Lighting technologies are being improved in different directions, allowing the production of more and more ergonomic, bright and functional devices. One of the most attractive solutions in terms of the combination of characteristics at the moment is the LED lamp. It differs from classic lighting fixtures in terms of radiation parameters and more advanced controls. But its form factor also stands out, thanks to which the structure can be organically integrated into the ceiling. A metal frame acts as a carrier base, and the clamping elements of the case provide reliable fastening. There are special LED lamps for stretch ceilings on the market, but this narrow segment also offers a considerable selection of models for various tasks.
Key features of LED fixtures
LED lamps have many advantages, but there is a significant drawback due to which they are rarely used to illuminate workplaces. This is due to unnatural radiation that tires the eyes. Therefore, it is important to consider the temperature of the light. For home usethe natural white spectrum of 3700–4200 K with moderate brightness will be optimal.
When calculating the power of the device, use the following rule: if a conventional incandescent lamp used to work in the room, then its potential should be divided by 8 - this will be the performance of one LED element. As for voltage, 220 V models are used for full coverage of light fluxes, although if a group installation of many point devices is planned, then this figure can be 110 V. The design of luminaires for LED lamps for stretch ceilings is very diverse - there are pear-shaped, spherical, candle and other body shapes. As a rule, miniature devices are selected for stretch fabrics, which involve complete masking of the structure.
Varieties
Due to the characteristics of the installation site, only models of a certain design should be selected for such tasks. It has already become a classic solution in the form of a single 220 V LED lamp. It is formed by three components - a housing, diodes and a voltage surge protection unit. This is a powerful device in terms of light output, which can be enough to service a small room. There are also miniature point devices that include several LED emitters in the design. They are good for their compactness, minimal impact on the placement surface and high energy efficiency. If you need LED lamps for stretch ceilings inpremises of a large area, it would be advisable to use spots. These are massive case devices, in the niche of which several diode elements are also placed. The advantages of this solution include the possibility of complete masking (the body literally merges with the stretch fabric) and high performance in terms of light output.
What else to consider when choosing?
In domestic conditions, the risks of damage to the lamp due to third-party influences are low, but depending on the purpose of the target room, you still need to pay attention to the protective properties. In a bedroom, study or living room, for example, you can use lamps with the usual IP40 insulation class. If we are talking about a kitchen or a corridor where there are high risks of dusting, then it is better to purchase devices with a protection index of at least IP50. In rooms with a high humidity coefficient, special LED lamps for stretch ceilings are installed. What models to prefer in this case? The main condition is a high-quality moisture-repellent coating, so it is optimal to choose lamps with an IP56 protection class. It is also worth abandoning metal cases. It is better to give preference to plastic, ceramic or glass.
Best LED Lamp Manufacturers
Leading developers of LED devices include Philips, Osram and British firm Foton Lighting. The first two manufacturers have made a significant contribution to the technological development of the segment, today offering devices that are optimal in terms of performance. ATIn particular, Philips relies on environmental safety and reliability, and Osram products are famous for their original construction and design performance. There are enterprises among domestic manufacturers that produce high-quality LED lamps for stretch ceilings. Which ones are better? Experts recommend choosing from the Gauss, Optogan and ASD ranges. As a rule, the lamps of these companies are based on elements of the same Philips brand, but in this case the cost will be lower - about 500-700 rubles, while the original models cost 1000-1500 rubles.
Lamp Placement Configurations
When planning the scheme for installing fixtures, two parameters should be taken into account - the installation depth and location points. With regard to the first requirement, it is possible to perform indoor or outdoor placement. Deepening the structure under the canvas niche will make the body almost invisible. Only the lens and the working part of the lamp will be on the surface. When installed outdoors, the structure protrudes downwards, so higher aesthetic requirements are imposed on this scheme. In this case, it is recommended to provide for the presence of decorative inserts on the body. Thanks to crystal or metallized elements, a stretch ceiling with LED lamps will give reflections, which will make the design of the room more interesting. Placement points should be calculated according to the general rule that the distance between the elements should be at least 20 cm. It is desirable to maintain a balancecoverage of the area with light fluxes.
Installation technique
By the time the installation begins, the appropriate wiring must be prepared in the subceiling niche. The electrical filling of the lamp body is connected to it. Installation is carried out using clamping elements - the design of the device is inserted into the cartridge and snaps into place. Some models in the interval between the carrier base and the base of the device provide for the presence of thermal protection rings. They should not be forgotten during the installation process. Counter question: how to replace the LED lamp in the stretch ceiling? This operation is easy when it comes to single modifications. It is enough to open the latches on the springs provided for in the design and the device will come out by itself. There are models with threaded bases - accordingly, to dismantle them, you only need to unscrew the case.
Service details
LEDs are low maintenance, they do not need additional technical support, but sometimes they need preventive and repair operations. You should periodically wipe the front surfaces of the devices, check the quality of the insulation and the operation of protective devices - for example, the same fuses.
A special approach is required when repairing failed emitters. How to change the LED lamp in the stretch ceiling if the diode is blown? Dismantling is carried out according to the scheme discussed above, and the device itself is carefully checked for faulty elements. They can be calculated by the presence of blackdots on the yellow surface. This component is replaced by unsoldering and installing a new LED with the same size.
Reviews on LED ceiling lights
For the most part, users of such structures are satisfied with the operation process. In addition to the obvious design advantages, energy efficiency and reliability of the devices are noted. If we talk about the minuses, then LED lamps for stretch ceilings are expensive. Even the minimum price of 500 rubles. higher than the cost of traditional lamps. And this applies only to the budget class.
Refer to the disadvantages and the complexity of the installation. The full range of LED lighting control options is available only if special drivers and controllers are integrated into the circuit, and this greatly complicates installation activities.
Conclusion
In the lines of lighting manufacturers, new versions of devices regularly appear, allowing you to perform non-standard design configurations. Even simple LED lamps for stretch ceilings have greatly expanded the possibilities for arranging radiation points. In addition, fundamentally different devices are now appearing. These include tapes that are located on the inside of the canvas and provide subdued lighting. But in terms of volumes of light supply, miniature spot and strip products are still not able to compete with traditional chandeliers equipped with lamps.incandescent.
