To reduce water costs, most people install a meter. Because you need to pay on the meter much less than on the established state average prices. Due to the installation of a water meter, it is necessary to pay only for the consumed liquid. According to reviews, the Betar water meter is considered a particularly high-quality water meter at the present time.
Manufacturing company
Betar is one of the largest manufacturers of water and gas meters in Russia. In addition, the company manufactures component parts for plumbing devices. It should be noted that the manufacturer produces devices only under the name "Betar" and has absolutely nothing to do with the creation and manufacture of other commercial brands.
Currently, Betar manufactures thirty-seven branded products. This is:
- Meters for hot and cold water: 15 and 20 mm in diameter, with magnetic protection and remote write-off of accounting information.
- Industrial water meters SVM: 25, 32 and 40 mm in diameter.
Assignment of counters
Water meters are needed to account for the amount of hot and cold water running through pipes with a temperature of +5° to +40° for cold water meters (SHV) and from +5° to +90° for water meters that take into account hot water (SGV), with a head of not more than 1.0 MPa or 10 kgf/cm2.
According to reviews, the Betar water meter lacked a check valve. The requirements of the buyers were satisfied - a water shut-off inversion hydraulic valve was installed in the water meter, which prevents the liquid from flowing in the opposite direction.
Metering devices are recorded in the State Register of Measuring Instruments of the Russian Federation under No. 16078-05. Raw materials and components used in the manufacture of water meters are approved for use by the Ministry of He alth of the Russian Federation.
Types of counters
Betar water meters are specialized for domestic and industrial applications. For home use, the company produces the following metering devices.
Anti-magnetic type:
- SHV-15, SGV-15 and similar;
- SHV-20, SGV-20 and similar designs.
Remote models:
- SHV-15D and SGV-15D;
- SHV-20D and SGV-20D.
With radio channel:
SHV-20D
Home water meters are needed to account for the consumption of drinking water +5° to +40° and hot water up to +90° at a pressure of no more than 1.0 MPa or 10 kgf/cm2. Buyers leave feedback on the hot water meter"Betar" SGV-15 as about fully meeting the requirements of domestic and foreign GOSTs. Liquid consumption measuring devices with magnetic protection are not affected by magnets with an influencing field up to 140 kA/m.
Devices of the SGV-20D type are used for automatic consumption measurement systems. According to reviews, the Betar SHV-20D water meter with a radio channel is installed in pipeline wells or in the basements of high-rise buildings. Such a device facilitates the collection of data on the amount of water consumed, without requiring a descent into the basement or well.
The company "Betar", whose water meters are regarded as the best and most solid in the Russian Federation, also manufactures industrial devices for measuring consumption. The components used in the manufacture of devices are approved for use by the Ministry of He alth of the Russian Federation.
Specifications
Measuring devices measure water consumption with a temperature from plus 5 degrees to plus 90 under pressure not higher than 1.0 MPa. They are installed on water pipes with a volume of 15 mm. Designed for a passing amount of water of 1.5 m3/h. Sold as a set with two union nuts, two gaskets, two threaded fittings and instructions for use. When assembled, the meter has a length of 172 mm. Water meters can be equipped with an inversion hydraulic valve. In other respects, these devices are exactly the same as all water meters of this type and category, both in terms of functions and technical compliance.
Universal water meter "Betar" SGV-15М3
The universal hot water meter "Betar" is made of heat-resistant components, therefore it is used to account for the consumption of both hot and cold water. Protection against magnets occurs due to the original separation of the domains and the field of the magnets of the measuring apparatus itself. It is possible to install water meters in horizontal, vertical and inclined position of the scale on vertical pipes.
Water meter SHV-15 "Betar"
The "Betar" water meter takes into account cold water at temperatures from +5 degrees to +40 with a pressure of up to 1.0 MPa or 10 kgf / cm2. Components are made from materials approved by the Ministry of He alth of the Russian Federation. Mounted on pipes with a diameter of 15 mm. The length of the device is 172 mm in assembled form, the weight of the counter without accessories is half a kilogram. The device is under warranty for six years, the interval between checks is also six years.
Water meter "Betar" SVM-32
Cold and hot water meter "Betar" multi-jet vane SVM-32 can be purchased with primary verification. The device measures the amount of consumed hot and cold liquid with a temperature of + 5 ° … + 90 ° with a pressure of not more than 10 atm. During the operation of the meter, the rotation of the impeller during the movement of water turns into a metering value on the meter of the device. The SVM-32 water meter does not have a radio channel, therefore they check the meter for hot water once every four years and for cold water once every six years. Installed on pipes with a diameter of 32 mm. ATwhen assembled, the device reaches 260 mm in length, with fittings of 380 mm. Dimensions of the device 260x115x120 mm, weight 2.8 kilograms.
Antimagnetic protection
In the structure of the water meter there is a magnetic fluid coupling to transfer rotation from the impeller to the data meter. In fact, this is a magnet pushing another magnet turned to it with an opposite pole. The pushed element is connected to the mechanism of counting the watch type. The watch device has a set of gear wheels with numbers painted on them. When the liquid moves, the impeller rotates, and the numbers on the instrument panel change.
To protect the water meter from magnetic influence from the external environment, in order to avoid distortion of water consumption data, a device protection system has been made. It protects the clutch magnet from efforts from the outside to stop the meter by the action of a magnet on it.
For the most effective protection of the counter from attempts to stop, an anti-magnetic seal has been developed. When the magnet approaches the water meter, the seal is destroyed. Such a sticker is simply glued to a case made of different materials: plastic, polished wooden board, glass, iron, paper and painted surfaces. It is easy to apply but cannot actually be removed without destroying the filling.
Customer Reviews
Buyers are satisfied with water meters, according to reviews, the Betar cold water meter is used to control water costs, SVK 15−1, 5 is used tohot and for cold. The device withstands pressure up to 1.6 MPa and temperature +5 … + 90 degrees, the amount of water passing per day is 37 cubic meters. We can say about the counter that it saves money about three times a month.
This indispensable device gives excellent results. It is inexpensive, simple to install, comfortable to use. In the package, along with the counter, there is absolutely all the equipment, so you can install or replace it yourself without calling the master.
The metering device works stably even when exposed to an external magnet, so you can't stop it on purpose. The principle of operation is associated with the rotation of the impeller while advancing the flow of water. The amount of liquid consumed is calculated in cubic meters. Viewing credentials on such a device is very handy. In reviews of Betar water meters, users recommend everyone to purchase and install them.
