Every person strives to protect any of his property as reliably as possible and preserve it. In our turbulent times, when theft has become one of the most common types of offenses, it is very important to secure your home from outside interference. Over the past few years, attacks have occurred more and more often outside the city limits, which is why the owners of country estates are thinking about the need for signaling for a summer residence. High-tech device provides the highest possible protection without requiring people to be physically on site
Basic device information
What are the tasks and basic principles of the alarm system for giving? First of all, the device is designed to record the fact of violation of the boundaries of ownership and give a signal about this event (siren, information to the security console, SMS to the owner).
The simplest system of any kind willconsist of the following elements:
- Fixing devices (sensors of various categories).
- Control devices (keypad or key fobs, used for disarming/arming, reprogramming, etc.).
- Executing device (control panel, receives an alarm signal from sensors and transmits it to responsible persons).
What are the sensors?
The simplest classification of signaling involves the division into two categories - wired and wireless systems. In the first case, all devices are interconnected using a special cable and powered from the power supply system, and in the second, individual batteries are the power source. If desired, each person can retrofit the basic structure of the system with the help of additional devices, a siren (sound and light), video cameras, water leakage sensors, gas and other excesses.
What to look for when choosing an alarm?
What characteristics and features should a burglar alarm for a summer residence have? If you are not an expert in this matter, be sure to consult a knowledgeable person about choosing a specific type of device. As a result, your choice may be influenced by factors such as:
- presence of heating and temperature in the house (many sensors do not work in the cold season, at low temperatures);
- availability of uninterrupted power supply (for installation of a wired alarm);
- necessity to have a picture, sound;
- room area (the number of security sensors is determined);
- GSM signal strength, presence/absence of city telephone line.
Many reviews contain information that a wireless alarm for giving is not the best option, this is due to the widespread belief about the reliability of wired devices. In fact, this is far from being the case, and every kind of security device these days is characterized by increased reliability.
GSM system features
Quite often you can meet the opinion that GSM-alarm system for giving is one of the best modern security solutions. Devices of this type can be both wired and wireless, their distinctive feature is a GSM transmitter that transmits a signal via a SIM card to the mobile phone of the property owner or to the remote control of the responding organization.
A burglar alarm for giving this type implies the presence of a fairly large number of various sensors. Most common:
- Motion sensors (infrared devices that respond to the movement of a person or a large animal within the perimeter entrusted to them).
- Glass/window sensors
- Door opening sensors (consist of two parts connected to each other, when the door leaf is opened, the halves open and generate an alarm).
- Devicesof a specific nature (devices that respond to smoke, water, gas in the kitchen).
You can install a similar system with a set of sensors suitable for you either on your own or by inviting a specialist to your home. Modern GSM-alarm systems for cottages are most often produced in the form of wireless models, which makes installation easier and does not violate the aesthetics of the interior.
Affordable security and autonomy
Autonomous alarm system for summer cottages is a great solution for many people who want to save on monthly security payments. Reading the reviews of many users about systems of this type, the following qualities can be noted:
- Economy (such devices are cheaper to install and maintain).
- Reliability (the system rarely fails and does its job well).
Within the framework of such an alarm, it is logical to use only security sensors. Special devices responsible for the safety of human life must necessarily have access to third-party help services. These are sensors for protection against fire or gas leakage.
Distinctive characteristics of an autonomous alarm system come down to the fact that the alarm signal is not sent to the remote control when the normal mode of the sensors is violated, they generate a signal that is expressed either in turning on the siren or in sending SMS to the phone to the owner.
Alarm for giving do-it-yourself
If you really want to secureown property, but cannot afford such a system due to lack of funds, then it is likely that an alternative solution will suit you - a homemade burglar alarm. The principle of its operation is in many respects similar to the operation of an autonomous system. The appliances you install should perform two tasks:
- generate siren operation;
- inform the owner in case of his absence about illegal entry.
You can buy all the components of the alarm system for giving in the market or in a specialized online store. You will need several sensors of different types, for example, on the door and on the window. The number of such devices is determined by the area of your house and the number of rooms in it. On average, the price of one device is approximately $15-25 for a motion sensor and $5-10 for a reed switch for opening a door. Of course, there are more budgetary, as well as more expensive options that differ in their technical characteristics.
A very important point is a good sound notification that the alarm should have. The siren for giving should have a loud and sharp sound that will scare off the robbers and alarm the neighbors from other areas.
Where to place sensors and siren?
So, how are the elements installed? First you need to mount the sensors. For a small room with one window and one door, two devices will be enough: one for the volume placed near the window, the second for opening the doors. The next step is installation.sirens. Powerful sounder models require significant power, so alarms with such devices are often made wired.
Place the device in a hard to reach place, this measure allows the siren to work as long as possible while intruders try to get to it and turn it off. The wires coming from the device must be securely hidden in the box in such a way that they do not experience the effects of external conditions (dampness, wind, moisture) as much as possible. Among other things, in order for the alarm to work, you will need an adapter, a relay, a certain amount of wire.
Mounting the system
So, let's start a step-by-step plan for connecting an alarm, consisting of one reed switch, one volumetric sensor and one siren. Sample steps would look like this:
- checking the operation of the reed switch (closed doors - the contacts are closed, open - vice versa);
- connecting the sensor to a power source through a relay (be sure to observe the polarity);
- connecting a siren (plus to the adapter, minus to the relay in the closed state, when opened, an audible signal sounds);
- install the infrared sensor, connect it through the relay to the adapter and the siren, adjust the alarms.
Finally
If you have not yet become the owner of an alarm system for giving, be sure to think about such a necessary and useful purchase. Minor expenses for the system and its installation,certainly cannot be compared with your worries about the safety and integrity of property. A variety of alarm options will allow you to choose the appropriate model (with a GSM transmitter, autonomous, wired and wireless). If the offers of firms do not suit you, you can assemble the security device yourself.