There are many decorative elements with which you can transform the interior beyond recognition. One of these are roller blinds. However, many people have a lot of problems with their assembly and fastening. And this is not surprising, because they have a rather complex device, without knowing which, it will be quite difficult to cope with everything. Let's try to figure out how to properly assemble roller blinds so that no one has any problems with this.
A few words about the type of mounting
Thinking about how to assemble roller blinds, you need to have at least some idea about the technology of their installation. Modern window systems can be mounted both on sashes and on load-bearing structures. It is very difficult to say for sure which method to choose, since here you need to take into account many nuances,the main among which are the features of the interior. It is recommended to stop at the method that will allow you to quickly and with minimal problems install roller blinds.
Where is the best place to mount?
Let's take a closer look at this. How to assemble roller blinds, you can read in the instructions. In this case, it is advisable to first study the technical documentation, since each model has a different device. However, there is no information in the manual for window systems about where it is best to mount them. Installation can be made on the frame itself or on a supporting structure, for example, in a window opening, above it, or even on the ceiling. But which one is better?
The most common is installation in a window opening, as it gives the room a more attractive appearance, but this method of installation has one drawback. If the curtain is lowered, then you will not be able to put the window on airing. Therefore, the best option in terms of practicality would be to mount the roller shutter on the sash. Before making the final choice, you must determine your own goals and wishes.
Bracket assembly diagram
What is she like? So, how to assemble a roller blind mount? The answer to this question is of interest to many people who first come across products of this kind. Assembly can be done with double-sided tape and self-tapping screws. The second option is more reliable, so it's best to useexactly him. When connecting the bracket to the platforms, press until it clicks. When the main structure is ready, it is fixed on the sash. Before this, the work surface must first be degreased with alcohol. When doing this, be very careful, because the adhesive tape is suitable for use only once.
After completing the assembly of the bracket and gluing it to the sash, a shaft is put on it, on which the fabric is subsequently wound. At the very end, the canvas is lowered and fixed on the sash. If you do not know how to assemble roller blinds, then in this case it is better to contact an experienced specialist. If the measurements do not correspond to reality, then the curtains will not work correctly.
Sequence of actions
Let's look at it in more detail. To talk about how to assemble a roller blind mechanism with your own hands, you must first say a few words about their device. The main component of this type of window light protection systems is a bracket, which is controlled by a mechanism driven by a chain. In some models, a fixation system is provided that allows the installation of roller shutters on opening windows. To hang and fix the curtains of this variety, you must first assemble the bracket. This is not difficult if you follow the instructions that come with the product. Further sequence of actions will be described below.
Assembly without box
How to assemble and hang the rollcurtain without mounting the main frame? Some models of blinds are sold unassembled, so you have to suffer a little with them. If you are dealing with such products, then the first step is to carefully study the instructions. The assembly process begins with threading the fishing line through the holes located in the corners of the frame. It is simply inserted into the shaft and fixed with latches. Further, all work is carried out along with the installation of the entire structure. The best option is to install the product directly on the sash, since in this case free space in the room is saved. How to hang roller blinds on plastic windows without drilling will be described in detail below.
Window systems installation process
So what do you need to know about this? To do everything qualitatively, it is first recommended to make all the necessary measurements. Roller blinds have a simple design, which is the main frame and the shaft on which the canvas is wound. If you ordered a project, and did not buy a ready-made window system, then the fabric will not need to be customized. Otherwise, it will have to be trimmed, and for this it is necessary to measure the distance between the horizontal edges of the canvas. It would be best to remove the fabric from the shafts, spread it on a flat surface, and only then perform all the necessary manipulations. If you notice that the canvas is larger than the window, then the excess is simply cut off with a clerical knife or scissors. The structure is then assembled intoreverse order, similar to the one in which it was disassembled. To prevent the blinds from slanting during operation, the shaft is rewound on a short tape, after which the box is fixed on the sash with double-sided tape.
Fixing the structure to PVC products
This aspect should be given special attention. Perhaps one of the most common is the question of how to assemble roller blinds on plastic windows. And this is not surprising, because they not only have excellent performance, but also provide excellent sound and heat insulation. There are several basic installation methods. The most common is the one that involves mounting not on the window itself, but on the opening. However, it is more time consuming, because you have to work a little. All work is carried out in the following order:
- Using a puncher, holes are drilled in the wall above the window.
- Next, profiles are installed.
- At the final stage, the main structure is being installed.
It is worth noting that many people, for various reasons, do not want to make extra holes in their walls, so they are thinking about how to hang roller blinds on plastic windows without drilling. In this case, the suspension of the window sun protection system must be carried out not in the opening, but directly on the sash. As a rule, special construction glue or double-sided tape is used for this. These consumables can be purchased at anyspecialized store, so there will be no special problems with the search. But when choosing, it is not recommended to pay attention to cheap products, since they are of low quality, so they will not last long. The best are specialized materials designed directly for the installation of roller blinds.
As for the installation method, it is of no fundamental importance. The suspension can be carried out both on the window sash and on the wall. It all depends on your individual preferences and design decisions that you want to bring to life.
General tips and tricks
Above, it was described in detail how to assemble roller blinds. However, when buying them, many people do not think about their practicality. As they are used, they gradually get dirty and wear out, as a result of which they lose their attractive appearance. To avoid this, experts advise fixing the lower rail on the frame using special magnetic holders. With their help, you will be able to freely open windows without staining the canvas, so that it will remain clean for a long period of time.
What tools do you need?
Above was a detailed instruction for assembling roller blinds. However, in order to do all the work qualitatively, you must have a certain tool at your disposal. You simply cannot do without the following inventory:
- roulette;
- building level;
- electric drill withthin drill;
- pencil;
- fixing elements, if they are not included in the factory delivery;
- double sided tape.
This is a basic set of tools that you simply cannot do without. The exact list depends on which installation technology you have chosen, as well as on the specific roller blind model. In order not to find yourself in an unpleasant situation, it is recommended that you first study the instructions and familiarize yourself with its design features.
Conclusion
This article discussed the main ways to install roller blinds. Each of the described technologies has certain advantages and disadvantages, therefore, before choosing any of them, you need to carefully weigh everything. The main criterion that is of key importance is the design decision that you want to implement. The main thing is that the window design not only gives the interior of the room a finished look, but is also practical to use, because if you cannot open the window to ventilate the room on a hot summer day, then the curtains will not be of much use. And if you doubt that you can handle everything on your own, then it is better to seek help from specialists who will correctly measure and perform installation work.
