When you visit a modern furniture store, you will see a large assortment of interior items. Among other market offers, there are solutions for hallways.
These are tables, glass cabinets and cabinets with curved legs. But the area of \u200b\u200bthis room is usually very scarce. Sofa here, as a rule, you will not put. Moreover, you have to rack your brains to hang at least a hanger. You can buy it in the store, but it will be much cheaper to make it yourself.
This approach will not only save your budget, but also open up a lot of opportunities for you. So, you can embody your designer ideas. Some, having discovered a talent in themselves, begin to make pieces of furniture for relatives and friends. And in a better scenario, you can even open your own business. This can be beneficial, because modern materials for making furniture are not soexpensive, and if you are a craftsman yourself, you can also save on labor.
Preparation
A fairly easy task is to plan the board by nailing hooks and brackets to it. This miracle of design can be hung on 2 dowels. However, in a small hallway, a hanger should not only play a functional role, but also be beautiful. A wooden dowel can act as a rod, which is inserted inside the logs during the construction of the house. In place, you can calculate the size of the hanger, given that the width of the hangers, located perpendicular to the wall, should be added to the depth. Next, you should prepare a drawing indicating all the parameters.
Preparation of tools and materials
Before you make a hanger in the hallway with your own hands, you must take care of the availability of materials and tools. The load on the product will be quite large. Clothes will hang on hooks and a bar, and scarves and hats can be placed on top. Therefore, you must pick up a beam of impressive thickness. Among the set of materials it is necessary to highlight:
- beam for bearing part and cross members;
- confirmations;
- wood dowel;
- brackets;
- screws;
- hooks;
- screw;
- paint.
Beams for the supporting part should have the following dimensions: 20 x 30 x 3000 mm. For the crossbars, you will need two beams 20 x 20 x 2000 mm. Confirmants are required in the amount of 18 pieces, they are also called Euroscrews. The screws must be of different lengthsquantity is limited to 10 pieces.
To fix the structure to the wall, you will need 2 brackets. As a material for ennobling the hanger, stain and varnish should be distinguished. If you are faced with the question of how to make a hanger in the hallway with your own hands, you should also take care of the availability of tools, namely:
- drills;
- screwdrivers;
- hacksaws;
- bar with sandpaper;
- screwdriver;
- painting brushes.
Cutting blanks and assembling hangers
You should not buy timber with knots. Under load, the knots will fall out of their nests, and the structure will collapse at the most inopportune moment. You should buy a homogeneous beam, dissolving it into blanks for load-bearing triangles. The hypotenuse of the triangle from the inside will be 397 mm. The leg, which will be parallel to the wall, should be equal to 339 mm. The leg that will be parallel to the floor should be 372 mm.
With the help of a protractor, you should outline the oblique saw cuts. As an alternative solution, attach the hypotenuse along the legs to make the markings with a pencil. On the resulting line you will cut. Before you make a hanger in the hallway with your own hands, you must check the blanks for the triangles. They are compared side by side. They should match as accurately as possible, this will make it easier to work. After sawing the blanks, they are processed with sandpaper until smooth.
Working on triangles
Departing from the ends of the short sidestriangle distance, you should mark the workpiece. A mark is placed in those places where the lag screws will pass. Holes are drilled under them. Next, you can drill inclined sockets, placing them at the bottom of the triangle. Then you need to tilt the tool and drill the workpiece to the end. Do not press the drill while working, so as not to split the material.
To deepen the head of the screw, the hole must be cut with a drill of a larger diameter. The lower corners of the triangle are tightened with screws. The upper back of the workpiece must be strengthened with a bracket. The same should be repeated on the other side.
Installation of rails
If you are faced with the question of how to make a hanger in the hallway with your own hands, then the next step is to install the cross rails. The length of the hanger will be 735 mm. From this value, 60 mm should be subtracted, which is the thickness of the triangle beam. This will give you 675 mm. This value is the length of the rod and crossbars. The most powerful rail should be cut out of a 30 mm beam. Each crossbar and rod should be pressed with a clamp to the table, and then drill holes for confirmations at the ends. You should not be afraid that the drill will go deeper than the length of the euro screw. This will only protect the timber from splitting.
