Electric type planers are great for planing boards as well as bars. The company "Interskol" offers customers a variety of models that are perfect for both professionals and beginners. When choosing a device, you should pay attention to the size of the knife, rated power and speed. The dimensions of the planers are quite different.
Some models have a separate nozzle for chips. The tool frame is most often made with a lining. Some modifications use an adjustable starter. For professionals, such devices are great. The model costs on average about 8 thousand rubles.
Instructions for using the tool
Before using the tool, it must be adjusted. For this, a knife is exposed, which is located at the bottom of the structure. The height of the plate is adjusted by a rotary mechanism. The chip nozzle must be open. Before connecting the tool to a 220 V network, it is important to make sure that the start button is not turned on. After connectionmodel exhibited power. If necessary, the height of the plate can be adjusted.
Model repair
Most often, the rotor breaks on planers. The specified element is located near the motor. In order to repair the tool yourself, you will have to use the key. First of all, the protective cover is removed from the bottom side of the case. After that, the starter is removed directly. The next step is to twist the lining. Behind it is a rotor, which is mounted on screws.
After detaching a part, it is checked for defects. If the device is burned out, black marks will be visible on it. In such a situation, the model cannot be repaired. Also, the problem may be a breakdown of the capacitor, which is located inside the rotor. Its performance is checked with a tester. If the threshold resistance value is below 30 ohms, then the rotor will have to be completely replaced.
Description of the planer "Interskol R-110"
Indicated planers (electric) "Interskol" reviews, as a rule, get good. The power of the tool is 3.5 kW. If you believe the reviews of experts, then the model is great for jointing boards. The holder in the device is used with a latch. If necessary, it can be adjusted in height. The model plate is located under the motor.
According to the owners, the rotor breaks very rarely. The device has a system of protection against dust and moisture. The model is suitable for processing pine boards. Knife set4.7 cm wide. Setting up the Interskol planer does not take much time. The reducer is applied collector type. The standard tool kit includes a ruler and a wrench. If you believe the reviews, the bottom cover can be removed without problems. You can buy this instrument on the market at a price of 7800 rubles.
Reviews about the model "Interskol R-102"
Reviews about the Interskol R-102 planes can be found in a wide variety. They are not suitable for professional use. The motor in this case uses low power, and the maximum frequency indicator is 1500 rpm. For processing pine boards, the model is often used. The rack is not installed very wide, and the modification weighs a little. The width of the knife is 5.2 cm. There is no holder in this case.
The tool does not have a moisture protection system. If you believe customer reviews, then problems with overheating of the motor are observed infrequently. The plate in this case is easily adjustable. The handle is used with a polymer lining and does not slip in the hand. The tool frame is made of stainless steel. The model is suitable for processing pine bars. Of the shortcomings, it is important to mention the high noise parameter. At maximum speed, the model produces as much as 77 dB. You can buy the specified hand planer "Interskol" at a price of 7 thousand rubles.
Parameters of the planer "Interskol R-105"
Planer "Interskol R-105" has a massbenefits. Specialists praise him for a quality knife. The plate is included in the standard set of the adjusting type. The controller of the tool is installed in the front of the structure. According to buyers, knives can be adjusted very quickly. The network cable is used without a holder. The planer comes with a compact wrench. You can twist the bottom cover of the tool without any problems.
Dust protection system available. The branch pipe in this case is located near the base of the planer. The permissible operating temperature is a maximum of 45 degrees. The width of the knife is 5.4 cm. The starter at the planer is used with a controller. Instructions for the planer "Interskol R-105" are included in the set. The reducer is used with a through capacitor. The model does not have a moisture protection system. The user is able to buy a planer of this series at a price of 6700 rubles.
Description of the planer "Interskol R-82TS-01"
The planer of this series is ideal for repair work in the house. Among the features of the modification, it is important to mention a high-quality handle. The lining in this case is made of polymer. If you believe the reviews of experts, then the motor of the model is of high quality. The model is suitable for processing maple boards. The holder in this case is made of plastic.
The width of the knife is 4.6 cm. If necessary, the user can adjust the angle of the plate. The power cord has a length of 1.2 m and does not interfere during planing. The stand is made entirely of stainless steel. The controller of the model is used with a starter. Buy planer atour time is available at a price of 7900 rubles.
