If you are a fan of fishing or hunting, then on a long trip you will probably need a little oven. Such a design can be made independently, using improvised materials and tools for this. It acts as an effective substitute for a campfire. It will require much less fuel to operate. Dry branches, cones, tree bark, reeds or wood chips can play its role. You can also use the coals that will remain from the old fire.
Design Features
The little oven will be much more profitable compared to standard equipment that has a grate. Such structures quite often do not have a bottom, which allows you to place firewood directly on the ground. This slows down combustion, and if there is a need to lay a new portion, then the ignition will occur almost instantly, but the thrust in this design will be maximum. Additional advantages include cost-effectiveness, efficiency, versatility, and autonomy. Among other things, such furnaces have small dimensions, which is very convenient whentrips out of town. Such equipment is able to burn for a long time without generating excessive amounts of smoke.
Making an oven out of a tin can
The little oven can be made using primitive technology, for this you need to prepare a tin can, which can be replaced with an iron mug. The minimum size is a prerequisite - like a tall glass. Further, several holes will need to be made in the bottom of the mug, which will provide traction. The middle stove should have holes that should coincide with the internal channel for the movement of oxygen. You can apply the option, which involves making one large hole, but in this case, the coals will fall out. Now you can fill the jar with small wooden chocks, their thickness should be approximately equal to the thickness of your finger. Such fuel should not go beyond the edges of the can. It is necessary to lay firewood strictly vertically. After that, it is necessary to remove one chock from the central part, which will ensure the passage of air. Paper must be placed in the formed channel, which can be replaced with dry grass, after which it must be set on fire. Such a little oven, the volume of which is approximately equal to 500 ml, will burn for about 25 minutes, this time will be enough to cook food in a hurry. Hunters often make sure that there is no smoke, and such self-made equipment just eliminates the appearance of smoke.
Recommendations for work
If several people take part in the trip, then such a jar will not be enough, in this case it is recommended to use a container of 1 or 2 liters. However, in this case, it will be necessary to maintain stable combustion with the help of firewood of more impressive sizes, and their number should be larger. If you kindle a flame in such a design, it will burn for about an hour. This will be enough to boil potatoes or barbecue on charcoal.
Making an oven from a pot
If you make a little oven with your own hands, then you can apply a technology that involves the formation of a two-layer structure. To do this, use a pan, which is made of stainless steel. It can be purchased at the store, and it is quite inexpensive. If you pay attention to the design of this oven, it can be noted that it consists of two pans that have different sizes. These components are built into each other. In the side wall in the pan, which is located outside, it is necessary to cut an opening through which it will be convenient to load fuel. Whereas at the bottom it is necessary to make parallel grate slots, which can be provided with rotating bridges. It can be ordinary holes. You need to install a stand on the grate, after which it is loaded with firewood, on top of all this you need to put a second pan, which has lessdiameter, it will be heated by the flame. The second pan will be engulfed in fire, among other things, it will additionally warm up from the walls of a large container, thanks to which fuel consumption will not be so impressive. The bow for the bowler must be made in such a way that it looks like a removable element. If such a small oven is made with your own hands, then it will be very convenient to use it, because it has a small weight even when loaded.
Making a folding oven
If you are not afraid to spend a little more time, then you can work on a folding design that will be very effective. Working on it, you will have to spend more effort, among other things, the master will need to carry out preparatory work.
Required materials and tools
In order to start making a folding stove, you need to prepare a grinder, an electric drill with a set of drills, a tape measure, pliers, a file, and also spokes from a bicycle. You will need piano hinges and a steel sheet, the thickness of which should be equal to 1 millimeter. If it is possible to find old sheets from the refrigerator, then it will be possible to use them. Side walls borrowed from an old computer system unit will eliminate the use of sheet steel.
Features of the work
If a little oven is being made, drawings will have to be preparedearly. Further, all structural elements must be marked up, for this it will be convenient to use templates. Blanks are cut from sheet steel, you can use a grinder for this. In the workpiece, which will form the basis of the bottom, it is necessary to make a hole. After all the edges must be processed with a file, which will eliminate errors. Now you can connect the side walls of the future structure to each other; riveted piano hinges are perfect for this. The result should be a box. Along the perimeter of the bottom, as well as on the lower edges of the side walls, it is necessary to provide in advance the ears, which must be bent in one direction. An element must be placed under the box, which will act as the bottom, while the ears of the two elements must connect on each side and form a tube. Pins made from knitting needles borrowed from a bicycle should be installed in it. Such a small trick will make the design more stable in operation. If you need a little oven, reviews of which are only positive, you can read everything about its manufacture in this article. At the next stage, additional protrusions must be made on the grate, which must be installed in the holes cut out on the sides. There should be another hole in the box through which you can load fuel. Cutouts to be made in the top of the box can increase traction, and can be used to stack skewers, among other things.
Making an oven from several cans
You can choose toyourself the oven design that best suits you. For example, a small bag can be made from several cans at once. First you need to prepare 3 jars, 2 of which will have a smaller size, while another one will be large. After that, you need to take care of the presence of scissors for metal, marker, as well as asbestos. After that, you can proceed with the manufacturing steps.
Working on the oven
If you need a small little piece, then you need to start making blanks. For this, a large jar is taken, from the bottom of which it is necessary to retreat 20 centimeters. A smaller jar is applied there and circled with a marker. This will form an even circle. A hole is cut out in this circle so that the jar enters it, but with some effort. In a smaller jar, you need to make the same hole, and then place the smaller jar in a large one. On one side of the jar, you need to make cuts of 2-3 cm. Next, you need to use the lid from a large jar, in which a hole is made for a small one. All cuts must be sanded. On the wall of the can, it is necessary to make vertical slots, the dimensions of which are approximately equal to 2 cm. The voids between the cans can be filled with asbestos, then close the lid and bend the metal. Next, you can make a shelf for firewood, for this you should use a piece of tin. This element is fixed after cutting. Such a small small oven may have a handle so that the design is convenient to carry. On this we can assume that the device is ready. It can be covered with paint.
Conclusion
If you need a Poshekhonka stove, the manufacturer (Mosverf company, Rybinsk) offers to purchase it at a fairly affordable price - within five to six thousand rubles. However, in this case, you will have to spend money, and if you make it yourself, you do not need to purchase almost any tools and materials. If you plan to use such a design for a long time, then it is necessary to foresee its design features and size in advance. Only in this way will the equipment be efficient and durable. In general, you yourself can develop your own work algorithm. Dimensions can be chosen empirically. This is advisable for the reason that you will not have the opportunity to spoil the materials and overspend, because you will not need to purchase anything, and you can also take tools from acquaintances, friends or comrades.
