Shops are full of skateboards, but is there one that fits your needs perfectly? There are doubts. That is why many are interested in the question of how to make a skateboard on their own. Often, a skateboard is made not because of a lack of finance, but because of the need to obtain a unique board that is completely suitable for the individual preferences of the owner and his physical characteristics.
Choosing even the highest quality and most expensive board, you cannot completely eliminate the need for adaptation. Why customize your skate when you can create a unique board and customize it for you!
Make a skateboard with your own hands: where to start
Let's figure out how to make a skateboard at home. Having knowledge of design features and responsibility is the first thing you need to have when starting designing. Answer questions about why you need a skateboard, what size it should have, what modification is best for you.
You must clearly formulate answers for yourself, because it is from them that you will build on, formingdesign scheme. It is better to purchase parts in a specialized store, and assemble the skate itself according to the instructions if you purchased a ready-made assembly kit, or use the recommendations for self-assembly given in the article.
Create a skateboard with your own hands
How to make a skate from a set purchased in a store? Very simple. This method is similar to playing with a construction set: you have a complete set of parts and all the necessary tools with which you need to assemble the elements, in the end you will get the desired design. This method of construction is the easiest and fastest, but not always from factory parts, fitted to a certain format, a convenient skate is obtained.
Step by step instructions for assembling a skateboard
To assemble a complete vehicle, follow these steps:
- Attach the skin to the board: it should stick tightly and evenly to the wood flooring. Air bubbles formed under the skin can be removed, but you will have to wait for the workpiece to dry completely.
- Cut and finish the edges of the skin after it dries. Then start preparing the holes for the screw fasteners.
- Poke holes sealed with sandpaper in the factory board with an awl.
- Assemble the wheels by filling the inside of each wheel with factory-supplied parts in this order: Bearing 1, Bushing, Bearing 2.
- At this stage of the assembly, install the washers that are attached on both sidesboards.
- After finishing with the washers, fix the wheels and complete the assembly of the structure.
- Additionally adjust the damping system.
Following the assembly instructions, you will be able to figure out how to make a skate step by step, and create a complete vehicle suitable for learning, riding and mastering new tricks.
Board from scratch, or how to assemble a skate from improvised materials
You can assemble a skateboard no worse than a factory product even from what is at hand. Are you looking for an answer to the question of how to make a skateboard at home with your own hands? We'll find him!
To complete such a task is much more difficult than assembling a vehicle in the form of a skateboard from blanks, but it is quite feasible.
In this version, the assembly scheme discussed above is completely duplicated, the only difference is that you will have to make the parts for the skateboard yourself.
So, how to make a skateboard from scratch. To begin with, you will need a wooden deck, consisting of several layers (at least seven). Before gluing the board, calculate the parameters of the future product, take measurements and cut the workpiece. Then grab the glue.
You can cut a board according to a ready-made template, but it is better to design a unique product according to your drawings.
The issue with the lack of a factory skin is also easily solved. Replace it with thick sandpaper, the principle of gluing of which is similar to working with factory material.
The only thingstill have to buy, these are suspensions and bearings. For assembling a skateboard at home, a set of factory parts 608 is great.
If you have everything you need, you just have to build the board of your dreams, give it a unique design and go to conquer new heights. From this we can conclude: if there is no suitable model for sale, there is nothing left but to make a skateboard with your own hands. It's not hard!
