Plastic windows instantly attracted consumers immediately after their entry into the market. Currently, almost no one installs their classic wooden counterparts. Their advantage is also that not only a professional with experience can mount them. After reading our article, you will learn how to properly install a plastic window. So let's get started.
When installing such double-glazed windows, there are the following nuances:
- You can install them even in winter. However, you yourself must understand that it is best to work in the warm season. In addition, in summer and spring, mounting foam hardens better. Since it is necessary to install a plastic window correctly according to all the instructions, this process can take more than one day: living in an apartment blown by all the winds will not be very comfortable.
- The need for accurate measurements of window openings. The success of the entire event depends on the success of taking measurements.
If you want to installplastic windows are cheap (on their own) in a panel house, then the inner opening should also be measured. The fact is that in such cases the box with frames rests on the opening, the section of which resembles the letter "G". Measurements are carried out according to the following instructions:
- measure the distance between the side slopes;
- measure the distance from the window sill to the slope on both sides;
- note that the width of the window sill should be equal to the width of the wall, except for the width of the profile.
Before you properly install a plastic window in a brick house, you should determine the load-bearing wall, since it usually has a thick layer of plaster on it. This should be taken into account when measuring window openings.
It is believed that it is easiest to install double-glazed windows in a wooden house, but this is not so. Please note that wood is a capricious material, it easily expands and contracts under the influence of environmental factors. And therefore, you need to install windows on the pigtail. This is an independent structure made of timber, similar to the strapping of a door frame. Thanks to her, the windows do not jam or deform due to the "movements" of the tree.
Once again: since it is quite difficult to install a plastic window correctly, you must carefully follow the instructions.
- Having pulled out the plugs, pull out the double-glazed windows themselves.
- Mark each of them so as not to be confused during installation.
- Remove the protective film from the ends by sticking paper tape or similar covering in its place.
- Glue a vapor barrier film on the end of the plastic frame.
- After installing the bearing blocks in the opening, put the assembled window on them.
- Carefully adjust it using a spirit level.
- Finally fix the box with metal profiles and fill the voids with high-quality mounting foam.
- Install the window sill, ebbs, and then carry out the installation of double-glazed windows. Attach the plugs to start from the top.
- Install internal slopes, fix the decorative profile.
If you strictly follow all our instructions, then you can install plastic windows (Moscow will amaze anyone with their assortment) quickly and efficiently. We wish you success!
