Sizes of parquet boards may vary. It all depends on the type of material. It is a wooden covering, which can be piece, mosaic, shield, as well as artistic or massive. This list does not include all types of parquet boards, which will be discussed below. In order to make the right choice, you need to understand the characteristics of each type, as well as learn more about sizes.
Sizes of piece parquet
The most popular type among fellows today is piece parquet, which is a plank with a locking connection in the form of ridges and grooves. The material is based on solid wood species. The thickness of such strips can vary from 15 to 22 millimeters, and the length can be equal to 50 centimeters. Among the advantages of such a coating, it is worth highlighting the possibility of repair,long service life, as well as a variety of laying technologies.
If you decide to choose piece parquet, you can choose one of the existing classifications according to patterns. The pattern can be fine, contrasting, often repetitive, textured, highly variable with different hues, and variable with slight knots.
Stacked parquet
The dimensions of mosaic-type parquet boards can be equal to 40x40 or 60x60 centimeters. In this case, the thickness varies from 8 to 12 millimeters. In the process of installation work, you can lay out a mosaic or drawing. The front side of such parquet is protected by paper, which is removed after laying. If necessary, increase the soundproofing characteristics of the floor. To do this, materials with the appropriate qualities are glued to the underside of the board.
This type of parquet board is divided according to the profile of the grooves. If there are oblique folds on all sides, then you have a material in front of you where a riveting is installed along the edge. Such products are the most durable. Reinforced fastening is installed along the perimeter of the bar, where there are oblique grooves. High strength can be obtained if you use a mosaic parquet board with fastening to a hard surface. At the same time, the planks are nailed to the base, and the panels themselves have grooves and ridges on both sides.
Sizes of panel parquet
Sizes of panel type parquet boards can reach 80x80 centimeters. This changes the thicknessfrom 15 to 30 millimeters. The front layer of such products is varnished. With their help, you can create square shapes and their derivatives.
Laminate thickness
Laminate is an artificial substitute for parquet boards. It has four layers. The basis is fiberboard and chipboard. The thickness of this material varies from 7 to 11 millimeters. The boards are quite easy to lay using the floating floor technology.
Sizes and characteristics of massive parquet
Massive board is made of solid wood and has a tongue-and-groove connection. The width of the products can exceed 8 centimeters, and the thickness - 15 millimeters. The length of the product reaches several meters. Among the advantages of the material are a wide range of colors, durability and a sophisticated appearance.
Standard sizes
There are standard parquet board sizes that determine the length, width and thickness of the product. The first parameter varies from 110 to 250 centimeters, the second - from 12 to 20 cm, while the third - from 1 to 2.2 cm. Often craftsmen use materials that have the above standard sizes.
What else do you need to know about sizes?
The size of the parquet board, the standard of which is determined by GOST 862.3-86, will be individual depending on the type of material. For example, Barlinek products have overall dimensions of 2200x207 millimeters. But if we are talking about Tarkett, then it offers floor coverings with a wider run-up in size. Youyou can meet the following dimensions of the board: 2215x164x14; 2283x194x14; 1123x194x14 mm. If you choose the large sizes of the Tarkett parquet board, you will be able to complete the repair work on finishing the floor in a short time.
Laying parquet boards
After you have decided what sizes of parquet boards are suitable for the premises of your home, you can start laying the material. If the thickness does not exceed 1.4 centimeters, then laying can be carried out in a floating way. Or by gluing to the base. If thicker boards are available, they should be glued. During operation, such a coating is polished several times. Recently, manufacturers are increasingly offering for sale materials with a tongue-and-groove connection, which allows you to create floating mounts. An additional advantage of this technology is the ability to replace damaged areas without dismantling all coatings.
Parquet board, laying, the size of which you can study yourself, requires an even base, excluding the presence of potholes, dried dirt and sagging. If the parquet board has a thickness that varies from 13 to 15 millimeters, you can use it to install a warm water floor. This belief is true if the system is in a screed five centimeters thick. The temperature should not exceed 27 degrees. Installation of the material can be carried out on the old parquet. However, the elements must be perpendicular to each other. Dimensionsparquet board and laminate were mentioned above. These values will allow you to calculate how much material you need to purchase. To do this, determine the floor surface area, and then divide this value by the area of \u200b\u200bone panel. This way you can calculate how many boards should be purchased. However, experts advise buying material with a margin of 15%.
For reference
If you decide to choose a parquet board option that does not have a locking connection, and its edges are even, then you will have to lay such a coating on glue. The composition is applied to the joints of the boards. They need to be securely pressed against each other. Wedges installed along the edges of the flooring ensure a secure fit.
Styling technique
Installation usually starts along a longer wall, which should not have doorways. The first board is located in the far corner. Wedges of the same thickness should be laid between it and the wall. There should be an 8 mm gap between the entire plane of the floor covering and the walls. The following boards are laid using the same technology. The next row starts with the remaining segment. It can be a piece of the board of the previous row. But if a drawing is provided, then it should be followed. You may need to cut off excess to match the ornament.
Boards should be applied with a lock to the previous row at an angle of 25 degrees. You should feel when all the castle connections begin to converge. Forto speed up the process, you should use an ordinary rubber mallet, with which the products are adjusted to the place. After assembling the flooring, you need to get rid of the wooden wedges that were previously placed between the boards and the walls. They will allow you to create a so-called temperature gap, which compensates for expansion with changes in humidity and conditions in the room.
