In order to figure out how to glue non-woven wallpaper on the walls, you must first delve into their features. This type of material differs significantly from paper, the usual type.
In contrast, the non-woven base is very heavy, as a result of which it is necessary to use a special glue that will not allow the wallpaper to fall off the walls. One of the biggest advantages of this type is their thickness, which is many times greater than other types. Thanks to this, not only can you not use pre-putty walls, but the usual bubbles and wrinkles are almost impossible. Also, this wallpaper is strong enough that it will not break in the most inappropriate place.
If in most cases with other wallpapers the glue is applied directly to the base itself, then it is enough just to smear the walls well.
Now you can start the basic gluing technologies. In order to understand how to properly glue non-woven wallpaper, you need to knowa few basics. Often this type of material is chosen in order to hide large wall irregularities. As mentioned earlier, the non-woven base is quite thick and helps to combat this problem, especially when a coarse texture is selected.
Next, you need to prepare your walls for applying glue. Sometimes the question arises of how to glue non-woven wallpaper if there are potholes on the surface. In such cases, it is still worth using putty and repairing them.
Now that the walls are ready, you can start cutting off the required length of wallpaper. In this case, it must always be remembered that this type of material, unlike similar ones, does not have tensile or shrinkage properties. Therefore, it is worth measuring the distance accurately several times, only then make an incision.
In order to fix the wallpaper on the wall, you need to apply a special glue on it. Next, we take a dry canvas and apply it to the base, you can use a roller to make contact better. Due to the fact that the glue does not need to be applied to the wallpaper itself, the work time is significantly reduced, since it is much easier to glue non-woven wallpaper in a dry state.
It is also worth noting that in most cases these wallpapers are used for painting. Thus, the question immediately arises of how long they dry. Painting non-woven wallpaper will be possible in a day. Of course, in the best case, you should wait longer, because it all depends on the factors that will contribute to drying. The most important,so that there are no drafts, otherwise you will again have to remember how to glue non-woven wallpaper.
It is best to paint them with acrylic or water-based paint. A fur roller is also used, which provides better texture overlay and impregnation. Another type of roller - velor - will paint only the protruding surface of the wallpaper. You can apply both types, thereby getting a two-tone surface and creating an interesting pattern. For this, various wallpaper surface textures are selected.
