Modern book lovers often have a problem with the placement of a home library. As usual, there are a lot of books, but not enough space. Accordingly, such a problem definitely needs to be addressed. And that solution could be DIY bookcases.
This option has several advantages at once. Firstly, these bookcases for the home will be completely free. The second point is that when creating them, you can use improvised material, such as old boxes, pipes, ropes, and so on. But at the same time, it is worth remembering that you will have to spend a certain amount of time on such shelves for books, which is not always enough anyway.
The moment of improvisation is also very important. That is, if you create bookcases with your own hands, then it becomes possible to show your creativity to the fullest and create not just shelves for books, but a real decor element that will profitably enrich the interior of the room.
As for the placement, completely different options are possible here. It can be either a wall and a wall, or a corner. The second option is more interesting becauseplan that it allows you to save some space, and in the conditions of small-sized housing, this fact looks quite attractive. But still, in most cases, in order to place bookshelves, racks, choose a free section of the wall. The fact is that there such shelves look a little more harmonious.
As mentioned above, in order to create bookcases, you can use the material at hand. Suitable, for example, the same disassembled box or sawn pallet. But it is worth knowing that for a start this material should be put in order. First of all, it must be cleaned, and after that it is desirable to varnish it (although it is better to varnish the finished product).
Now about the specific design of the book shelf. Naturally, there are several options here. To begin with, I would like to note the rack, which can be made from a simple rope and a few boards. The main thing at the same time is that the rope, as well as the boards, is still strong enough. Otherwise, everything is simple - we just need to create a book shelf design on the basis of a hammock. That is, the boards must be interconnected by means of a rope. It is both elegant and practical.
Again, there is another interesting option. To do this, you will need two identical ladders and boards of different lengths. Stepladders are placed against the wall, and boards are attached to them. And it is again practical and elegant. However, it is highly desirable not tospoil the whole picture with a sloppy appearance. Therefore, the ladders along with the boards must first be varnished. In principle, you can use ordinary paint. In general, whoever likes what.
And finally, it is worth pointing out one more important point. It is highly desirable that bookcases are manufactured in accordance with certain standards. Firstly, the length of the boards used as a base should not exceed 80 cm, and their width should be approximately 20 cm. After all, then they will not sag once again from the weight of the books, which means that their service life will be significantly increased.
