Everyone knows that it is almost impossible to make repairs and leave a perfectly clean room without any pollution after it. It often happens that after work, traces remain on the floor in the form of stains of the materials used, such as paint, primer or varnish. And there is the problem of cleaning the flooring to bring the room to its original appearance.
Therefore, the question is: “How to wash the primer from linoleum?” worries many owners. They just need to know about ways and means to help solve the problem.
Features
A feature of this type of building material is that after drying, the primer is almost impossible to wash with ordinary water without the use of cleaning products.
Because of this, the easiest and fastest way is to wipe it dry, immediately after hitting the floor. To do this, you need a wet rag or sponge, with which you need to wipe the drops of material from the linoleum without residue.
Ways to washprimer
If the place of contamination was not noticed immediately and the primer hardened, you can not do without the use of various detergents or improvised items.
There are a number of effective ways to wash the primer from linoleum:
- cleansing by mechanical action (using improvised items);
- with the use of detergents;
- cleansing using folk remedies.
Mechanical impact methods
When choosing this method and answering the question: “How to wash the primer from linoleum?”, It is necessary to observe maximum accuracy, calculate the force. Otherwise, the risk of causing various kinds of damage to the flooring increases.
Before applying direct mechanical action, it is necessary to soak the primer spot. To do this, use warm water (not boiling water) or some kind of solvent, a small amount of which is poured onto the stain and allowed to soak for some time. Depending on the size of the spot, the time period can vary from half an hour to two hours.
After this time, gently scrub the stain with a fine abrasive sponge. Then remove the remaining primer by washing the floor with plain warm water and a rag. If necessary, it is worth doing the procedure several times, taking into account the condition of the coating, so as not to aggravate the situation and cause damage.
In addition, in addition to the abrasive sponge, you can use a spatula, blade or knife. In this case, too, the stain is soaked with water or solvent, and thenscraped off carefully. However, there is one nuance that should not be overlooked. When using a knife or blade, scrape the stain at an angle of no more than 45˚ to avoid cutting through the linoleum.
You can also use a steam cleaner or a steam mop. The effect of steam on an already soaked stain contributes to its lagging behind the surface of the linoleum. And because the steam mop is very manoeuvrable, compact and easy to use, it makes cleaning extremely easy.
Cleansing with detergents
When choosing this method of cleaning linoleum from a primer, it is necessary to use products without alkali or soda, as these substances adversely affect the structure and appearance of the floor covering.
In addition, using any detergent, even which does not include soda and alkali, you first need to test it on a small inconspicuous area of linoleum. This must be done in order to avoid unwanted damage to the appearance of the coating.
One of the most effective and versatile remedies for the question: "How to wash the deep penetration primer from linoleum?" is solvent 646. In order to clean the surface of the remnants of such material, you need to moisten a cotton pad or a small piece of cloth with a solvent and wipe the contaminated area. If necessary, you can repeat the procedure several times until completely cleansed.
When asked: “How to wash the primer from linoleum?” an effective remedy is the solvent "White spirit". Hisshould be used in the same way as preparation 646. In addition, when using these products, you need to protect the skin of the hands with rubber gloves, and thoroughly ventilate the area where cleaning is carried out.
After completely cleaning the entire contaminated surface of linoleum, it is necessary to wash the floor with plain warm water to remove chemical residues that are toxic.
Cleansing folk remedies
In addition to mechanical action and chemicals, you can try to wash the primer from linoleum using folk remedies. This method is one of the most accessible and cheapest, but is not inferior in efficiency to the previous two. In addition, such products are the safest for both humans and the surface to be cleaned.
For example, if the scale of pollution is not very large, you can use nail polish remover, which is in the arsenal of any woman. Saturate a cotton pad or clean cloth with a small amount of it and wipe the stain, and then clean the floor.
A more effective method is cleansing using an aqueous solution of acetone, which is diluted in a ratio of 1: 2 (1 part acetone, 2 parts water). Then a clean rag with a hard pile or a sponge is wetted in it, and the stain is wiped off with it. After cleaning all dirt, it is also necessary to completely wash the floor with clean warm water to remove any remaining mortar and primer.
One morea folk remedy that contributes to the effective cleaning of linoleum from a primer is a solution of water with milk. It must be applied in a 1: 1 ratio, wash the floor with it, and especially the places of pollution. After this solution has dried, you can wipe the coating with a woolen cloth. This will give the linoleum a glossy sheen and a new look.
Conclusion
Thus, the primer is certainly one of the complex, time-consuming and unpleasant building materials that can bring a lot of trouble when cleaning linoleum. But by applying one of the described tips, how to wash the primer from linoleum and strictly following the sequence of actions, it will not be difficult to deal with this pollution.