Reviews about the model "Interskol R-55"
The planer of this series reviews are mostly positive. For professionals, the model is great. The power cord in the device is used with a holder. According to buyers, the plate is adjustable without problems. You can always clean it if necessary. The system of protection against dust is not provided. The motor power is as much as 4.6 kW. The frequency at the same time reaches a maximum of 2300 rpm.
The gearbox in the tool is used with a controller. The speed controller is located in the front of the structure. The tool has a moisture protection system. The starter is wired. The width of the knife is 4.7 cm. The angle of the plate can be adjusted without problems. The permissible temperature level during operation is 40 degrees. The key for removing the plate is included in the standard kit. You can quickly disassemble the Interskol planer. The rotor is used with a cover. You can buy a planer of this series at a price of 7800 rubles.
Parameters of the planer "Interskol R-82TS-05"
Another model of the trade mark "Interskol" - planer R-82TS-05 - is produced with a power of 4.3 kW. In this case, the maximum frequency reaches 1400 rpm. The reducer of the model is used with the controller. If you believe the reviews of experts, then it rarely breaks. It is also important to note that the model uses a plate overheating protection system. For processing maple boardsplaner fits great.
The moisture protection system is applied to the third degree. The starter in the device is of high quality. The width of the knife is 4.3 cm. In this case, it is not possible to adjust the angle of the plate. The starting system is provided with a rotor. You can buy this planer in a specialized store for 6300 rubles.
Reviews about the model "Interskol R-66"
What other models does Interskol produce? Planer R-66 has a lot of advantages. Among them, it is important to note the compact size. The handle of the model is made with a high-quality polymer lining. The stand is made of stainless steel. The planer does not have a soft start system. For planing bars, the model fits perfectly. The dust protection system in the device is of the third class. According to experts, the rotor of the model is used with a through capacitor.
It cools very quickly, so you can use this tool for a long time. Among the shortcomings, it should be noted the high power consumption parameter. The planer does not have a moisture protection system. The rotor is used without a controller. The width of the knife is only 4.2 cm. It is not possible to adjust the angle of the plate. The user is able to buy a planer of this series at a price of 6 thousand rubles.
Parameters of the planer "Interskol R-80"
What else can the trade mark "Interskol" offer to its customers? Planer R-80 is most suitable for processing bars. He has a regulatorused with a controller. In this case, the protective plate is made of stainless steel. The handle is applied with a polymer overlay. According to buyers, the capacitor very rarely overheats. The moisture protection system is second class. If we talk about the parameters, it is important to note that the power of the planer is 3.6 kW.
Frequency with a maximum of 1800 rpm. For processing oak boards, the model suits perfectly. The dust protection system used is quite high quality. The stand is made of plastic. The rotor of the model is located at the rear of the structure. The model weighs only 3.2 kg. The standard planer set includes a key to remove the plate. The knife on the tool is quite easy to replace.
In the event of a motor breakdown, it is better to repair the Interskol planer at a service center. Of the shortcomings, it is important to note the lack of a plate tilt regulator. The noise level is 79 dB. The planer has no voltage overload protection. The user is able to buy a tool of this series at a price of 6 thousand rubles.
Description of the Interskol R-23 model
The R-23 planer is well suited for processing pine bars. Also, the model is able to perfectly cope with oak boards of various sizes. The reducer of the model is of the contact type. The controller is located in front of the frame. There is no stand in this case. If you believe the reviews of experts, the plate is very easy to adjust. The width of the knife is 5.3 cm. The angle of the plate can be adjusted. Power cordused with holder. The standard planer set includes a key.
The moisture protection system is used in the third class. The handle of the tool is provided with a polymer overlay. The starting system is of high quality. However, it is important to note that there is no plate height adjuster. The model is not suitable for processing cedar products.
The noise level of the planer is 67 dB. It is more expedient to repair the Interskol planer in a service center. The dust protection system is not provided by the manufacturer. The user can buy a planer of the presented series at a price of 7500 rubles.
Description of the planer "Interskol R-86TS"
This is a compact and inexpensive planer. The power of the tool is 4 kW. It does not have a moisture protection system. If you believe the reviews, the rotor is used with a quality controller. The power regulator is located at the front of the base. The network cable is equipped with a holder. The width of the knife is only 4.3 cm. If you believe the experts, the plate is adjustable without problems. You can buy a model in our time for only 5700 rubles.
