In the process of choosing a sink, many people wonder what the bottom valves are. People are interested in what kinds of parts exist. The purpose of the bottom valves for the sink is to close the drain hole when you need to draw water. Mechanisms prevent draining. To do this, press a special lever or a drain plug.
What types are there?
There are several types of bottom valves for the sink:
- Mechanism, which is sold complete with mixer. Most often it is lever.
- Foot valve, which can be completed with a mixer or sold separately from it. It belongs to the Push Open system.
Distinctive features of valve with mixer
Most often, bottom valves for the sink are installed, which are sold complete with a mixer. Usually stores make promotions and when buying a mixer they give a valve ingift.
This part is interconnected with the faucet. A special lever is installed on it. It is usually located near the base of the faucet. It is needed in order to open and close the valve.
Many manufacturers install the lever directly behind the faucet. Some companies make models that have it on the side. Depending on the position of the lever, the stopper in the sink will drain or retain water.
Features of mechanisms with the Push and Open system
On the market you can see the bottom valves for the sink called Push and Open. They have a good reputation in the market due to their fast installation. This type of valve is easier to install than those that come with mixers. Even a novice can handle the installation of a part of such a plan.
The system has practically no disadvantages. The only drawback, if you can call it that, is that the installer will have to get his hands wet. Bottom valves from the Push and Open series with articles:are in great demand
- 50100000;
- 50105000.
What are the colors?
Sink bottom valves come in a variety of colors. Such models have a quality guarantee. Many people are afraid to take colored valves, because they think that the coating will be erased during operation. The warranty document says that the part will not lose its appearance during use. There are the following types of colored bottom valves:
- Bronze. It is often taken for standardsinks Part number 304LOB is in great demand.
- Gold. They are used less often, as they must be combined with the color scheme of the sink. The part number for this part is 304LGO.
- Many opt for chrome valves. They match the color of any sink. Most often, people buy a model with the article 304LCR.
When people get a siphon with a waste valve for a sink, they are often installed on sinks with a Push and Open drain system. Typically, the installation process of the kit does not take more than ten minutes.
When installing the valve, you need to remember that it is the connecting part between the sink and the siphon. The connection for such parts is considered universal. It has a standard thread pitch. Therefore, the siphon will definitely fit the valve, regardless of whether they were bought as a set or not.
Distinctive features of Grohe brand products
Plumbers often recommend installing a Grohe sink drain valve. It consists of a removable plug and has a chrome-plated surface. The valve has a six month warranty. It is of good quality and reliability.
Reviews note that the chrome coating does not wear out over time. Its simple to install. In addition, the item will last more than one year. The product is made in Italy. The Grohe bottom valve is more expensive than domestic counterparts. Usually its price is about 1400 rubles, while domestic ones can be purchased for less than 1thousand.
