Every home craftsman will benefit from the homemade products presented in the article. This will simplify not only the performance of some work, but also life. It is also important to remember what kind of tape materials can be useful.
Adhesive tape, sneakers and drawers
If you are engaged in assembling or disassembling any mechanism from small parts, it will be convenient to stick double-sided adhesive tape on the table to put parts on its surface. They won't get lost when stuck. If you need to climb a ladder without scratching the surface of the wall, you should tie shoes with clean soles to the ends of the climber before installing the climber.
Useful homemade products and do-it-yourself devices can be done even if you havefull staircase to the second floor. Under each of its steps, you can make drawers where you put household items. Part of the steps can be made folding, strengthening them on hinges. This way you can use their inner space as boxes.
Plastic windows, screwdriver and metal corner
It is difficult today to find an apartment or a house where plastic windows would not be installed. If your home has such double-glazed windows, they have seals. If you do not want them to crumble, you can extend their life. To do this, spray silicone grease should be applied to the seals once a year.
Considering little tricks for a home master, you can note the following for yourself. If you don't have a screwdriver handy for small screws, you can quickly make one by sharpening the tip of an old can key. If you want to update the interior and hang a heavy picture, then it will need to be supported from below. This can be done by attaching a metal corner to the wall.
Mirrors, wall holes and small screws
If you mount a mirror over the top shelf of your wardrobe, you won't have to climb up to the dais to see what's stored there.
When you have to drill holes in the walls where there is hidden wiring, there is a risk of the drill getting into communications. You can find the wiring in the wall using a tape recorder. To do this, an electrodynamic microphone is connected to it. The instrument shouldenable recording with maximum gain. When the microphone is held along the wall, a low hum will be heard from the speakers of the tape recorder at the places where the wiring is laid. When the device moves away from the wiring, the hum will weaken. It is safest to drill where the noise is completely gone.
Little tricks for a home master can be useful and unusual. For example, in order to hammer a nail, it should be inserted between the teeth of the comb. This will save your fingers. A special holder for screws and nails can also be made from a regular wooden clothespin.
Calipers, holes and shelves of complex configuration
A plastic or metal safety bracket must be fixed over the stop screw of the caliper. In the meter's engine, for this, it is necessary to drill two holes, and then cut the thread. After these manipulations, the screw cannot be lost.
In order to get a hole of the desired depth, paint marks can be applied to the drill. Sometimes an insulating tape is used for this purpose, which is glued in several layers. But during operation, such marks can go astray. It is most reliable to put washers of a suitable diameter on the drill. This template is convenient in that it can be taken out and adjusted by adding or subtracting washers.
Little tricks for the home master can make his life easier. For example, if you want to make a shelf of complex configuration and install it in a built-in wardrobe,To do this, you can prepare a template from strips of cardboard. It is much easier to adjust the product to size from it.
Small nails, float and outlet valve
Using a wooden ruler to which you need to stick a small magnet, you can make a handy tool for driving small nails.
If necessary, you can replace the failed float of the drain tank using a syringe of the required volume. If your toilet cistern outlet valve is leaking, you can fix the leak with a weight. The rubber bulb, under the influence of additional weight, will enter the saddle more densely, while the flow will stop.
Removing blockages, cutting tapes and flattening nails
Little tricks for a home master sometimes allow you to avoid unnecessary expenses. For example, if there is a blockage in the sewer, then the drain pipe in the bathroom or sink can be vigorously pumped using a car or bicycle pump, to which you need to connect a flexible rubber tube.
Taking 2 blades, which should be fixed on a wooden block, you can cut tapes of a certain width. The material used can be polyethylene, paper or leather.
When you need to drive nails into wood, you can simplify this process by flattening them. Joiners often do this with a point. To do this, it is hit with a hammer. If the nail is flattened, it will enter the wood and be held there due to its springiness.broken fibers. When a nail is sharp, it can split wood.
Heat cutter, paint and wall cleaning
Do-it-yourself homemade tools will help in life if you often do something in your home. For example, you can make a thermal cutter, which will be based on a soldering iron. This fixture is designed for a powerful electric soldering iron. It should be cut from iron or steel 1.5mm plate. Fastening should be carried out to the tip of the soldering iron with clamps. Working edges should be sharpened. Now we can assume that the soldering iron is adapted for cutting foam and various plastic materials.
Using tips for home masters, you can avoid a lot of trouble. For example, if the paint remains in an uncorked can, after a certain time it forms a rather dense film due to exposure to air. In order to eliminate such inconvenience, after work, the lid should be tightly closed by tapping on it with a hammer. The jar should be stored upside down. At the same time, air will be at the bottom, and although a film is formed there, it will not interfere with work next time.
Considering useful homemade construction products for a home craftsman, you can highlight for yourself a life hack on how to clean the ceiling and walls from the water-based layer. For this, old newspapers are glued to the surface. Once the glue dries, the newspapers can be peeled off along with the layer of paint.
How to saw off the edge of plywood. Drilling holes intiles. How to replace the vise
In order for the sawn edge of the plywood to be even, it is cut with a sharp knife along the cutting line. At the same time, burrs are not formed on the cut. There is another way. It consists in wetting the plywood surface along the cutting line with hot water. The liquid will help cut the asbestos-cement sheet, because it softens the material, which means it will be easier to cut.
If you are interested in useful crafts and gadgets, you can make many of them with your own hands. For example, so that the holes in the tile when drilling it turn out to be even, and the drill does not slip off the selected point, a cross from paper self-adhesive tape should be glued in place. Drilling should be carried out through the center and rather slowly, while there should be no pressure. If you want to make a DIY tool for your home workshop, you can use clamps that can replace a small vise.
Helpful homemade construction
If you pull a string over a can of paint, you can attach a brush to it during a break or remove excess paint from your work surface. The edges of the jar will remain clean and the lid will no longer stick to them.
Useful materials
Materials for a home master can be very useful. This should include masking tape. If you stick it to your hand, you do not have to constantly run to the table when measuring. It will be possible to record the result on a tape, and then transfer it all to paper. So you save time. This is especially convenient if you have to work onheight.
Cellophane can also help you out. Often PVA glue dries on the thread of the bottle. It is not possible to open the cover. To prevent this from happening again, you need to take a plastic bag and cut a small piece out of it. Now the thread will remain safe and the bottle can be easily opened.
