Interior decoration of the house is considered a time-consuming and complex process. In order for the results of the work to be of high quality, it is necessary to follow some of their sequence. Finishing the house is divided into rough and fine. The purpose of the first is to eliminate the shortcomings of the floor, walls and ceiling. It is possible to start its implementation only after dismantling unnecessary structures, cleaning the area of \u200b\u200bthe room and erecting all partitions. Even before the start of the rough finish, it is necessary to determine:
-
construction home decoration Future location of switches and sockets, equipment, electrical appliances, wall and ceiling lights, computer, TV, telephone.
- Type and size of interior doors.
- View, model, and installation location of plumbing equipment.
- Type, type of material for finishing ceilings and walls.
- Type of floor covering for all rooms.
Particular attention should be paid to laying underfloor heating. For him, a tile or porcelain stoneware finish is more suitable. These materials are the best conductors of heat. The screed is carried out using dry modified mixtures. In places where furniture will constantly stand, underfloor heating is not needed.
When choosing materialsfor a rough finish, you should immediately consider the quality and
properties of finishing coatings. For example, different materials are used for the floor in different rooms. Tiles, deck boards, carpets have different coefficients of expansion, thickness, and laying method. In order for the resulting floor surface to be even, it is necessary to take into account all these factors when determining the height of the screed. It is clear that the decoration of the house is carried out, starting from the ceilings. There are some peculiarities here. Ceilings that have a deviation from the horizon of not more than 3 cm are leveled with putty. For larger slopes, drywall is used.
Finishing the house at the second stage is the alignment and filling of the walls. For leveling, special mixtures or coarse putties are used. After that, irregularities remain on the surface. Their depth should not exceed 3 mm. They are removed by spatula. Depending on the finish coatings, the amount of puttying work varies. If the walls are prepared for painting, then putty 3-4 times. If under textured wallpaper, then 2 times is enough. Primer - the final stage of rough work on wall decoration. After it, the surfaces are less prone to deformation.
Construction, decoration of houses is a long process. But when doing rough work, there should be no haste and fuss. This is fraught with financial and time costs. It is necessary that each applied layer dry well. Then the connection with the next, whether it be putty, plaster, primer, will become strong. It is categorically impossible to dry artificiallyor leave mortar in direct sunlight. This will cause internal stress and cracking of surfaces.
If enough money was invested in a house with a rough finish, and the work itself was done without haste and fuss, then the fine finish will be easier and faster. And you won't have to think about repairs for many years.
