Every second person is familiar with this situation: he came to his house, but the lock does not open or the key is simply missing. And what to do in such a difficult situation? Change the lock on the front door or do something else? Depending on the specific situation, several simple options have been developed. Sometimes you can cope on your own, without outside help.
What to do?
If you lose the key, you need to change the lock, but for now, use the tools that are at hand to open the front door. Depending on the structure, certain and simple manipulations are carried out:
- Using a drill. It is required to drill a small hole above the keyhole. This is done in the case of equipping the front door with an internal lock with a cylinder. After drilling with a master key, the lock clings and the hook moves. Suchthe hole can also be drilled in the cylinder. A small piece of wire is inserted into the hole and rotated in the direction of opening the door lock.
- Using a simple screwdriver. If there is a tongue in the locking mechanism, a screwdriver is an effective tool. The tool must be inserted inside, hooked on the tongue and driven into the keyhole. In this case, the door stretches towards itself, and then opens. Instead of a screwdriver, you can use a plastic card.
Steps before changing the lock
When using a lever lock, the following procedure is required. This method is completely different from the instructions on how to change the ignition lock, so refer to the instructions more carefully.
Changing the ignition lock is another thing entirely. Required:
- Loosen the bolts.
- The key is inserted into the brand new ignition lock in position 1.
- Next is the mounting to the steering column.
- If all is well, then the bolts are tightened until the heads break.
And changing the door lock is much easier:
- Pull the door handle towards you, slightly, moving the door away from the frame as far as possible.
- Gently insert a thin tool into the slot.
- Move the levers inside the door lock.
If you have a door lock with a latch in the form of a handle, you need to unscrew the locking mechanism and carefully remove it. Then the metal panel that closes the mechanism is removed, and a screwdriver or stud squeezes the latch,helping to open the front door.
Remember: to prevent unnecessary problems with the lock, you need to purchase a mechanism without a keyhole, since this is possible in the modern world. Today provided a huge selection of goods.
Lock replacement tools
The second common problem in which it is impossible to open the door is the breakage of the key in the keyhole. This can happen due to diverse and different reasons, which means that the solutions will be completely different. Consider many questions: how to change the larva in the castle, what tools are needed and much more.
What do you need?
When replacing a door lock yourself, you need to have at least simple tools on hand. Replacement requires the following:
- Pliers.
- Saw.
- Jig saw file.
- Crowbar.
- Screwdriver.
- Drill.
Of course, the tools needed to change the door lock cylinder may not be at hand. But then you should resort to the services of a neighbor on the landing.
Procedure for changing the lock
Specific tools and actions are used to change the lock. How to change the lock or how to remove the key? Here are popular options for problems and solutions.
- When replacing, the following steps should be followed: it is necessary to pull out the larva, remove the bolt at the end of the bar, then the larva can be easilyand take it out without any problems.
- Now it is worth dismantling the slats: unscrew the fasteners-screws, remove the handles and slats.
- The next step is to unscrew the fasteners and very carefully remove the door lock body.
- With the mechanism removed, an urgent need to go to the supermarket or the nearest hardware store to purchase a similar lock (this will save you the most difficult fitting work).
- It often happens that when purchasing a brand new door lock, there are incidents. It is slightly different from the previous one, and it will be a little problematic to replace it. But nothing! You can deal with this too! Everything will have to be adjusted. We try on a brand new case in a groove that exists, and look at whether its expansion is important. The body must never touch the walls.
- The next step is to try on the end plank.
- We drill holes of the diameter we need, then at the same time we mark the location of the holes for the larva of the new lock. Unnecessary immediately delete.
- After everything is adjusted to the elements of the castle, it is worth starting to assemble a brand new mechanism.
- Insert the case and fasten it with two screws at the end of the door. How to change the larva in the castle?
- You need to install the larva, tighten the fixing screw also at the end of our front door.
- Next, insert the axis of installation of the input handles and the latch drive, put on the handles with decorative strips and tighten them tightly with screws. Fasten with a striker in the door frame.
- And the very last touch in the work called "How to changedoor lock" will be what you need to check the smooth operation of the door lock. We turn the key without any jamming, the crossbars move without any flaws. Everything is fine and fine, the work was done efficiently and competently.
Conclusion
In conclusion, I would like to note that if it was not possible to change the lock on the door yourself, then you can and should turn to the services of a specialist. The craftsmen will do everything themselves with high quality and competently - they will come, remove the key from the internal or external lock and open the door or simply change the door lock. They will be charged the minimum wage for this work.
