In our time, unusual ideas of interior designers are popular. One of these ideas was a wooden bathtub, made by hand. Such a decision will not only add unusual details to the house, but also create a special mood. Guests will be surprised by the presence of such a design. A finished product from famous designers will be expensive, it is much easier to make a bath yourself. You will be able to save a large amount of money. How is a wooden bathtub made by hand? Step by step instructions will be presented in this article.
Preparatory stage
Before you make a wooden bath, you should clearly imagine this design. Plumbing made of wood has its own nuances and differs from standard fixtures for bathrooms. You can make a wooden bathroom with your own hands as in the pictures in magazines, having previously learnedthe device of this device, as well as the parameters of the future design.
The first step is to take measurements from the room and the place where the container will be located. On a sheet of paper, you can make a drawing where the dimensions of the product will be visible. It is necessary to approach the issue of buying wood with special care. Do not chase the most expensive, as well as the cheapest types of wood. It is better to choose the middle option, which has the best value for money. Boards must be cut to the same length. The blanks must have the same thickness. If this work is done correctly, it will be easy to assemble the bottom. Do not forget about the need for a drain hole. You can cut it yourself. It is worth considering in advance the issue of draining and laying pipes.
Design Features
The do-it-yourself wooden bathtub, as in the photo below, is a special container. It is intended for bathing, that is, it has the same tasks as standard acrylic structures.
In wooden baths, you can make a drain hole yourself, as well as screw the legs. There are various models. They differ in additional equipment. The design of a wooden bath may also differ from the usual for all options.
Items such as nozzles can be added to the product. They are needed for hydrotherapy. Some do air massage when they take a bath. Lights designed for chromotherapy are in great demand. Someadd relaxing music. With the remote control, you can switch your favorite songs without leaving the bath.
What determines the capacity setting option?
A do-it-yourself wooden bathtub implies several options for installing the structure. Some containers require legs, others need a pedestal. To install a pedestal, you need a spacious room. Standard bathrooms in apartment buildings are not suitable for this. You need a room where the bath will be located in the center of the room. If the container requires legs, then it can be installed in a standard bathroom. Professionals advise making bath legs from the same material as the structure itself.
What parameters can the product have?
A hand-made wooden bath can be of any shape. It all depends on the preference of the homeowner. Products may have different weights and wall thicknesses.
If the container is made in the shape of a barrel, then the sides and their height will be important. The capacity of this design can also be different. This type of container can accommodate from one to six people.
The depth of the product may be different. Usually, it ranges from 53 centimeters to 70 centimeters. The wall thickness can also be different. Some people prefer to make thin ones, others like rougher and wider bathtubs. Modern designers prefer to create products with thin walls. They adopted this idea from Italian companies,producing unusual plumbing.
For private houses and country cottages, professionals advise making deep bath bowls. They correspond to the rustic style, as well as primitivism. The thick walls of the structure make the owner feel harmonious, they add a sense of unity with nature.
Dimensions of a wooden bathtub
Wooden baths, as in the photo in this article, may differ in their dimensions. They can be from 1.8 to 2 meters long. The width of a wooden bath, made by hand, can be from 70 centimeters to 90 centimeters. Some prefer to create wider designs.
The weight of the wooden sanitary ware can also be different. The minimum value is 60 kilograms, and the maximum design can weigh up to 300 kilograms.
It should be remembered that a wooden structure cannot have a mass of less than 30 kilograms. If the bathtub still weighs less, then most likely it will not support the weight of water.
You can make a wooden bath with your own hands with different volumes. The minimum value is 280 liters. Often there are designs for 500, as well as 700 liters. As a rule, they are intended for bathing 3-4 people at the same time.
Types of bathtubs
In order for a wooden bath to serve for a long time, you need to find out what types and forms it is. The features of each design are important:
- The easiest option to make is a round bathing container. Most often, this type is installedin baths or country houses. The design is easy to construct and does not require additional costs.
- The boat-shaped bathtub has a material structure that looks as natural as possible. It allows you to feel unprecedented ease when taking water procedures. On some models, a wooden frame is installed and a small ladder is attached. It is needed for the convenience of getting inside the container.
Types of materials
To make a wooden bath, you must follow the instructions. It is important to choose the right type of material. There are the following types:
- Solid tree.
- Fragments of wood (large, small).
- Bars.
- Small boards. They are often called staves.
- Veneer is of two types: artificial and natural. This material has a low price.
Design Tips
To make your own wooden bath, you need to be extremely careful. Care should be taken to preserve the natural color of the wood, as well as the structure of the material. Taking the desired shape, the product should not lose the natural properties of the material.
When processing the surface of the structure, water-repellent properties should be added to the wood. You need to be prepared for the fact that wood processing will take a lot of time.
It is necessary to clarify the prices of materials in advance. Timber species differ in cost, some are overpriced per linear meter.
Pricing policy
Teak is one of the most expensive types of woodyellow-orange, as well as solid mahogany. Available species for the average consumer include larch and cedar. This group also includes oak, linden and pine. These rocks are ideal for making a bathroom. They don't tend to absorb water.
What tools and materials are needed for the job?
For successful work on creating a wooden bathing container you will need:
- Sanding machine.
- Woodworking machine.
- Special impregnation.
- Sealant, glue for wood.
- Special varnish for wood.
- Wood of a specific species.
It should be noted that you need to buy materials and mixtures that do not contain toxic substances. They must not lose their properties when in contact with water and withstand temperatures equal to 70 degrees Celsius.
Which is the easiest to construct?
The easiest option to assemble is a barrel-shaped bathtub. To do this, you need to make a frame and fit the rivets. An important point will be the fastening of the metal belt. When making the bottom of the bathtub, the lamellas must be adjusted with particular care.
Each part of the barrel must be perfectly smooth and polished. Most often, this version of the bath is used in baths. For an apartment, it would be better to make a model using bars of various shapes and lengths. To do this, you will need a grinder and a woodworking machine.
At home it is easier to assemble a product from small bars. Better stopyour choice on a simple bathroom model to fit in any bathroom in a high-rise building.
Difficulties may arise when assembling the walls of the bathing container. It is recommended to glue the surface of the bottom with adhesive tape, it will create additional protection for the product.
At the processing stage, do not forget about the primer for wood. It is necessary to improve adhesion to the coating. Finishing of the product should not begin until the bath has passed the leak test. After passing through this stage, the design and final processing of the product is acceptable.
To process the inside of the container, you need to polish it, and then apply several layers of a special polymer coating. Lacquer is applied last.
Conclusion
So, we looked at how to make a bath with our own hands. As you can see, this is quite feasible work. It is enough to have instructions and a basic set of tools.
