Aventos are Blum lifts that provide a high level of convenience when using kitchen top cabinets. A special hardware device allows you to effortlessly open even the heaviest facades.
These lifts are also distinguished by the fact that the freedom of movement and the useful space of the kitchen are not constrained by unnecessary structural elements and do not clutter up the space above the head of the hostess. What are the positive qualities of the Blum lifting mechanism, as well as how to easily, quickly and correctly adjust it with your own hands, we will consider further.
Advantages of Lifting Kitchen Cabinets
The Bloom mechanisms have the following positive qualities:
- Ease of use. These devices are designed not to restrict the freedom of movement of a person working in the kitchen in any way. In the process of cooking, the facade can be left open and not worry that it will fall on the head of the hosts, because Blum Aventos providesa secure fit.
- Easy to open and quiet during the process. Easy opening plus silent closing of the facade doors is achieved by the functioning of the integrated BLUMOTION damping system.
- Multifunctionality. Thanks to the SERVO-DRIVE and TIP-ON motion technology, handleless opening of fronts becomes comfortable.
- Ability to stop the shelf door in any position. The power mechanism working smoothly and adjusted to the weight of the facade allows such manipulation regardless of the position of the element.
- Unity of design of lower cabinets and upper cabinets. The presence of horizontal gaps determines the appearance of the furniture and in no case should be cut with vertical "slits". With Blum Aventos lifts, you can choose the right position for the look of both upper and lower cabinets.
Subtleties of adjusting the power mechanism "Aventos HF"
To set the Aventos lift to stop in any position, follow the short instructions:
- Insert the special nozzle into the adjustment slot.
- Turn the element with a screwdriver (set to minimum mode), watching the position of the slider relative to the adjustment scale, thereby loosening or tightening the mechanism. Carry out the action before the opening/closing of the doors will not stop at any position.
- Make sure the slider on both front-supporting mechanisms is in the same position.
How to adjust hinges and fronts?
The Blum lift setup procedure includes 5 main steps:
- Pre-adjustment of two pairs of loops (upper, middle). This will help to install the facades exactly along the body with the same gaps. Since this is only a preset, please tweak it more or less.
- Next, manually adjust the position of the facades so that all the doors are in a strictly parallel position. Please note that the latch on the telescopic arm must be perpendicular to the arm itself.
- After fulfilling the two previous conditions, click the latch and check if the facades are level. If not, use an awl to reset it and re-align the doors.
- Lock the mechanism and check the elements for opening and closing.
- At the final step of the setup, work the top and bottom hinges again, adjusting them until the fronts are in the perfect position.
Now, after reading the simple instructions, you know how to adjust the Blum "Aventos" lifting mechanism to fix the kitchen cabinet fronts.
