Almost every modern home has a gas stove that is used for cooking. But it must be applied correctly, because if the safety rules are not followed, a threat to people's lives may arise. Sometimes the equipment needs to be moved to a different location. Is it possible to move the gas pipes in the kitchen? This can be done, only the work must be entrusted to specialists.
When pipes need to be replaced
The transfer of a gas pipe in the kitchen is considered a responsible procedure on which safety depends. Therefore, it should be borne in mind that skills and training are necessary to perform the job. Although hiring specialists will cost a considerable amount, it is still better to spend money on security. Otherwise, the consequences may be different.
Usually, the transfer of the gas pipe in the kitchen is carried out during a major overhaul. But this work may also be required in the presence of technical deficiencies in the equipment. According to the rules, the gas supply system must be reconstructed after 20 years of operation. What would be the procedurewith gas, you must follow the safety rules.
Transfer instruction
If you need to move equipment, you need to know how the gas pipe is moved in the kitchen. The master determines the norms for how to transfer the system. But in any case, the wishes of the owner are taken into account. Often the procedure is required due to the inconvenient location of the gas system. The transfer of the gas pipe in the kitchen is carried out by a specialist using the following rules:
- the apartment has a special gas supply valve that closes before work is done;
- gas pipeline being purged to remove residual gas from it;
- in the section of the connection with the gas pipeline, it is necessary to cut the interfering pipe, and the created hole is welded;
- a hole is made in the wall and a gas pipe is fixed.
It should be noted that the gas distribution must have an opening for a flexible bellows hose, which is used to connect gas equipment. Its length can be no more than 2 meters.
Actions if transfer is necessary
In apartments, gas pipes are usually located in the kitchen. All people use the gas pipeline and devices connected to it every day. But when the pipe gets in the way, they carry it out.
Before the transfer of the gas pipe in the kitchen is carried out, it is necessary:
- make an application to the gas service, where you need to indicate the reasons for the transfer of the pipe;
- the area where the pipe will be installed must be inspectedspecialist;
- work conditions are being assessed;
- a specialist makes a decision on the possibility of transferring pipes.
In some cases, if the owner does not like the divorce of the system, a new technical plan of the room is drawn up. This takes into account the location of the equipment.
Requirements for specialists
Before performing work, you need to make sure that the specialists have the appropriate qualifications. That's why it's so important to look at credentials, assessment times, and skill validation.
When the transfer of the gas pipe in the kitchen is completed, the owner of the premises is issued an act on the work done. Gas system changes are being made to it.
Generally accepted rules
In whatever place the gas pipeline is installed, on the wall, floor, anyway, the distance from it to the structures of a building nature should ensure the possibility of inspection, control and installation. The system in the kitchen cannot cross ventilation grilles, window openings.
The distance between the pipe and wire broadcasting facilities is set based on safety rules. In residential premises, the height of the installation of equipment and its wiring will be at least 2.2 meters from the floor to the bottom of the pipe. If she has insulation, then the distance to the bottom of the insulation is taken into account.
Fixation of the gas pipeline is carried out using:
- brackets;
- hooks;
- clamps;
- pendant.
These tools are also used when it is necessary to fix the pipe on floors or columns. With them, the gas pipe in the kitchen will be properly installed. Installation norms and rules that establish the distance between fasteners are prescribed in special documents.
Safety
Usually, the gas pipeline system in the apartment is approved by the premises planning documents. Options for transferring and decorating a gas pipe in the kitchen can be offered by the master, and the owner will choose the most suitable type of work. Usually they are fixed on the walls. But if you use any changes, move or cut the pipe, then safety standards should be taken into account.
During repairs, when work is being done on the wiring of the system, there is a possibility of an accident. Therefore, if the transfer of the pipe is associated only with improving the appearance of the room, then it is better not to implement this idea. It can be applied in case of technical malfunctions.
If it was decided to carry out changes to the gas supply system, then work should be carried out at a time when there are not many people in the room. If the activity is carried out by specialized companies, the owner of the premises can familiarize himself with certificates confirming the skills of employees. In this case, it is safe to work.
All activities related to cutting, transferring, fastening pipes must be carried out with the provision of an act of work done. And only then can you be surethat nothing threatens oneself and loved ones.
General norms
For the kitchen to be a safe place, you need to familiarize yourself with the generally accepted rules. They allow you to properly operate the gas system. If everything is properly equipped, the premises are safe.
Plates are installed in rooms whose height is 2.2 meters and above. When the ceiling is sloping, then for the equipment you need to choose the area of \u200b\u200bthe kitchen that meets the norm. The room should have a window with a window, which will allow repair work to be carried out without the use of artificial lighting. This will ventilate the kitchen. Having ventilation would be a great advantage.
Between the plate and the opposite wall should be from 1 meter. If the ceilings and walls are made of materials that are prone to burning, then they must be treated with plaster. The plates can be used in kitchens separated from the hallway by a wall or a door.
Piping should be done in such a way that there is more than 7 cm between the wall and the slab. There may be a branch to the slab, but only at the level of the connecting fitting. The disconnecting device is mounted above 1.5 meters from the floor, and 20 cm from the side of the stove. A special flexible hose is used in the installation of equipment. It must be changed, taking into account the advice in the equipment passport.
Cost of services
No matter how much the service costs, only a professional should carry out the transfer of the gas pipe in the kitchen. The price of services can bedifferent, it all depends on the company, the complexity of the work. In any case, you should not skimp on this.
Cutting gas pipes costs between 2500-3500 rubles. Transfer work has a price within 6500 rubles. Also, a fee may be charged for each additional meter - from about 1,500 rubles.
Pipe masking
You can hide communications if the gas pipe was transferred. Rules and requirements must be followed. It is easier to hide the system when repairing, replacing furniture. There are several proven ways to do this. The simplest is the method of sheltering furniture. Thanks to the pencil cases, it will be possible to hide the riser in the kitchen. Communications will not be visible, and besides, they will be freely accessible.
Another good solution is to install a decorative pipe box. This design is inexpensive compared to buying furniture. This method is perfect for those people who can make such gizmos. For the manufacture of the box, wooden blocks and a metal profile are used. Decorative panels are fixed on it.
If the room does not allow the installation of bulky structures, in order to hide communications, decor can be applied to the pipes. This will perfectly decorate them so that the kitchen is always cozy. You can use bright magnets. The painting with unusual patterns looks beautiful.
Regular painting of pipes will do to match the design of the room. Heat resistant paint works great. A common method of covering pipes isuse of drywall. Only any method should ensure the safety of the premises.
