Bulgarian is an electric tool with which you can perform a large amount of construction work. It cuts metal parts, stone and other hard materials. It can clean and grind surfaces, cut ceramic tiles to size. This tool is indispensable for installation, construction and repair work. Use it for home and workplace.
Safety rules
Bulgarian is a dangerous item with huge turnovers. If you do not follow the rules of use, you can be seriously injured. Before starting work and making a homemade rack for the grinder, be sure to read the safety rules.
1. When cutting hard materials, various particles of metal or stone, sharp fragments fly out from under the abrasive wheel. The first reliable remedy for debris flying into the face of the master is goggles. There are times when the circle itself breaks. Fragments can hit the glass and break it, so glassesmust be reinforced, with a protective mesh. Don't be stingy, it's your he alth.
2. On the grinder, you must have a screen surrounding the knives. Some workers, putting on a circle of large diameter, remove the casing that interferes with movement. Also, when making a stand for a grinder with their own hands, they can generally get rid of it. Under no circumstances should this be done. It is placed without fail and in such a way that the operator is behind it. Thus, the fragments are repelled from the casing and fly in the opposite direction.
Stand for grinder
When working with this tool, many craftsmen have to perform the same identical cuts. Holding it in your hand, it is very difficult to achieve evenness of the strip. Strong revolutions and vibration do not allow a person to keep the product in exactly one position, the hand will definitely move. To prevent this from happening, they buy a rack for the grinder.
But under strong constant loads and vibrations, the parts of the stand become loose and crack. Yes, and it is designed mainly to work with a circle of a maximum of 125 mm. The big one won't fit. If you want a strong and reliable grinder stand, then the best option would be to make it yourself. Do-it-yourself production will add confidence in the quality of fasteners, the master will work calmly.
Small device for home use
This do-it-yourself grinder stand is made only for home use, for small jobs. It is made from plywood and wooden blocks. The tool itself is installedstationary and not moving. Take two sheets of plywood. A grinder is fastened to the lower square with clamps and a bar is screwed in the form of a stand.
The second part on the furniture hinges is placed on top. A slot is cut for the abrasive wheel. The advantage of this arrangement is that the master does not hold the tool in his hands. Also, the circle is partially visible and will not be able to fly out, causing injury to the operator. Such an easy-to-use device is suitable for cutting small metal corners, aluminum profiles, ceramic tiles.
Welded metal construction
When making this model, you need to have a drawing of a stand for an angle grinder of your size.
Work is being done from a metal profile and tubes using a welding machine. The platform for the stand should be heavy, it can withstand high power vibrations. Next, the upper part is made, to which the tool itself is attached along with the casing. The structure is bolted to the welded corner on two metal legs.
In order for the stand for the angle grinder to move smoothly, the top and bottom panels are connected with a strong spring, for which holes are drilled. A guide corner is welded onto the platform at right angles to the circle.
Pendulum Stand
What is good for a grinder in the form of a pendulum is the simplification of the sawing process. Due to the emphasis on the table and the system of thisconstruction, you can perform work of varying complexity and trim materials of any density. With such a device, you do not need to make special efforts, the pressure is carried out by the mass of the tool itself.
For the manufacture of this version of the stand, you will need a spring, two hinges, a metal profile, corners and a welding machine. It is also desirable to have a strong iron table on which the entire structure can be installed. Having the skills of such works, the master will quickly make such a pendulum. It is much easier to work if the handle is long and comfortable. The fingers are kept at a safe distance. No bending required. Sparks and debris fly in the opposite direction. Yes, and having a free approach to the table, you can work with large-sized materials and products. This is convenient and allows you to perform a variety of processes.
When choosing a rack that suits you in all respects, do not forget about safety. Then work will bring only joy.
