The birth of a newborn is not only a great joy, but also a responsibility. Often, a whole set of things is purchased specially for this event: a baby carriage, a bath for bathing and, of course, a crib. The most important indicator when choosing the latter is an increased level of security. But how to avoid the baby falling to the floor during the rest? To do this, it is advisable to use a special child restraint for the bed.
What is a limiter?
What does a baby bed restraint look like? Photos of such devices can be viewed in this material. Such designs take the form of removable panels that are installed on the sides of the crib. Thanks to the presence of bumpers, the child feels completely safe during the rest.
If desired, the crib can be equipped with several restraints placed on both sides of the bed. Thanks to this, parents get rid of the need to buy a play arena.
Most often for beds of newborns and still toddlers limitersmade from soft materials. This property greatly prevents injuries to the child.
Height
The child restraint for the bed is selected depending on the age of the child, the design of the bed, and the operating conditions. For the smallest, it is recommended to purchase high sides. In this case, parents do not have to worry once again about the fact that the baby accidentally rolls over the barrier.
For the equipment of a crib in which an older child is resting, it is quite enough to set the minimum height limiter. The latter should only support the baby, without causing him unnecessary discomfort. In this case, parents can only choose the limiter for the baby bed, the design of which will appeal to the child.
Built-in limiter
As a rule, the built-in edge limiter for a baby bed is purchased along with the rest of the furniture that will be installed in the baby's room. The focus here is on matching the design of the fixture to the interior solutions used.
Built-in bumpers most often come with cribs designed for children who are not able to accidentally fall to the floor while relaxing due to their age. Usually, such solutions are used for babies who have already learned to walk. Built-in structures are made low so that, if desired, the child can freelyget over the barrier.
It is not uncommon to find a built-in child restraint for a bed that contains slots. The latter are used as a support and allow babies to climb back into the crib without assistance.
For schoolchildren, such funds create additional convenience rather than protect them from injuries. Therefore, restraints designed for this age category quite often cover only a small part of the length of the bed.
Removable limiter
Removable child restraint for the bed is considered the ideal solution for arranging a bed. Such models have adjustable racks that allow you to change the height of the barrier. Moreover, depending on the model, both sides of the board can be configured simultaneously, or separately.
An excellent example of an adjustable design is the child restraint for the Tomy bed. Such a device contains a horizontal crossbar, which is connected to the side and is placed under the sleeping mattress. The design has retractable poles, which make it possible to place the barrier at a certain distance from the edge of the bed.
Drawer Stoppers
Complementing the crib with drawers is an extremely practical solution. The latter provide significant savings in free space when you need to store a huge amount of children's things.
Usually, these restraints are installed on the edge of the crib and containbuilt-in crossbars, which actually prevent the baby from falling during rest. At the same time, the functional drawers that serve as the basis of the structure are the best suited for storing children's clothes and bed linen.
DIY baby bed limiter
If you urgently need to find an option to protect your baby from falling out of bed, and there is no way to buy a factory limiter, you can resort to the following solutions:
- push the side of the bed close to the closet, bedside table or move several beds;
- use mats as a safety net or surround the crib with pillows around the entire perimeter;
- put a mattress on the edge of the bed, fixing its side with a high chair;
- protect the baby with makeshift cushions made of soft material.
In order not to worry once again about the safety of the child during the holidays, you can make a wooden limiter with your own hands, using any simple factory-made fixture as a sample. In the end, it is better to initially pay attention to functional cribs with built-in partitions so that this problem simply does not arise.
Advantages and disadvantages of baby bed restraints
Let's look at the pros and cons of this solution. Among the obvious advantageslimiters worth noting the following:
- The presence of a side does not make the baby worry about a possible fall to the floor during sleep. Installing a barrier gives the child a sense of complete security. Therefore, when he is in the crib, he behaves extremely calmly.
- Parents do not have to worry about the blanket or mattress slipping off the bed, and the child will have to freeze.
- The sides that run around the entire perimeter of the bed protect babies from drafts.
- Slotted restraints can be used to hang all kinds of toys that reduce the level of anxiety of the child during rest.
As for the negative points, they primarily relate to restraints made of soft materials. So, fabric products are able to collect dust and pollution that the baby will have to inhale while in the crib. Soft materials get dirty rather quickly, need careful care and frequent washing.
If there is a solid side, the supply of fresh air and visibility are blocked. The last drawback does not allow the baby to learn about the environment. If the limiter is presented in the form of vertical or horizontal rods, there is a possibility that the child will simply get stuck between them and get injured.
