Chainsaws today are increasingly seen not only in the hands of professionals, but also owners of private lands who love to work with wood. With a chainsaw, you can cut tree trunks, cut thick branches, even cut down trees. Among other market offers, the Patriot-3816 chainsaw should be highlighted, which will be discussed in our article.
Reviews on main features
The aforementioned chainsaw, according to consumers, is a fairly powerful tool designed for domestic needs. The equipment will cope well with small trees and pruning branches. The design is easy to operate, with its help you can work even in hard-to-reach places.
This line of units, as consumers emphasize, has a braking device that instantly stops the chain when unforeseen situations occur. To prevent accidental operation, the device has a throttle lever lock.
Specifications
The Patriot-3816 chainsaw, according to buyers, has a tire of optimal length, which is 40 cm. The engine capacity here is 38 cm3. The width of the groove reaches 1.3 mm. The power of the device is 1.5 kW or 2 liters. with. The number of links in the Patriot-3816 chainsaw is 57.
The oil tank holds 0.21 liters. There is an easy start system in the design. The equipment weighs 4.85 kg. The idle speed in it reaches 3000 per minute. Users emphasize that one-handed operation of this tool is not possible for safety reasons.
Customers love the overall dimensions, which in this case are 430 x 260 x 295mm. The noise level of the Patriot-3816 chainsaw during operation reaches 113 decibels. The fuel tank holds 0.31 liters, which ensures long-term trouble-free operation without the need for refueling. The chain pitch on this model is 3/8 . Tire length is 16 inches.
Feedback on positive features
After reading reviews of the Patriot-3816 chainsaw, you can understand whether you should buy this model. Among the main positive points noted by consumers, it should be highlighted:
- Thoughtful management.
- User safety.
- Design reliability.
The throttle lever is responsible for control, the blocking of which eliminates unintentionaldevice start. As consumers emphasize, during operation, you may also like the safety of operation. The operator's hand is protected during the operation of this tool, which eliminates injury when the equipment breaks and slips.
The Patriot chainsaw is built to last. The driven sprocket is mounted on four rivets, which indicates durability. Buyers consider a balanced center of gravity an additional advantage. This makes work easy and relaxed. The cylinder walls are chrome-plated, which increases the durability of the equipment and reduces friction. You may also need a vibration isolation system, as well as an easy start.
Feedback on practicality and ease of maintenance
If you want to spend more time relaxing and less time working, you should buy the chainsaw described in the article. With its help, you can cut dry trees, prepare firewood for the winter, and also deal with bushes. All these tasks you will perform without much effort. Consumers believe that this is not a complete list of the positive features of the Patriot chainsaw. It also ensures safe operation. The chain brake is responsible for this.
You may also like the ease of maintenance. It is expressed in easy access to spark plugs and air filter. You can carry out maintenance yourself. The chain is automatically lubricated for ease of use. Good balance indicates work without stress. The handle is ergonomic andanti-vibration advanced system. Buyers especially emphasize the durability of the structure. The driven sprocket is responsible for this, which is securely fixed on the rivets.
Operating instructions: start up
Quite often, after purchasing the described equipment, users are wondering how to start a chainsaw. The first step is to set the chain brake to the off position. To do this, the brake lever is moved forward. Then the fuel mixture must be poured into the neck of the fuel tank. Oil is poured into the chain lubrication tank. Grease and fuel containers are marked with the corresponding icons.
Now you can set the ignition to the appropriate position. The choke lever is fully extended. This will set it to the "Launch" position. Now you should press the primer button several times. This will help fill the carburetor with fuel mixture.
The chainsaw is placed on a stable surface. In this case, the chain must rotate freely and be at a safe distance from surrounding objects. After reading the instruction manual for the Patriot 3816 chainsaw, you will be able to understand that in the next step you need to hold the front handle by placing your right foot on the base of the rear handle. With your free hand, you can pull the starter handle. It should catch on.
For a length of up to 30 cm, the starter handle is smoothly pulled up. Then you must lower it. The choke lever should be set to the middle position. It is required to pull the starter handle several times until the engine starts. It should be allowed to warm up for 15 seconds. You can then press the throttle trigger and remove the choke lever.
Work should be carried out while holding the saw well with both hands. It is strictly forbidden to hold the tool by the chain brake. If the engine is warm, follow the same procedures as for a cold start. However, the air damper does not extend. The primer does not need to be pressed.
Instructions for stopping the chainsaw
To stop the chainsaw, you must release the throttle, which will help reduce engine speed. After that, the switch can be moved to the appropriate position.
After completion of work, the fuel mixture may remain in the tank, which should be drained into a canister. Do not leave it in the tank for more than five days, as this can cause unstable operation of the motor. Lubricating oil can remain in the tank for quite a long time. When refueling, use only original mineral and semi-synthetic oils from the Patriot manufacturer, which are designed for two-stroke engines. Do not use 4-stroke oil in 2-stroke blends.
Carburetor adjustment
During operation, you may need to adjust the carburetor of the Patriot-3816 chainsaw. Adjustment is divided into 2 main stages. The first is basic and is carried out with the engine running. The second will need to be done when the engine is warm.
For the setup procedure, please read the manual. The first step is to turn the high and low speed adjusting screws clockwise until you meet the highest resistance. As soon as the screws reach the stop, they should be turned in the opposite direction and stopped after passing 1.5 turns. Now you should turn on the engine at medium speed and warm it up for 10 minutes.
The idle screw should be moved clockwise. It can be lowered only when the motor arrives in stable operation mode. The chain must not move during this. At idle, the engine may stall. In this case, you need to bring the adjusting screw to the stop clockwise. You may find that the chain starts to move. The adjusting screw must be turned in the opposite direction.
Cost of spare parts
During its operation, you may need spare parts for the Patriot-3816 chainsaw. A manual starter can be purchased for 650 rubles. The chain tensioner will cost you 107 rubles. You can buy an ignition coil for 1100 rubles. Welded tire - for 1050 rubles. The flywheel costs 450 rubles, the deflector - 194 rubles, and the candles - 80 rubles. The carburetor will cost the consumer 690 rubles. The leading sprocket can be bought for 330 rubles.
Conclusion
Beforeto start operating a chainsaw, you must realize that it is you who determine the life of the tool. To do this, properly distribute the load and allow the tool to rest. Chainsaw loves grooming.
The machine will be ready to last longer and surprise you with ease of operation if the working body is clean and well lubricated. The sawing part has its own resource of work. The bus can survive two circuits. As a rule, the chain lasts for 2-3 sharpenings. After that, you need to part with her.
