Not so long ago, heated floors could be found only in the premises of public buildings for special purposes. Already today such systems are widespread among private consumers. They are on sale in a wide range. Reviews of underfloor heating allow you to understand which model to give preference to.
Water floor reviews
Such heating will be most effective on an area larger than 30 m2, as the system has low operating costs. Water systems are suitable for private houses with autonomous boilers. If you want to equip a warm water floor, you should read reviews about it. In them, consumers note that such a design is undesirable in an apartment, because its operation will be accompanied by a change in hydraulic resistance.
Consumers emphasize that the initial cost of installing a water-heated floor is quite high, but if we are talking about a large area, then it is possible to save electricity by 15%. Buyers also likefire safety of such systems, as well as the ability to arrange furniture, regardless of the location of the pipes.
You can use such heating as a main or additional system. It has a long service life, which depends on the technical characteristics of the pipes. If the house is disconnected from electricity, then the water floor, as consumers emphasize, will give off heat, but only if the boiler is non-volatile.
Reviews on electric underfloor heating
After reading the reviews of underfloor heating, you can understand that electrical systems are good because they have a wide area of use, so they are often installed in bathrooms, bathrooms and kitchens. This is due to the fact that installation in this case is cheaper than a water floor. It is recommended to do such a system in a new apartment, which is especially true for the case when finishing work has not yet begun.
By type of heating, electrical systems can be infrared or conventional. In the latter case, the floor will be based on a heating cable, while infrared systems are film floors. Each of these varieties is characterized by its own characteristics.
Reviews on self-regulating cables and heating mats
The warm floor is based on a cable that fits in a snake. The design also provides for the presence of a thermostat. According to the principle of operation, cables can be different, butself-regulating have the most advantages. Made from a polymer matrix, they are durable and versatile according to customers.
The first feature is expressed in the exclusion of the possibility of overheating. This is due to the lack of a coupling. As for versatility, it should be mentioned here that the cable can be laid under natural floor coverings.
After reviewing the reviews of underfloor heating, you will notice that the heating mat attracts consumers because it has an affordable cost and is easy to install. Such products are often compared with a cable, but the former are cheaper, have a self-adhesive base and are available in rolls. The last two factors, according to consumers, facilitate installation.
Initially, such systems were developed for premises where it is not possible to equip a multi-layer cake, characteristic of a cable system. This explains why the main uses for mats are:
- bathrooms;
- kitchen;
- bathrooms.
They often use ceramic tiles as flooring. Consumers like that heating mats are now being produced for rooms where it is not possible to raise the floor level higher than 1 cm. The grid, if necessary, can be cut into separate fragments, the integrity of the cable will not be violated. The material is laid on the area of any configuration.
Reviews about film floors
Reading reviews offilm heated floors, you can understand that they provide a high degree of protection and water resistance, because they consist of carbon strips that are interconnected by special contacts and a copper bus. Buyers emphasize that the heating elements are laminated with electrotechnical polyester, which guarantees moisture protection.
After reading the reviews of the infrared warm field, you will notice a wide range of uses. After all, such systems are often found in rooms without stationary heating. Such systems can be used during the off-season, when the batteries are disconnected. This floor can heat walls and ceilings.
Film systems are common in apartments and houses, as well as hospitals, hotels and kindergartens. This applies to all facilities where "he althy warmth" is required. Considering many factors, most consumers believe that infrared floors are the best solution because they are economical, easy to install, resistant to mechanical damage, mobile, flexible and safe.
Information about foil flooring
Before you purchase an electric underfloor heating, reviews of such a system must be read. If we are talking about a film version, then it will be based on the operation of a heating carbon film. In the process of connecting to the electrical network, it begins to emit infrared rays and anions. The role of the emitter is performed by carbon paste, which is applied in the form of even or curved parallel strips.
Consumer opinions
According to buyers, such underfloor heating, reviews of which may be positive, have hidden contacts, so before installation, you should test the system's performance. You should also follow the process of laying the flooring. Buyers also consider the need to use a connector that provides contact between the wire and the film as a minus. If you decide to use ceramic tiles as a finish coat, then they are laid using a special adhesive, which is applied with a thickness of 15 mm or more.
Which floor to choose for tiles
If you want to lay a warm floor under the tiles, reviews of several options for such systems must be read. You can implement the idea with a single-core, two-core or ultra-thin cable. The latter is placed in a screed, and the electricity is connected through a thermostat.
You can use a sand-cement screed for a floor device based on single-core or two-core cables. If you want to choose the best underfloor heating, consumer reviews must first be read. From them you can find out that a single-core system will be cheaper, but it will definitely need to be returned to the thermostat, which cannot be said about a two-core cable that can be used in a room of any layout. If you lay the screed, it will add an additional 5 cm to the floor, and after installing the tiles, the floorwill become 6 cm higher. Cement-sand hides the height, but in the process it accumulates heat, conserving energy resources.
Some consumers, they say, prefer mats that do not require additional screed. The cable is ultra-thin, it is laid on a polymer mesh base, it is characterized by insulation stability and high strength. During installation, such a mat is laid in a layer of glue on an old screed. The level of the floor will rise only 1.5 cm, which will be the height of the layer of glue and tiles. Additional thermal insulation is not required.
In conclusion
Choosing a warm floor is a rather responsible process, so when choosing it, you must be guided by some rules. At the first stage, you must decide on the type of heating system, and also decide whether it will be auxiliary or main. In this case, the characteristics and features of the room, the properties of the electrical wiring, as well as the type of flooring are taken into account. Sometimes you have to use not only a suitable finishing material, but also a special glue.
