Modern washing machines have made it possible to greatly facilitate the work of a person, while saving a lot of time. They are in complete control of the entire process. And after mechanical processing, the laundry can only be hung out to dry. However, such devices also brought additional problems. Therefore, it is very often possible to hear that modern housewives ask how to clean the washing machine from the smell. This issue will be discussed below.
Causes and their elimination
It should be noted right away that there is no single answer to how to clean the smell of a washing machine. This is due to the fact that the cause of this phenomenon can be a variety offactors. Therefore, before answering this question, it is necessary to study all the points in order to determine the optimal solution to eliminate such a defect.
Poor quality powder and rinse aid
Many craftsmen and even manufacturers of such devices, when answering the question of how to clean the smell of a washing machine, first of all recommend paying attention to the quality of the powder and rinse aid used. The fact is that some types of household chemicals are completely unsuitable for working with such equipment. Also, some manufacturers of such products frankly produce low-quality products. It not only gives an unpleasant smell, but can also harm the structure.
Problem Solving
Given this situation, the instruction on how to clean the washing machine from the smell of soda suggests the following sequence of actions:
- Replace household chemicals.
- Treat the drum and rubber band on the machine door with baking soda.
- Pour soda (50 g) and citric acid (20 g) into the powder container. After that, wash without laundry on the maximum heat setting.
- Use only high-quality powder and other household chemicals for the machine.
Scum
When using the device for a long time, scale forms on the heating element, which can become a source of many problems. Therefore, most of the instructions on how toto clean the washing machine from the smell of lemon acid, it is recommended to use drastic measures to make a kind of prevention. It is worth noting that such procedures should be performed once every six months or special additives should be used when washing, which prevent the appearance of scale and other contaminants.
Cleaning
First of all, it is recommended to clean the gum on the door with a solution of citric acid or vinegar. The fact is that it is under it that garbage very often accumulates, which, after exfoliating, gets into the drum, and from there onto the heating element itself. Some experts recommend using a special brush or gauze. Further, the masters, answering the question of how to clean the automatic washing machine from the smell of vinegar, advise pouring a little of this substance into the powder container and the drum itself. After that, washing is done on the mode with maximum water heating.
Incorrect operation
Some housewives very often collect dirty laundry directly in the machine. As a result, it not only begins to produce unpleasant odors, but also becomes moldy. This cannot be done, although very often this is not indicated in the operating instructions. Also, many people who ask a question about how to clean a washing machine from smell at home claim that after using the device they close the lid and do not ventilate the product. As a result, after opening it, they can observe the appearancethis effect.
Recommendations for elimination
First of all, you need to purchase a separate basket for storing dirty laundry. Keeping it in the washing machine is not only not recommended by the craftsmen, but is also unhygienic. Also, after washing, you do not need to close the door of the device. The fact is that the moisture that remains in the machine does not evaporate. This means that it becomes the cause of mold and even fungus. The door must be left open until the drum is dry. Many masters, talking about how to clean the washing machine from the smell inside the machine, first recommend finding the cause of such a defect and starting to operate it correctly. Only after that you can start this kind of prevention, because otherwise it will not give results.
Dirty filter
Almost all washing machines are equipped with a special device that protects the pump from small objects that accidentally find themselves in the drum. With prolonged use, a lot of debris accumulates in such a filter, which not only contributes to the appearance of odor, but can also cause malfunctions in the operation of the entire product. Also, some masters, explaining how to clean the smell inside the washing machine, recommend checking that the filter is installed at all. In some models, it simply does not exist. As a result, a huge amount ofdebris affecting product performance. At the same time, the smell will appear very often.
Cleaning the filter
First of all, you need to study the instruction manual for the device. You can find recommendations on how to access the filter and what type of this device is used in it. Next, this product is removed and mechanically cleaned using conventional detergents. In this case, it is recommended to pay special attention to the presence of small things in the seat that should be removed.
At the next stage, the instruction on how to clean the washing machine from smell and dirt advises to process the filter itself using citric acid or vinegar. If your model of the machine involves the use of a specific filter or it is completely out of order, then a replacement should be made. At the final stage, it is recommended to perform a full cleaning on the maximum temperature mode with the addition of citric acid.
Dirt under the rubber band
During long-term operation of the device, very often dirt collects under the rubber band, which serves as a seal when the door is closed. It is almost impossible to remove it with active detergents and even when idling in high temperature mode. It is this pollution that causes unpleasant odors. It is also worth noting that very often when washing some things accidentally fall under the elastic band andinvoluntarily get this dirt. She gets into the drum, spreading not only an unpleasant smell, but also dirtying it. Therefore, it is worth getting rid of this problem immediately, periodically making prevention.
Removal of pollution
It must be said right away that each individual model of such devices differs from each other in its design. Therefore, this technique is given only as an example. In this situation, an individual approach is needed, although the very principle of the work is the same:
- First choose a small piece of cloth or sponge. It must be sufficiently dense and rough to withstand certain loads and to have a mechanical effect on the surface itself.
- Use it to clean the back of the gum. To do this, it is best to use the finger on which it is wound. So you can feel all the contaminated areas yourself, which makes this job easier.
- To enhance the effect, you can use a special cleaner or soda.
It is best to perform this operation immediately after washing, while the rubber seal is wet.
Recommendations from experts
Some masters, talking about how to clean the washing machine from the smell of vinegar, also advise paying attention to the hose that goes from the device to the sewer system. Quite often it gets very clogged. As a result, an unpleasant odor comes from it. In this case, it is recommended to perform a complete replacement of this element. There are suchcases where the connection to the sewerage system goes in addition to the siphon. Then the smell appears directly from the pipe, since it is not prevented by the water seal inherent in this element. It is believed that such installation is a violation of the operating technique and it needs to be redone. Therefore, when purchasing a machine, you need to immediately buy a siphon in order to install it on a sink or bathroom to organize the correct drain.
Proper operation and timely care are a guarantee that you will not have a question about how to clean the washing machine from the smell of mold. The choice of the correct proportions of cleaning products is a very important point around which experts are constantly arguing. The fact is that some masters recommend reducing the number of active elements in order to reduce their impact on other nodes of the device. Others, on the contrary, recommend increasing their concentration to achieve maximum effect. However, there is the most optimal method, which involves filling the powder container with 100 g of citric acid or 100 ml of vinegar. The mass will be diluted with water, which will enter the system during cleaning.
Do not work with the device as long as it is connected to the mains. It is necessary to carefully study all the safety requirements that are attached to the product, observing them without fail. Also in such instructions very often there are recommendations for the production of self-cleaning, which are provided by the manufacturer for servicing a particular model. Sometimes you have to pay attentionon special household cleaners, which are also recommended by some washing machine manufacturers.
Conclusion
After reviewing the various techniques that explain how to clean the odor from the washing machine, we can conclude that they all boil down to three aspects. First of all, you need to properly operate the device and carry out periodic maintenance. It is also recommended to use high-quality household chemicals, special products for water softening and descaling. If an odor occurs, immediately clean with vinegar or citric acid. Following these rules, you can not only get rid of this defect, but also significantly increase the life of this household appliance.
