The modern Russian plumbing market presents a large selection of high-quality steel bathtubs. Among domestic manufacturers, a prominent place is occupied, according to reviews, by Donna Vanna bathtubs, which are of high quality, affordable price and a variety of shades. Consider the advantages and disadvantages of steel baths from the Verkh-Isetsky Metallurgical Plant, the company's product range. Find out how to install and maintain the product and what users of the products say.
Advantages and disadvantages of steel bathtubs
The secret of the popularity of steel bathtubs lies in the large number of advantages. According to reviews, Donna Vanna bathtubs are affordable, so most Russian citizens can afford their purchase and installation, which is also not difficult.
Pluses of steel structures forbathroom:
- Light weight - in most cases, the design does not exceed 50 kg (this minimizes the cost of transportation and installation);
- strength and durability. Steel is a fairly strong and lightweight material, so the bathtub will last at least three decades if properly cared for;
- are not subject to temperature differences. Steel is a heat-conducting material, so it heats up quickly, but cools down just as quickly.
Despite the mention of numerous advantages in the reviews of Donna Vanna from VIZ, users note that it also has disadvantages, like any steel structure. The enamel of the bowls, regardless of color, has a smooth surface, so chips and cracks can form on it. It is better not to wash the steel bowl with abrasive or aggressive products.
Assortment of bathtubs from Donna Vanna
Bathtubs of domestic production from VIZ OJSC (Verkh-Isetsky Metallurgical Plant) are presented in different colors, but have standard sizes.
Brand bath sizes:
- 150/170 × 70 × 40 cm - available in these colors: summer sky, blue lagoon, sea wave, mint green, Caribbean pearl;
- 105 × 65 × 35.5 cm, 120/170 × 70 × 40 cm (standard width) - white orchid;
- 150/170 × 75 × 40 cm (extended width) - alsopresented in snow-white colors.
In reviews of "Donna Vanna" "white orchid", users note that this is a beautiful milky white color that will suit any room design. Some oversized designs come with extra handles to make them easier to use.
Advantages of a domestically produced bathtub from JSC VIZ
In the steel baths of the Donna Vanna brand there is a special plate, which minimizes vibration when taking in water. It also results in a noticeable reduction in noise levels without changing the structure of the structure.
Additional comfort during operation, as users note in reviews of the Donna Bathtub, is provided by handles on the sides, but they are only available in products with increased width.
Brand Benefits:
- variety of colors;
- quality guarantee for products up to 10 years;
- high-quality enamel contains an antibacterial component, which reduces the risk of bacteria on the surface of the bowl by 85%.
According to customer reviews, Donna Vanna is a good combination of price and quality. The cost of the company's products varies from 3 thousand rubles to 7 thousand rubles, depending on the size and color.
Installation
In order to install a steel bath, you do not need expensiveequipment. With some experience, you can fix the bowl yourself, since it is placed on the legs.
The steel bath can be installed in three different ways:
- along the wall is the most common option;
- in the corner - for small spaces;
- in the center - most often this method is chosen by owners of country houses or elite, large mansions, but here it is better to prefer oval or round designs.
The type of installation directly depends on the chosen model, interior design in the room, as well as the availability of space. It is important that the floor is level and that all connections are tight. In reviews of the Donna Bath steel bath, users note that the legs on which the bowl is installed are quite fragile, and any difference on the floor will significantly affect the stability of the entire structure. Therefore, it is first advised to perform a floor screed.
To prevent the bath from loosening, you can additionally use iron supports that are attached to the wall. The junction of the bathroom and the wall is also hermetically processed. This can be done using a flexible wall plinth. It is worth paying attention to grounding to protect yourself from electric shock.
Bathtub installation
Installation of a bathtub to the water supply system takes place in several stages. First, the support stand is installed, and then the electric potential.
Base stand accessories:
- drain area support - 1 pc. regardless of the dimensions of the structure;
- back area support - 1 pc.;
- gasket –4pcs;
- M6 × 30 / 40 bolt - 2 pcs.;
- washer 6 and spring washer 6 - 2 each;
- M6 wing nut – 4 pcs;
- M10 × 55 bolt - 4 pcs.;
- Gang M10 - 8-12 pcs.;
- plastic plug with insert - 4 pcs;
- cup and washer 10 – 4 pcs
The tub must be turned upside down and placed on a soft surface so as not to scratch the sides. Next, bolts with nuts are installed, plastic plugs or cups on them. A protective plastic cover is removed from the mounting bracket and a bolt is installed in the T-shaped slot. To install the drain area, you must first fix the gaskets on the radius surface of the support, and then put it on the M6 × 30 bolt, which is pre-installed in the bracket hole. Next comes the installation of the washer, spring washer and lamb nut.
In order not to damage the surface of the bath, everything is screwed without tools. Similarly, it is worth doing all the operations with the support of the back area. After that, it is worth avoiding the load on the bath until it is fully installed. The upper level is adjusted using the M10 × 55 bolt, after which the M10 nut is tightened.
To install the electric potential you will need:
- conductor (clamp) 20 cm long - 1 pc.;
- conductor (length 15 cm) - 1 pc.;
- M6x30 and M6x16 bolts - 1 each;
- M6 nut – 2 pcs
The protective plastic cover must be carefully removed from the tub transport bracket. Then clean the contact points from paint and scale. Next, the electrical potential conductor is attached to the pipe with the supply of cold water and the clamp (for thisyou will need a bolt and nut).
Care
The manufacturer of bathtubs OJSC VIZ gives a ten-year warranty on its products. But it is noted that the design can last much longer if you follow simple rules of care. This is also noted in customer reviews of the Donna Bathtub.
The rules of care are as follows:
- do not use hard brushes or products with abrasive elements to clean the bowl;
- aggressive liquids, acids, alkalis are also not used in the bathroom, as they can violate the integrity of the structure;
- you need to protect the product from mechanical damage (hit by heavy or sharp objects);
- be sure to keep the bowl dry when not in use as even a small amount of water at the bottom can cause stains, streaks and even rust;
- bathtub cleaners must be acid-free;
- from yellowish stains on a snow-white steel bathtub, which can appear over time, a weak vinegar solution will help to get rid of;
- baking soda mixed with water to a paste can get rid of rust.
Donna Vanna: customer reviews
Users note that these products of a domestic manufacturer are not inferior in quality to European counterparts. "Donna Vanna" is an excellent combination of price and quality, so you should not overpay for a foreign brand. In addition, the assortmentThe company's products are so wide in size and colors that it is able to satisfy the taste of even the most demanding customer. Installation and installation of the structure are easy and effortless.
