Perhaps, today you will not surprise anyone with the presence of an automatic washing machine in a modern apartment. These home assistants have firmly entered the lives of many people. Modern technologies make it possible to simply load dirty laundry into the washing machine tank, fill in a special detergent, select the desired washing program and get clean clothes after a while.
But it's only at first glance, everything is so cloudless. In fact, every owner should know the basic methods and recommendations for cleaning the filter in a washing machine. Compliance with these rules and recommendations will extend the trouble-free operation of the unit for many years.
Timely cleaning of the washing machine filter is a must, as blockages can lead not only to an unpleasant smell of washed clothes, but also to a more serious breakdown of the unit.
Assignment of washing machine filters
Washing machines of modern manufacturers are equipped with two filters: inlet anddrain.
A special drain filter is present in any washing machine, and it is connected to the unit's pump. Its main function is to purify water during washing, so that small objects and various debris cannot get inside the tank.
The inlet filter is not installed in all models of washing machines. Structurally, it is a mesh on which various impurities settle. The main function of this device is to clean the incoming water into the machine from tap dirt.
Regardless of the model used, every owner should know how to clean the filter in the Indesit washing machine. This simple operation must be performed regularly.
Signs of clogged filter
Filter clogging is considered a malfunction of the Indesit washing machine, which can cause it to stop or malfunction. The main signs of a malfunction of the unit are:
- After washing or rinsing, water drains very slowly, and with a dense blockage, it may stop altogether.
- During washing, the machine stops the program and does not resume it even after restarting the system.
- The control unit issues a signal about incorrect operation or displays an error code on the display, which is individual for different manufacturers.
- Spin or rinse does not start.
- Unpleasant smell from the washing machine, whichwashed items are impregnated.
- An inopportunely cleaned filter can cause the pump to break down and stop pumping water.
Also, if the drain filter of the Indesit washing machine is clogged, an unusual extraneous sound may appear that accompanies its operation.
Filter position
Determining where the filter is located in the Indesit washing machine is easy. The inlet filter is usually located where the water supply hose connects directly to the unit.
The drain valve is located at the bottom of the unit, it can be found under the filter cover of the Indesit washing machine. Often this important node is located, regardless of the type of unit loading, on the bottom right. In some models, it can be hidden under a decorative panel. Before removing the panel, it is recommended to read the user manual, which indicates how to open the protective bar. Sometimes it is attached to swivel hooks or shifted to the side, so before removing the filter on the Indesit washing machine, it is better to familiarize yourself with the method of removing the decorative panel.
Remove the panel by carefully prying it out with a flathead screwdriver or scissors. Most often, Indesit manufacturers make the part from black material, so it is very easy to detect it.
Filter extraction technology
The drain part is made of very thin plastic material. Therefore, before removing the filter from the Indesit washing machine, you need to carefully pry it with a screwdriver from both sides and remove it only when it starts to move out of the hole, excluding any effort.
Standard filter can be removed from the socket by turning it a couple of turns counterclockwise. Then gently pull it towards you. Remember that no matter how the water pump works, there is still liquid inside it. Therefore, before cleaning the filter in the Indesit washing machine, place a dry cloth under the panel that can absorb water. This simple action will save you from the trouble of liquid leaking onto the floor surface.
Inlet filter cleaning procedure
Structurally, the inlet filter is a special mesh capable of retaining sand or rust present in the incoming water. Not all manufacturers install such a device on their models, but if it is present, then you need to know how to clean the filter in the Indesit washing machine. If this operation is ignored, water supply to the tank may stop.
The procedure for cleaning the inlet filter is as follows:
- Disconnect the washing machine from the mains.
- Turn off the water supply tap.
- Carefully disconnect the water supply hose, which is located on the rear wall of the unit. Doing this process carefullybeing careful not to lose or damage the rubber seal. First, we substitute a container under the hose to collect water, which may leak from the sleeve.
- Then you need to remove the filter itself from the nozzle. You can do this with pliers.
- Under running water, use a small brush to clean the filter mesh.
- If there is an additional grid, it must also be cleared.
- After completing all the operations, install the parts back.
- The last step will be to install the hose in its original place. Then we open the water supply tap and carry out a test run.
The frequency of cleaning the inlet filter depends on the quality of tap water and the number of washes.
Cleaning the drain filter
More serious malfunctions of the Indesit washing machine may occur due to clogging of the drain filter, which is installed in all models. The algorithm of actions is as follows:
- We are dismantling the plastic decorative panel at the bottom of the unit.
- Remove the remaining water. For this, some models are equipped with a special hose. In its absence, you can use improvised means (basin, rag).
- Turn counterclockwise to remove the drain plug.
- Retrieve the filter from its location.
- Clean the filter device from contamination.
- It is advisable to clean the connecting pipes where rust and dirt can accumulate.
- After carrying out these operations, we assemble the node inreverse order.
If you cannot remove the filter, you can clean the drain system through the pump. To do this, lay the machine on its side and remove the pump. Next, disconnect the nozzles and clean.
Methods for cleaning the filter device
Before you clean the filter in the Indesit washing machine, you need to familiarize yourself with the recommended methods for doing this work.
There are two main methods:
- The mechanical method is to remove large particles with a fine brush (you can use a toothbrush). It will be more productive to remove dirt and rust under running water.
- The chemical method involves the use of citric acid to remove limescale and musty odor from the filter element. A better result can be obtained after soaking the part in the solution for several hours.
Also pay attention to cleaning the drain hole, where debris can also accumulate. For the convenience of detecting pollution, you can highlight with a flashlight.
Tips for proper use of the machine
In the operating instructions for the washing machine, manufacturers try to indicate the main points for cleaning the filters. Knowing these recommendations will save you from many troubles:
- Clean the filter at least once every three to four months.
- Try not to leave items that are damp in the drum for too long, as this can lead to mold and mildew growth.
- Use detergentproduct of good quality, without impurities.
- Be sure to disconnect the unit from the mains during cleaning.
- Avoid cleaning the filter with coarse lint.
Compliance with these simple preventive measures will extend the trouble-free operation of the washing machine. Any hostess who takes care of her assistant is able to perform filter cleaning operations without resorting to the help of specialists.
