At the moment, the design of the ceiling surface is quite diverse. There are modern finishing materials that are used in the course of work. Despite this, the plasterboard ceiling in the hall is very popular. This material not only allows you to make the surface perfectly flat, but also create real masterpieces on the ceiling.
Varieties of plasterboard for the ceiling
Drywall is a material that can be used in finishing work. If earlier its range of application was limited only to leveling wall surfaces, today, thanks to its large assortment, it is possible to create suspended ceiling structures. Examples of the design of plasterboard ceilings in the hall are quite unique and are presented in the photos posted in the article. But, in principle, it all depends on the designer's imagination.
There are several types of drywall that are used in the creation of a false ceiling:
- ceiling;
- perforated;
- arched.
These specieshave proven themselves in renovation work. They have different technical properties and characteristics. Also conditionally, the material can be divided into:
- moisture resistant;
- flame retardant.
Gypsum board for the ceiling can be of both types.
Material advantages
Gypsum plasterboard ceiling has a number of characteristics. It is they who distinguish it from other finishing materials. The plasterboard ceiling in the hall, as mentioned earlier, can be of different types. And it does not depend on the type of material.
Any drywall ceiling:
- durable;
- reliable;
- easy to install;
- cuts easily;
- withstands any load.
Material sizes may vary.
Advice. When choosing the parameters of drywall sheets, it is worth considering the dimensions of the room itself.
Benefits of plasterboard ceiling
Gypsum board ceiling in the hall has excellent performance. They are similar to the properties of the material itself. It is also worth noting that the suspended plasterboard ceiling can be freely combined with other finishing materials for the ceiling surface. For example, the design of plasterboard ceilings in the hall looks quite interesting in combination with tension structures, both fabric and film.
Important. You can make the design of the ceilings of the hall from drywall yourself. Then it is easy to mount it on the ceiling surface with your own hands.
Varieties of suspended plasterboard ceiling
Gypsum ceiling in the hall can be:
- single-level;
- two-level;
- layered.
By choosing one of the proposed options, you can create truly unique plasterboard ceilings. The photo gallery of the hall with such designs, presented on many relevant resources, is so diverse that you will have to think hard before finding a suitable design for yourself.
Characteristics of single-level plasterboard ceilings
Single-level plasterboard ceilings are the simplest designs. They are made in a flat plane and serve only to level the ceiling surface. Provides the ability to mount a variety of lighting fixtures.
Advice. If there is a desire to make a single-level ceiling original in lighting, then the wiring for such purposes is laid initially, even before the installation of the ceiling structure begins.
Characteristics of two-level plasterboard ceilings
Such plasterboard suspended ceilings (the hall, by the way, is the room that is most suitable for their installation) are more complex structures. In them, the material is located on two levels, the first of which is the main one, and the second serves to decorate the ceiling surface.
Due to the fact that drywall can freely take any form, onthe first level has the ability to create rounded, square, rectangular and other designs. Not spared decorative lighting and this type of ceiling surface. With its help, two-level ceilings help to visually divide the space into functional zones.
Multilevel surfaces
In this case, it is worth noting that not only drywall is involved in the manufacture of the ceiling. It can also be a rough concrete ceiling, which serves as the basis for the ceiling structure. Drywall sheets are mounted on its surface in some places. Stretch ceilings or other sheets of material are already attached to them, which create its subsequent levels.
Advice. When choosing this type of ceiling surface, you need to immediately consider the design. And only then decide on the choice of materials.
Multi-level plasterboard ceilings (the photo gallery of the hall mentioned above will help you make a choice) allow you to decorate the room in an unusual stylistic direction.
Important. Plasterboard suspended ceiling is suitable for almost any room. Only here there are some nuances.
Where not to do?
Of course, everything will depend on whether the type of material is moisture resistant or not. But professionals recommend not to use this type of ceiling surface in rooms with high humidity. Especially if the structure on the ceiling is not securely protected by finishing materials.
What materials are used to finish sheetsdrywall?
Paint is used to finish the plasterboard surface. It is best if it is water-based or acrylic.
Advice. In wet areas, acrylic paint is used, which has a dense structure after drying.
Also, the ceiling can be pasted over or plastered with a decorative agent. In this matter, everyone focuses not only on their financial condition, but also on the overall interior design.
What should I do before installing a plasterboard ceiling?
Many want to install plasterboard ceilings in the hall. Not everyone knows how to make such a design correctly. Let's talk briefly about the main stages. It is necessary to initially carry out preparatory work. Includes:
- preparation and cleaning of the surface from the old finishing material;
- choice of profiles for mounting drywall sheets;
- accurate calculation of the material for the manufacture of the ceiling structure.
Preparatory work for false ceiling installation
Initially, the surface must be cleaned of the old finish:
- plaster is removed with a special tool;
- whitewash - wash out;
- wallpaper removed with a spatula.
Advice. These measures are necessary in order to make a high-quality suspended ceiling structure. Otherwise, the old finish may crumble over time.
Then the surface is washed with soapy water, after which it shoulddry out. Then it can be primed with a special tool.
How to calculate the required amount of material for a plasterboard ceiling?
When calculating sheets of drywall, the quadrature of the room and the size of the material itself are taken into account. For example, the area of a room is 18 squares. Drywall sheets are 1.25x1 m in size. Accordingly, about 15 sheets of material will be needed per room. The number of profiles is calculated based on the length and width of the room. You also need to know if the ceiling will have a second and third level.
Installation of plasterboard ceiling
There is nothing difficult in these works. To complete them you will need:
- gypsum board sheets;
- stationery knife;
- profiles;
- wide head screws;
- level;
- pencil and ruler;
- dowels;
- screwdriver;
- perforator.
Initially, indoors, using a building level or a plumb line, the zero point for mounting profiles is determined. All this is necessary for the reason that in the building there are not always equivalent parameters of walls and ceilings. This will make it possible to make the ceiling plane perfectly flat.
Further, the profiles are attached according to the established marks. This can be done with a puncher and dowels. A kind of metal profile frame is formed on the surface, the width of the cells of which should not exceed 50 cm. Plasterboard sheets are already mounted on it, which can be easilycut with a simple clerical knife.
Advice. In these works, you need to be extremely careful with the material. Inside it is a plaster layer, which in case of impact will be deformed.
Rough plasterboard ceiling finish
Such work is also within the power of even a non-professional. The joints of the sheets on the surface of the frame of the profiles are treated with plaster or putty. After it dries, you need to go through these places with sandpaper to remove the unevenness of the application of the solution.
After that, the drywall surface is primed, then a fine finish is performed.
