. If you do not take this into account, then after a while the design will lose its attractive appearance. Fungus and mold will begin to form on it.
Before you completely hide the pipes, you should make sure that all elements are made of the same material. This will reduce the risk of accidents and increase the service life.
After the bathroom riser box is fully assembled and installed, it should be covered with insulating materials. This will protect it from constant exposure to moisture.
Main design options and their features
How to hide communications? There are four main ways. The first option involves the manufacture of a metal or wooden frame, which will then be sheathed with a variety of materials. It can be drywall, plastic panels, chipboard.
The second way is to use hanging blinds or any other screens that can be mounted on the ceiling.
The third option is a combination that combines a frame structure, as well as a hinged one. Most often, various lifting systems are used as a hinged structure.
The fourth option is non-separable boxes, which have a window and a service door. The latter serves to simplify the process of checking water meters.
Frame structures
Let's look at popular designs to hide the riser in the bathroom. These solutions are built on the basis of a frame made of metal or wood. There are several types of such structures.
Continuous bulkhead
How to fix a riser in the bathroom? Continuous bulkheading is one of the available options for solving such a problem. In this case, the false wall is assembled in the form of a box, which is mounted on the far or side wall of the room. The frame is sheathed only on the outside. The advantage of this option is that only one material is used for sheathing. It can be plastic, ceramic, fiberboard, drywall and other suitable components.
Among the disadvantages of this method are the difficulties in the process of repair or prevention on communications, as well as a significant reduction in the area of \u200b\u200bthe room. Often these designs are used in toilets, but they are also found in bathrooms.
Angular bulkhead
In terms of its structure, this partition does not differ significantly from its continuous counterpart.
It is used to hide the riser and other communications that are located in the corner of the room. If the pipes are laid at a distance from the corner, then you will have to block off a large area. This is a big minus.
Rectangular box
Thisuniversal design that can be used with vertical as well as horizontal pipes. The base is located as close as possible to the pipes only where they are laid. The ledges that form can be used as small shelves for storing various useful household items.
In the process of creation, certain difficulties may arise with hiding the riser in the bathroom - it is very difficult to hide the heated towel rail in this way. There are also certain problems in the process of repairing heating systems, with partial or complete replacement of communications.
Tiered box
This is nothing but a combination of false walls and boxes. Often, the latter are installed as close as possible to the pipes, but at the same time they are removed from the wall. The box repeats all the protrusions of the pipeline. This makes it possible not only to remove the pipes from the eyes, but also to save the space of the room as much as possible.
This solution is best used for large bathrooms and washrooms. In small rooms, all efficiency will be lost.
Features of hinged structures
Let's see how to close the riser in the bath with blinds and shutters. The use of hinged structures makes the process much easier - it is much easier to fix the blinds than to make a special frame.
The method with blinds is considered more aesthetic. Among the advantages - no barriers to access to communications. Blinds can be installed in the bathroom if the pipes are located on the back wall. If the communications arewall on the side or in the corner, then the blinds will not be of much use.
Experts recommend choosing aluminum blinds for rooms with high humidity. They are more durable than traditional plastics. This hinged design will make it possible to get a bathroom in one shade, without sharp color transitions. If the color of the blinds is not suitable, then the metal product can always be painted in the desired shade.
In addition to blinds, shutters can also be distinguished. These solutions are perfect for toilets. First, markup is made, and then a structure is made on it. Finding standard shutters for bathrooms and bathrooms is almost impossible. As for use, they are used in the same way as blinds. But they can only close the back wall. They are also installed on the side in the form of a combination with a drywall box.
Noise isolation
The riser in the bathroom is a rather noisy thing, and therefore soundproofing of communications is mandatory for residents of high-rise buildings. The noise that will be heard from the installed structures is unlikely to please the owners. This is true more for drain pipes.
You can solve the problem of excess noise with glass wool. The material wrapped around the pipes will help reduce noise effects significantly.
Features of the assembly of the construction of boxes and false walls
Let's see how to make a box based on a metal frame. For assembly, you will need a pipe, which is connected using a welding machine according to a pre-drawn sketch. The resulting frame is fixed on the ceiling, on the floor and walls. The wall of the pipe should be of small thickness - 1.5 mm. Such a profile will allow you to conveniently fix the skin with ordinary self-tapping screws.
Line such a frame with drywall, chipboard, MDF or any other material. Due to the use of a profile pipe and the need for assembly using welding, the structure is quite expensive.
Specialists know how to fix the riser in the bathroom more economically - you can make a frame from wooden slats. The basis of the structure is assembled from rails according to the sketch. The attachment points are the same - ceiling, walls, floor. Reiki is pre-treated with special compounds to protect against moisture.
You can also use CD and UD as a base. This design is suitable if the box is sheathed with drywall. The assembly is made from a grid of 600x600 millimeters. Fastening is carried out using self-tapping screws. We sew up the riser in the bathroom with drywall or plastic. Mounting method - horizontal, every 500 millimeters. Plastic must be fastened to self-tapping screws equipped with a press washer.
Sheathing materials
Among the materials intended for sheathing boxes, polyvinyl chloride can be distinguished. It is very aesthetic, does not differ in large mass. The material perfectly withstands moisture, which is very important in bathroom conditions. From polyvinyl chloride, you can easily get the parts and elements necessary in shape and size. And seamless plastic panels create the effect of structural integrity. There is a wide range of colors and shades available. You can easily choose panels for any interior.
Often, laminated chipboard is used as a material for sheathing. This is the main material from which furniture is made. This finish is used to match the style of the bathroom with the front door. Laminated particle board is moisture resistant and the only downside is the price.
How to hide the riser in the bathroom as cheaply as possible? If a budget option is needed, then experts recommend using lining as a lining in this case. It can be used both in the bathroom and in the toilet. But the material must first be treated with a special impregnation. Clapboard should not be used with plastic panels or ceramics.
In addition to these facing materials, cement-bonded particle boards can also be recommended. These are heavy, but at the same time durable materials. Such a plate is not afraid of moisture, does not deform under the influence of temperatures - it can close the hot water riser in the bathroom. The plate is cut with special grinders. The disadvantage is great difficulties in the process of arranging a service hatch.
Decorative trim
When the process of sheathing the frame is completed, they begin work on decorative finishing. It is best to equip the frame during the renovation process in the bathroom. As for the finish, experts recommend tiles. It is relevant for bathrooms. This is a versatile finishing material. The inspection window is also exposedfinishing.
Along with tiles, textured plaster is also used. It makes it possible to hide small defects and errors that were formed during the installation of the skin. But plaster will require serious maintenance, unlike ceramics.
Conclusion
The material was told how to hide the riser in the bathroom. As you can see, there are many ways. Each has its own characteristics. It remains only to choose the most suitable one.
