The cost of concrete makes many private builders think about the use of substitutes for this material. The modern market is constantly updated with new developments that help make work easier by improving the quality of built houses. Among these new products, one can single out a concrete substitute, which is produced under the Hilst brand. During its existence, he managed to gain popularity and received positive feedback from customers. It is used for fastening vertical supports, as well as horizontal bases. In the first case, we are talking about poles that are used to install fences, as well as signs and signs. In the case of horizontal bases, we can talk about elements of plumbing systems.
Concrete Substitute allows for reliable installation of the described structures in places where the use of traditional concrete may be difficult. Such cases extend to the taiga, permafrost, and mountainous areas.
Key Benefits
When it is necessary to build fences or install supports, there is a need to firmly fix pipes or poles in the soil. For this, the most commonly used technology to this day is the installation of elements using ordinary concrete. At the same time, a hole is dug into which a support is installed, and the resulting hollow space is filled with a sand-cement mixture. This technique has proven itself quite well, but it has many disadvantages, among the main ones one can single out a long period of solidification of the solution. In order to wait for strength, approximately 28 days should pass. Among other things, such work on mixing the sand-cement mixture is laborious and entails the occurrence of a large amount of dirt and dust. In order to mitigate the shortcomings of this method, attention should be paid to a concrete substitute. This system allows you to install support poles and rods without unnecessary dust and dirt in the shortest possible time. As for the strength of the structure, it will be even higher than that achieved with concrete.
Additional benefits
The described material has unique characteristics that allow it to harden within just 5 minutes. Due to its strength, this substitute allows you to save money, because its consumption can be reduced by 40 times compared to traditional concrete. The composite composition is sold in convenient packages that are easy to load and unload, as well as transport. If we compare it with a conventional cement-sand mortar, then the concrete substitute is absolutely safe, it does not corrode and rot the base made of wood. If you mix the two components, you will be able to get a composition that allows you to quite firmly and quickly fix the supports in the soil.
Why else should you buy Hilst brand replacement grout
If you still can't decide whether to buy Hilst concrete substitute, then you need to pay attention to the additional advantages that the mixture can be used even in severe frost, when the thermometer mark drops below -25 degrees. Among other things, the solution is environmentally friendly, it is not capable of harming human he alth, as well as the environment.
Instructions for use
If you decide to purchase a Hilst concrete substitute, it is recommended that you first familiarize yourself with the features of its use. This analogue of concrete can be obtained by mixing the two components that are supplied in the kit. As a rule, the manufacturer makes them in powder form. In order to achieve a strengthening of the supporting structure in the soil, which can be a pillar, it is necessary to prepare a hole. Its dimensions should be slightly larger compared to the diameter of the column. Due to the fact that the consumption of material is negligible, this difference should not be too large. The master installs a pole in the finished pit, and then in a plasticcontainer mixes the ingredients. The resulting mixture is poured into the pit.
Specialist recommendations
In order to prepare Hilst concrete substitute, you need to use a drill with a mixer attachment. When the ingredients are mixed, a chemical reaction will begin, while the substitute will increase in size. Ultimately, the composition will fill the hollow space, penetrating into all the voids of the soil. The master is only required to hold the support in a vertical position. As practice shows, the installation of pillars takes quite a bit of time. If we are talking about one support, then it will take about 5 minutes. An hour after fixing, other elements can be attached to the pole. During this period, the substitute will gain the design level of strength.
Tempering Instructions
If you will be installing poles using the described cement-sand mixture substitute, then you should take into account some of the recommendations given by the manufacturer. Thus, with a composition volume of 1 liter, the volume of the finished mixture after expansion will be 14 liters. The components must be mixed for 15 to 30 seconds. The chemical reaction and expansion will start after 45 seconds. The composition will reach full expansion in 3 minutes, and 80% strength will be achieved within 5 minutes. After 3 hours, you can count on full strength, while the compressive strength is 660 kPa. A similar amount of cement is equivalent to 40 kilograms.
Cost
By visiting the store, you can find out that manufacturers offer for sale three varieties of the described material, each of which is intended for a certain amount of work. For example, "Hilst-standard" will cost about 750 rubles. per package, but the Hilst professional concrete substitute costs 6,500 rubles. for 10 liters. You can purchase another variety, which is known as Hilst expert, for 40 liters of this composition you will have to pay 24,000 rubles. The first variety of those listed is used in private construction, other types of composite composition are used by companies that are engaged in the construction of large facilities. Due to the lower consumption, the described substitute is economical, which allows it to be one step ahead in comparison with cement mortar.
Flaws
The cost of concrete should also interest you if you intend to carry out construction work. For a cubic meter of this material, you will have to pay 2800 rubles. Before starting manipulations, you can make a comparison, which will allow you to understand which material will be more beneficial to use. It is worth remembering that the use of substitutes can be quite expensive. As practice shows, the benefit is observed only when the use of analogues allows you to achieve those properties of the concrete mixture that are necessary for certain work. If you want to use concrete analogues to reduce financial costs, then you should not count on it much, since these substancescan be compared in cost with cement, and in some cases they are even more expensive, which is not profitable.
