Your washing machine has been serving you for several years, but periodically you hear a knock when it works? Or do you see soapy water on the floor after washing? The washing machine is probably broken. Why did it arise and what to do in this case? Next, we will look at typical breakdowns of washing machines of different brands, their causes and solutions.
The machine does not turn on
The power button does not work - this is perhaps the most common breakdown of a washing machine. Why is this happening? The washing machine may not turn on for two reasons:
1. It is not connected to the mains. In this case, it is necessary to check the serviceability of the socket or cord from the machine itself.
2. Switching on is blocked by a malfunction within the device itself.
If everything is clear with the first reason, then what to do in the second case? Here you can not do without the help of a master. Only after the diagnosis, he will be able to establish the cause of such a breakdown. Most often, the washing machine does not turn on in cases where:
- the Start button is broken or oxidized;
- has fallen into disrepairsunroof blocking device;
- electronic module broke;
- circuit wires broke.
Machine takes longer to wash than usual
This is a fairly common breakdown of the Indesit washing machine. Despite the fact that the devices of this company are made in Italy, they are also subject to various malfunctions. The reason for this failure may be hidden in a malfunction of the electronics, water temperature sensor, device controls, etc. In addition, such a malfunction occurs due to the incorrect position of the drain hose.
If you notice that the drum is spinning slower than usual, then most likely you just overloaded your machine.
In most cases, you can solve such a problem as a long wash yourself. First you need to check that the drain hose is 60 cm from the floor, and also make sure that you have not overloaded your machine. If this is not the cause of the breakdown, you should contact the master.
Machine makes noise while washing
This is another frequent breakdown of the Indesit washing machine. However, it also occurs in devices from other manufacturers.
Some washing machines, including Indesit, always knock when washing. This is due to the design features of the units. However, sometimes this problem occurs unexpectedly. What is the cause of the problem? Most likely, a foreign object got into the machine. After washing is completedcheck your "assistant" for extra things. If you did not find anything, then there can be two reasons for the breakdown:
- bearings failed;
- the machine was not installed correctly.
Only an experienced master can solve these problems.
All indicators blink
This is a fairly common breakdown of the Samsung washing machine. Its elimination can be facilitated by the fact that almost all devices of this company are equipped with a display that shows error codes. So, for example, if the designation “ZE1” appears on the screen, this means that the engine is overloaded, and the combination “9E2” indicates that the control module is broken.
If all indicators flash on the machine and an error code is shown on the display, then you can determine the cause of the breakdown yourself. But what to do if there are no numbers on the screen? This means that the failure should be sought in the electronic board. Unfortunately, only a master can install and fix such a malfunction.
The machine does not drain water
If this is a problem, consider how long it has been since you cleaned the drain pump filter. If not, then the cause of the breakdown lies precisely in this. Also, the washing machine may not drain the water due to malfunctions of the pump itself. However, it should be said that its breakdowns occur in most cases precisely because of a clogged filter.
This is a fairly common failure of the LG washing machine. To find out exactly what the problem is, you can usespecial code "OE", which will appear on the display.
Water under washing machine
If during washing you find water under your washing machine, do not rush to sound the alarm. Maybe it's the underwear. If you're washing curtains, puddles of water under the washer are common. The fact is that such material does not absorb moisture well. As a result, excess foam is formed, which flows out through small holes in the machine.
If you wash everyday things, then the cause of such a problem can be very serious. So why else would a puddle of water form under the machine?
- Hose leak. You can eliminate such a malfunction yourself and at minimal cost.
- Problems with the dispenser. To eliminate such a breakdown, it is necessary to get the drawer into which the powder is poured and clean it thoroughly.
- Manhole cuff leak. If you notice that water and foam are coming out of the door, then the problem lies in the cuff. You can fix the damage yourself by sealing it, or you can order a new part.
- Tank leak. This problem often occurs in people who often machine wash shoes, belts, and clothes with iron or other hard decorations. It is impossible to fix a tank leak on your own. In this case, it will need to be replaced.
Water is not heated
Everyone faces such a breakdown from time to timeuser. In order to eliminate it, it is necessary to find out the cause of the malfunction.
Put your hand on the hatch door. If after 10-15 minutes you feel warm, this means that the heating element is working properly. If the door does not heat up, then the cause of the breakdown should be sought in the heating element. In this case, the heating element will have to be replaced.
In addition, the cause of such a breakdown may be hidden in the pressure switch. In this case, it must be removed from the machine and blown through.
Another common reason that the device does not heat water is an open circuit of the heating element.
Regardless of where and when the breakdown occurred, it should be fixed immediately. So you extend the life of your washing machine and keep your family he althy.
