Many people are often interested in the question of how to disassemble the closet for moving. And this is really important. Even if you are not moving, you still want to change the situation by updating the interior. No piece of furniture can stand in the same place for half a century. To move furniture or take it to another room, sometimes you have to disassemble it. But what about those who are going to move due to unforeseen circumstances and have just bought a new wardrobe? Don't leave him!
There is a solution and, no matter how trite it may sound, lies in the simple dismantling of the structure. To cope with this task, it is worth studying the disassembly instructions in detail, because the cabinet must be disassembled not even because of the inconvenience of transportation, but due to the fact that when moving to a new place, some sections or structural details may be damaged, spoiling the appearance of the piece of furniture. It's sad, especially if it's new.
Your attention is presented a simplea guide that describes the main stages of disassembling the structure and exhaustively answers the question of how to disassemble the wardrobe.
What does the overall dismantling scheme look like?
In order to understand the issue and subsequently perform the assembly correctly, no special knowledge or skills are needed. Getting started with this work, it is worth remembering one important feature. In the manufacture of sliding wardrobes by different manufacturers, different modifications of parts are used as fasteners and accessories, each of which is characterized by its own characteristics. Therefore, when dismantling furniture, the main thing is not to rush. Everything else is easy to figure out without spending a lot of time on solving the problem.
So, how to disassemble the closet. The general scheme consists of several stages and looks like this.
Removing facades
Be guided in this work by the simple rules described below. They will help you get things right.
The subtleties of dismantling are that:
- Swing doors are easy to remove. They are hinged, so here you need a screwdriver, with which you have to loosen the screws. They are located on each hinge on the side of the side panels. After that, the facade is removed without difficulty, it is important not to drop it.
- With bottom-supported doors, things are even simpler. They are lifted, not forgetting to open the locks on the wheels below, and with a smooth movement they move down and towards themselves. After that, the “rollers” are pulled out of the upper guide.
- With hangingdoors, solving the question of how to disassemble the wardrobe is more difficult. It all depends on the type of suspension for rails, which, as you know, can be mounted under or above the roof.
- The bottom rollers are often hidden under or above the floor sheet. Each type of castor is disassembled in its own way, so the procedure is somewhat different, but the principle remains the same: lift the door, remove it from the top from the side of the support wheel from the guide, then from the bottom, from the holding bar, pulling the door leaf a little down and towards you.
Removing the back wall
You are getting closer to the answer to the question of how to disassemble the wardrobe with your own hands. After the facade is removed, you can proceed to further dismantling, namely, the removal of the rear wall of the product:
- It happens that the back wall is tightly screwed to the ends of the shelves and the base of the cabinet, so in this case you have to tinker and remove all the fasteners. This will make it possible to move forward according to the plan.
- When the back wall is attached to the grooves of the side walls and the cabinet lid, save this step for last and return to it when all other work is completed, namely, the frame is disassembled.
Removing cabinet shelves
The next step is to remove the shelves, which are located horizontally and are used to store things, and in relation to the side walls and partitions in a perpendicular position.
The most diverseaccessories, therefore they are also removed using a distinctive technology. For example:
- Shelves sitting on eccentrics are disassembled with a Phillips screwdriver and are located directly under the shelf. They are unscrewed clockwise, and the shelf is removed upwards.
- When using European-style screws as fasteners, first the screws are unscrewed from the ends (for this you need a hexagon), and then the procedure is repeated, only from the side.
- When dismantling furniture shelves assembled on hexagons, first open the covers of the plastic parts, and then unscrew all the screws.
The case is small: the dismantling of partitions
To disassemble the built-in wardrobe, it remains only to dismantle the partitions and sidewalls, following the principle described above, which is used in working with shelves. Dismantling standard furniture, you definitely will not get confused. Therefore, problems should not arise in resolving the issue related to how to disassemble the closet, and then assemble everything back, transferring or transporting it to the right place.
What to consider during dismantling?
Please note that when moving on to dismantling the door, you should be extremely careful. Here, each mechanism is removed separately and preferably in the sequence described below:
- closer;
- locks and slings;
- each guide;
- bottom rollers;
- all fasteners that can be found;
- sashes.
Now you know how to disassemble a wardrobe, but do not forget that both the dismantling process and the assembly of any product, not just a wardrobe, require accuracy. Follow the instructions carefully so as not to make a mistake in any action and not damage the furniture. Remember, the more carefully you take it apart, the easier it will be to return everything to its original form.
