Cersanit products have become more and more popular lately. The bathtubs of this manufacturer are made of English Lucite brand acrylic, which is characterized by high strength and unsurpassed whiteness. The described plumbing is a durable and practical solution. This is also due to the fact that the bath has special plates that are necessary for rigidity, as well as a double bottom. Thanks to these characteristics, plumbing does not deform or bend during operation. Special resins are introduced into the bottom, which make the structure as durable as possible. Cersanit products are presented in a large assortment today. Bathtubs are no exception. They can have different sizes and shapes, so that the consumer can choose a design that fits perfectly into the room. The style of the described plumbing fixtures provides for wide sides, and some models have seats and comfortable armrests. Modern Cersanit brand combines comfort and elegance.
Feedback on positive features
If you choose a Cersanit acrylic bath, then, according to users, you will purchase a product that will be distinguished by bold design solutions andcombine comfort and convenience. As practice shows, the surface does not darken over time, acrylic inhibits the development of bacteria. For this reason, consumers consider such bathtubs to be more environmentally friendly than cast iron or steel bathtubs. The Cersanit acrylic bath is light in weight, so users quite often choose it when there is a need to install it in apartments on the high floors of a multi-storey building. It is easy to deliver to the place, as well as to install. The water in the bath will cool slowly, as the design has high heat-saving qualities.
The housewives note that it is very easy to care for the surface, for this it will only be necessary to rinse it with water, and then wipe it with a soft sponge, on which liquid detergent should first be applied. During operation, abrasive substances that can damage the surface should be discarded. If scratches do occur, they will be easy to polish. Due to its characteristics, acrylic allows you to create interesting forms of bathtubs, so the manufacturer offers a large number of different models. Many consumers after purchasing plastic bathtubs believe that acrylic bathtubs will be just as soft and brittle. However, it is not. Acrylic products of the Cersanit brand are supplied with a special frame, which ensures the strength and stability of the structure. These bathtubs are environmentally friendly, you can verify this by requesting a quality certificate from the seller.
According to users, these products are hypoallergenic, which is confirmed by Polishspecialists. After reviewing the range, in the line you can find bathtubs with an antibacterial coating. If you are a consumer interested in the he alth of your loved ones, then you should purchase a model that belongs to the Pure series, it has a special coating enriched with silver ions. This protection has antibacterial and antifungal properties. This addition allowed for long-term and effective antimicrobial protection of the bathroom.
Negative reviews
If you are interested in the Cersanit brand, you should study the baths of this manufacturer in more detail, as they have not only positive, but also negative characteristics. This can be confirmed by customer reviews. From them you can find out that among the minuses is a rather high cost. This is true when compared with the prices of steel and cast iron tubs. In addition, despite the strength of the material, the surface of the tub is easily damaged by a hard object. Consumers face this quite often. However, from their words it becomes clear that you can even eliminate such damage yourself. In some cases, the walls of such baths begin to deform during operation. That is why customers are advised to purchase products with a special frame.
Installing the bathtub
If you choose one of the products of the Cersanit brand, for example, bathtubs, then you can install the plumbing fixture yourself, sinceit has little weight. The design should be turned upside down and laid on a cardboard package, assemble the frame, following the instructions. Next, you need to install it on the bath. The product is installed on the legs near the installation site, and then the master should adjust them in height. If you want to install a decorative panel, then the distance from the lower edge to the floor should be approximately 600 mm. The bath should be installed in the intended place and check how horizontal the sides are relative to the surface. In this case, the building level should be used. Installation of Cersanit acrylic bathtubs, like any other, provides for the installation of a siphon, as well as an overflow. The system is connected to the sewer, after which the tightness of the connections should be checked by filling the bathtub with water. After installing the decorative panel, fill the gaps between the sides and walls with antibacterial silicone sealant.
Expert advice
In order for the bathtub to be firmly fixed in the desired position, you should fix it to the wall. This work can be done using the mounting kit that is included in the kit. It should contain brackets for wall mounting, screws, studs, corner stops, and dowels.
Features of attaching the bath to the wall
Quite often recently, consumers choose Cersanit products. The bathtub, which you can install yourself, must be fixed to the wall. Whereinit should be adjusted in height and horizontally, setting it in its final place and attaching the fastening brackets to the wall surface. This must be done in the places where they are supposed to be installed. After a pencil, you should mark the place where it is supposed to drill holes for the dowels. At the next stage, you need to make holes by fixing the corner stops parallel to the board. This must be done in such a way that the lower edge of the board is on the installed corners.
Work methodology
Cersanit bathtubs, reviews of which you could read above, must be fixed to the wall. To do this, holes must be drilled in the places where the mounting studs will be located. In this case, you should be guided by the marks made earlier. Dowels must be installed in the holes and mounting studs must be screwed on. The bath must be moved to the installation site, the mounting brackets must be put on the studs, and then the nuts must be tightened.
Feedback on features of operation
Cersanit acrylic bathtubs, reviews of which will be useful to read before purchasing a product, usually cause problems during operation. This opinion is shared by many consumers who already use similar products. And if you choose a compact corner model, it will not take up much space even in the smallest bathroom. Those users who spared no expense and purchased this product note that its cost pays off infor several years, while cast-iron and steel bathtubs may require restoration after a short time, which will have to be paid extra.
Conclusion
Before you install the Cersanit bath, you must take care of the availability of all components and tools, otherwise you will have to visit the store more than once, which will prolong the work. It is also worth remembering that such products are more difficult to install than, say, steel ones, since the latter are quite easy to place in the right place by installing them on legs.
