White ceiling: how to avoid unnecessary problems

White ceiling: how to avoid unnecessary problems
White ceiling: how to avoid unnecessary problems

Whitewashing the ceiling is a must when renovating an apartment. This is a fairly quick way to give the room signs of renewal. Such a task does not require significant financial investments. Do-it-yourself ceiling whitewashing is an inexpensive way to tidy up a room.

whitewashing the ceiling

In our technological age, there are a huge number of all kinds of finishes, however, whitewashing is the leading way. A freshly painted ceiling will look good and blend easily with any interior. Whitewashing the ceiling on its own is quite complicated, however, this is not a reason to abandon this idea. Even if you are doing repairs for the first time, when you follow all the instructions, you will be able to do this work yourself.

Proper whitewashing of the ceiling will only be achieved with proper preparation for work. It is necessary that the surface be thoroughly cleaned, because through the white color rust or other contaminants will be very clearly visible. First you need to remove the old coating, for this it is enough to walk on it with warm water and a scraper. After cleaning, carefully inspect the surface for third-party contaminants. Rust can be removed withwarm water, however, then apply a solution of copper sulfate to the treated surface. To remove greasy traces, a light, clean cloth moistened with a solution of soda is suitable.

do-it-yourself ceiling whitewashing

If there are defects on the surface, they must be eliminated with putty and primer. Due to careful alignment, the whitewashing of the ceiling will pass with a bang.

After you putty all the bumps and cracks, you should go to the primer. This is necessary so that the surface becomes smooth, and also covered with a thin film, beyond which the paint cannot penetrate. Initially, it is better to use a brush when applying a primer to hard-to-reach places. After that, you can proceed to processing with a roller or paint sprayer. Allow the primer to dry completely before beginning the next repair steps.

It is worth noting that when preparing for whitewashing, you will encounter a huge amount of dirt, so it is better to take valuables out of the room, and cover the floor and furniture with a film. At the same time, do not forget about safety precautions, be sure to wear goggles and a respirator.

After the preparatory work comes to an end, you can go directly to whitewashing. There are two options: whitewash the ceiling with water-based paint or chalk option. The water-based paint does not contain toxic substances, which makes it possible to whiten living quarters with it. All water-based paints give a good white tint and are fairly easy to apply.


The most traditional and budget option is chalk whitewash. For it, a solution of white from chalk or limestone is used.

It is necessary to select the right technology depending on the material. It is worth noting that if you apply lime mortar as the first layer, then the second layer should be the same. If you use a chalk solution as a second layer, then streaks will remain. Ceiling whitewashing is a process that should start from the window.

Popular topic