After that, you can make reciprocal holes. The upper cross rails will be located at different heights. For example, the one above the bar should be slightly higher so that it is easier to remove and hang the hanger. Between the sides of the triangle you need to fix 2spacers for confirmation. Hooks are screwed onto one of them.
Final stage
When making a hanger with your own hands, you will need to assemble it together by connecting the parts with euro screws. Products are covered with a coloring matter 2 times and dried. Hooks can be reversed. In order for the distance between them to be the same, the length of the beam should be divided by the number of hooks plus one. The found number is measured starting from the edge of the bar. By flipping the hooks, you will have to hang the hanger on the wall. The process uses a puncher.
Using boards
Using the scheme, you can make a hanger in the hallway with your own hands. However, the drawing can be done independently. If you don’t want to buy an ordinary bar with hooks, then you can diversify the interior with a hanger in the form of a tree.
Wood can be treated with water-based varnish or stain. It is better to choose a color close to the shade of the front door. At the sawmill you can buy unedged boards with a thickness of 25 mm. Marking is applied to them, there will be a trunk on one side, and branches on the other.
Use a jigsaw to cut blanks. Next comes the dusty work. It is necessary to sand the wood, adjusting the thickness of the joints with the branches. A drill with a rubber nozzle and sandpaper is perfect for this purpose.
First, the material is processed with coarse grain paper, then you can move on to medium and fine grain. Then a mahogany stain is applied. It can be applied tomultiple layers. After drying, everything is covered with water-based varnish. It can be applied in 3 layers, between each of them a break of 3 hours is maintained.
If you are thinking about how to make a hanger for the hallway with your own hands, then you might think about what to use as hooks. For this purpose, 200 mm nails are perfect. They are cut to the desired length. Hats and shaft can be sanded for smoothness. The bottom part is threaded to the thickness of the board.
In the branches, you should first make holes where the hooks are screwed. All parts are attached to the wall. If it is concrete, then it is better to use dowels. First, a barrel is substituted through which holes are drilled. Plastic plugs for dowels are inserted there. Once you attach the barrel, you can screw it on. Using the same technology, strengthen the branches. Now you know how to make a wall hanger with your own hands in stages. You can complement this design with a shelf for shoes. The cost of making a hanger will vary from $6.
LDSP hanger
In the building materials store you can buy two boards made of laminated chipboard. This material is also called furniture board. The price for it will be low. You can buy brackets in the hardware department. They can be used for a second board, which will be used to make a shelf for small items.
If you are interested in how to make a clothes hanger with your own hands, the drawings you need to startconsider or prepare. You can find them in the article. You will also need tools, namely:
- drill;
- screwdriver;
- drill set;
- pencil;
- roulette.
You can remove stains and traces of glue from chipboard with a solvent. To do this, use a white rag. The hooks are laid out in a checkerboard pattern, here you will need a pencil and a tape measure, with which you can measure the same distance. Next, you should mark the places for self-tapping screws. Hooks are removed, and holes are drilled in their place. Need to use 2mm drill bit.
Work methodology
Now you can do the shelf. On one side and the other, equal distances should be set aside by attaching brackets and measuring holes for fasteners. Now you can drill holes by installing the brackets.
When making a wall-mounted clothes hanger in the hallway with your own hands, you will need to mount it on the wall. The technique remains the same, but in this case you will use dowels. The drill is selected according to the size of the dowel. A plug is inserted into the hole, then you can attach a hanger to the wall and fix it.
In closing
You can implement one of the above ideas yourself. You can make a wall hanger in the hallway with your own hands, thereby saving usable space in a small room. This design does not take up much space. And if desired, the hanger can even be hung on the door. If desired, such a piece of furniturecan be supplemented with additional functional elements. It can be shelves, cabinets and cabinets. Everything will depend on how much usable space in your hallway.
