Stretch ceilings in the hall are practical, decorative and moisture resistant. If you decide to prefer this type of finish, then you should understand the variety presented by modern stores.
Choosing a ceiling by material
PVC sheets are a thin PVC film that is welded from individual strips. The manufacturing process involves the use of special equipment. For installation, the material is heated to 60 degrees, after which it becomes possible to stretch the film. It is installed on a pre-assembled frame, and after cooling, the structure is smooth and taut.
If you choose a similar material, the surface of the ceiling can be glossy or matte. Stretch ceilings in the hall can also be made of fabric, which is elastic, and in appearance and texture resembles material for women's stockings. In order to obtain the desired color, the canvas is coated with a polymer. But moisture resistance is provided by a varnish coating. If you prefer safety, an attractive finish and lightness, then you should choose a fabric ceiling. Oftenit is compared with polyvinyl chloride, but the first variety differs in that it has the ability to pass air. The width of the canvas can be any, and the structure will be ready to serve for many years.
Choosing a ceiling by invoice
When choosing stretch ceilings in the hall, you should pay attention to the fact that they can have a different texture. The cheapest option is a matte ceiling, which is very common among consumers. It resembles a well-plastered surface and goes well with straight planes and interiors decorated in a classic style. If you like conservative motifs in decoration, then a matte stretch ceiling with a rough surface will suit you.
When purchasing stretch ceilings in the hall, many consumers try to choose a finish that will be able to make the room visually larger. This applies to lacquer or glossy coatings that can create a unique effect when zoning a room. This design looks good when decorating dark corners. When buying furniture for such a room, you should not be zealous, otherwise you may end up with cluttered space.
When to choose a satin ceiling
Before you make a stretch ceiling, you should familiarize yourself with all the factors that are presented by modern suppliers. Among the varieties of such finishes, one can distinguish a satin ceiling, whichlooks like a surface painted with a composition with a slight sheen. If we compare with a matte surface, then satin will have a reflective effect. However, it is not mirrored. Such a surface will be easy to care for with a dry rag.
Preparation before installation
Before you make a stretch ceiling, you must analyze how strong the rough base is. If there are poorly fortified elements, then they should be disposed of at this stage. In order to prevent the canvas from inflating, all slots must be filled with mounting foam. There should be no empty space between the ceiling and walls, if there is, then it must be disposed of. From the room you need to try to take out all pieces of furniture, household appliances and household items. Access to the walls should be as free as possible. If it is not possible to take out all the furniture, then you need to move it to the center. Sheets of cardboard are laid on the floor to prevent scratches.
Required tools and supplies
If you decide to install stretch ceilings with photo printing, you will need to prepare all the necessary tools for installation, including: puncher, water or laser level, straight and angled blades, screwdriver, tape measure, heat gun, aluminum or plastic profiles. Among the additional components, it is worth highlighting the decorative inserts, which may have different colors, as well as specialclips. You will need glue, clamps and plastic rings for lighting equipment.
Work technology
In order to install stretch ceilings in an apartment, using a level, you need to make markings by applying a rope. It is advisable to use a special cord soaked in chalk. This will allow you to form straight lines along the perimeter of the room, to which a profile for stretch ceilings is applied. When choosing a guide material, it is recommended to give preference to aluminum, it has a longer service life. Holes should be made in these elements, and then marks should be transferred to the wall. Holes are drilled through them in the wall with a puncher.
Profiles are fixed on the surface with self-tapping screws and a screwdriver. In the next step, you can unpack the film by preheating the room to the temperature level mentioned above. There should be no sharp objects nearby that could damage the ceiling. The canvas should have a base angle from which installation should begin. The material is placed on clothespins so that the clips do not damage the film. For this, the edges are wrapped with soft material. A heat gun should be directed to the canvas, which will warm it up to 80 degrees. At the next stage, you should alternately get rid of clothespins, strengthening the finish, while using a profile for stretch ceilings. The spatula will allow you to distribute the material around the perimeter of the room. The next step will be fixing the straight sections.
Process is endingfastening the decorated insert to the profile, gluing the baguette to the wall can be an alternative solution. Once the ceiling is installed, you can stick a plastic ring on which a hole is cut to mount a chandelier or other fixtures.
Pros of stretch ceilings
Stretch ceilings with photo printing, both glossy and matte, have their own advantages and disadvantages, among the first one can distinguish a fairly long service life, which can reach 10-15 years. But, as practice shows, the actual period of use is much longer. If high-quality products are in operation, then under the influence of external factors they will not lose their color and characteristics. It is impossible not to highlight the environmental friendliness, as well as safety. But before purchasing, experts recommend that you familiarize yourself with the certificates of European standards. If you want the ceilings to not emit harmful substances into the external environment during operation, it is best to refuse Chinese-made goods.
Main flaws
Before purchasing the described finishing option, it is necessary to consider the disadvantages of stretch ceilings. Among them, not so high strength is most often noted. In case of careless handling, the surface can be pierced with a sharp object. Therefore, if you need to move high pieces of furniture, you need to act with extreme caution. It is impossible to call an advantage and absolute tightness, which is characteristic of PVC coatings. But some consumersthey see this as a special plus, which is expressed in the possibility of retaining moisture on the inner surface of the film during a flood.
Cost
If you decide to make repairs, then you will probably be wondering how much a stretch ceiling costs. The minimum cost is 450 rubles. per square meter. The specific price will depend on the availability of inserts, bookmarks under the chandelier, bypass pipes and corners. You should take into account that installation work will significantly increase the price of such a finish. If you are interested in the question of how much a stretch ceiling costs along with installation, then you should count on 750 rubles. per square meter.
