With an abundance of various adhesives on store shelves, the problem of choice often arises. Different materials require the use of different means according to their characteristics. In each case, it is necessary to carefully select the adhesive. There are no universal recipes. Therefore, to the question "How to glue glass to glass?" it is impossible to give an unambiguous and short answer.
New and efficient
Let's start with a less popular but very effective method. This is the so-called ultraviolet gluing. It was with the advent of this technology that it became possible to create a wide variety of types of glass furniture: tables, shelves, partitions. The method is so reliable that it eliminates any doubts about the strength of the resulting structures.
Now a little about the gluing method itself. It is based on the polymerization of the adhesive composition under direct exposure to ultraviolet radiation.
If you decide whatglue glass to glass so that the joints are as secure as possible, then you should consider using UV glue. It has the unique ability to fill even the most microscopic cracks, which, in fact, guarantees the extraordinary strength of the joint. In addition to such a valuable quality: the composition is absolutely transparent. That is, there will be no streaks or blackouts at the place of gluing. And the polymerization time for this product is only a few minutes.
Of course, such a progressive method will not be cheap. And if you can’t afford such a method, then you should stop at another option.
Silicon adhesive for glass
Using this glue won't cost you a pretty penny. And it gives a good degree of strength. Therefore, it is quite suitable for interior work. In addition, silicone compounds are resistant to various climatic factors, therefore, they are not scary to use in aggressive environments. For example, you can work with them in the bathroom, in the kitchen or on the street.
One of the distinguishing qualities of the silicone composition is its elasticity, which remains even after polymerization is completed
But there are some disadvantages that make silicone not as effective as UV glue. Before gluing glass to glass with a silicone product, it must be taken into account that this composition is not completely transparent. The contour of the glue spot will clearly appear on the details. Therefore, when working with this tool, you needspread the adhesive over the entire surface. Let the remnants go beyond the joints. After drying, they are not difficult to remove with a knife or scalpel.
Also, the silicone method is not suitable for gluing mirrors, as the adhesive composition can gradually corrode the back coating, and stains will appear on the front surface.
When working with glue, allow time for polymerization. It is about 24 hours.
Sealing
Sometimes it is required not only to glue two surfaces together, but also to ensure the impermeability of the joints. In such cases, glue-sealant for glass is used. Whether it's aquariums, double-glazed windows or car glass, choose compounds with high bond strength and moisture resistance.
The most stringent requirements apply to the compositions used in the car service. They are often subjected to crash tests to determine their level of reliability.
A little about beauty
Let's now digress from everyday mundane things and talk about beauty. Now many people are fond of decorative art. It is a pleasure to hold in your hands a unique object created by you, for example, original candlesticks decorated with glass beads or glasses with shimmering rhinestones.
But the question arises: "How to glue the beads to the glass?" Need a transparent compound that would not leave marks.
For decorative purposes, use glue based on organic silicon. After the final solidificationpractically not noticeable. At the same time, it is characterized by moisture resistance and heat resistance.
The composition is easily distributed over the surface with a brush. After applying the layer, you can begin to lay out the pattern from the beads. The adhesive hardens fairly quickly. And no significant effort is needed to press the surfaces to be glued.
To work with individual elements (rhinestones, large glass beads), liquid nails can be recommended. But they do not have perfect transparency. So try not to "follow".
Rules of competentgluing
And now a little about how to correctly fasten surfaces. The strength of the final connection depends on compliance with the minimum technological requirements.
Before sticking glass to glass, you need to ensure that the work surfaces are thoroughly degreased. Go over the seams with a cotton pad soaked in acetone.
Adhesive composition is usually applied to both parts to be fastened. Sometimes the instructions recommend not immediately pressing them together, but letting the product dry a little.
Clamps or rubber bands are used to ensure a snug fit of the glued surfaces.
