Absolutely all owners of washing machines are well aware that the filters of this type of equipment must be cleaned. But not everyone knows where the filters are. In addition, not everyone knows how to conduct cleansing activities.
The article will detail how to clean the filter in the washing machine.
How many filters are in the machine
Almost all modern models of washing machines have two filters installed:
- Jellied. It can be found only in new models of washing machines. Purifies the water that enters the washing machine. Protects the mechanism from various impurities. Looks like a grid with small holes.
- Drain. It is installed in all types of washing machines. It looks like a cork that twists into the washing machine itself. Purifies water that drains from appliances.
Drain filter
Clogs fairly quickly, especially if washed frequently in the machineshoes or very dirty clothes.
This type of filter is located at the bottom of the washing machine, most often on the right side. The compartment with the drain filter is protected by a special cover, which can be easily removed with a sharp thin object (for example, a knife). Removing the cover gives you access to the filter itself.
Removing the drain filter is simple, there is a small elevation on its cover, which you need to take and turn it counterclockwise. This manipulation must be performed until the drain filter is in your hand.
Inlet filter
The inlet filter clogs very quickly, so do not ignore cleaning it. You can find it in front of the water supply valve, inside the pipe. Disconnect the water supply hose before removing it. Next, carefully remove the filter itself.
Let's take a closer look at how to clean the filter of the Indesit washing machine - let's take the technique of this brand as an example.
Cleaning the drain filter
Clean the filter in the following order:
- Unplug the appliance and turn off the water supply to the washing machine.
- Remove the decorative panel or cover as described above.
- Remove the plug from the drain hose (if present). Drain any remaining water from the hose. Put the plug back on.
- Unscrew the drain filter cap and remove the filter itself.
- Clean thoroughlyconstruction. Well remove all foreign objects from it. Wash the filter with hot water. If necessary, clean it with detergents.
- Shine a flashlight into the inside of the nozzle. This makes it possible to see other dirt that needs to be removed from the washing machine. Remove dirt carefully - do not allow damage to the walls of the nozzle.
- Replace the filter and plug from it. Screw carefully.
- Reinstall the decorative panel.
Cleaning the inlet filter
Cleaning this unit is a rather complicated process. The difficulty of this event is due to the inconvenient location of the filling filter.
The filter is cleaned in the following order:
- Unplug the washing machine.
- Turn off the water supply to the device. The overlap location is near the inlet hose.
- Lay a rag on the floor, this will protect the floor from water that will pour out of the hole.
- Unscrew the hose by turning the nut counterclockwise. There is also a small rubber pad, put it aside so you don't lose it.
- Remove the filter. It is inside a plastic container. You need to take out the cleaning device together with the container using pliers.
- No need to remove the filter mesh from the plastic cylinder - it cleans well in it.
- Place the filter under the tap. Clean the device with a sponge, toothbrush or cloth withvilli.
- Inspect the hose. A small mesh can be installed in it, which also needs to be removed and cleaned in a similar way.
- Install the filler filter and the plastic cylinder into the nozzle. The structure must be placed as far as it will go. Don't let it wobble or spin.
- Reinstall the water supply hose and nut. Don't forget the rubber gasket.
After you have installed all the elements, check the connections. To do this, supply water to the system. If you find a leak, then tighten the nut tighter. If this manipulation does not work, install a new rubber gasket.
Let's talk about the features of cleaning the filter washing machines Bosch, LG, Samsung and Ariston. This question interests many.
Cleaning the Bosch washing machine filters
To clean the filters of the Bosch machine, you need to remove the front wall of the washing machine. To do this, press the clamps, remove the screws and remove the snail. The filter is cleaned of all contaminants in the same way as described above. After cleaning, the device should be well unscrewed and twisted. Remember to check the tightness of the connections after installing all the parts.
Cleaning the filters of Ariston brand devices
Manufacturers of Ariston brand washing machines have placed a drain filter on the right side of the device. Take a screwdriver, insert it between the cover and the case, then carefully remove the panel. The plastic of the washing machine is quite thin and fragile, so it does nottry to remove the panel with your hands. The filter of the Ariston washing machine is cleaned according to the algorithm described above.
Features of cleaning the filters of LG brand washing machine
The equipment of this brand is known for its quality and excellent technical characteristics. But even high-quality devices need constant care, so it's worth cleaning your LG washing machine's filters regularly.
The drain filter in washing machines of this brand is very low and the filter is closed with a hatch. To remove the cleaning device, you need to press the tongue key, and then push the door forward. Before you will be a plug and a piece of hose. First of all, disconnect the hose, after draining the remaining water from it. Next, unscrew the plug and remove the mesh. Wash the filter as above.
Cleaning filters for Samsung devices
Devices of this brand are able to report themselves that the filters are dirty. Code 4E and 5E - this is a signal that it's time to start cleaning the filters of the Samsung washing machine. The drain filter is located at the bottom of the front panel.
In closing
Experts recommend cleaning your washing machine filters at least once every six months. If you often wash heavily soiled items, then cleaning the drain and inlet filters should be done every two months. The frequency of cleaning can also be related to the quality of the water that enters the washing machine. Hard and dirty waterthis is a reason to clean at least once every three months.
Don't ignore this process. By regularly removing dirt from the filters, you extend the life of many mechanisms of the device components. Knowing the general recommendations for cleaning filters, you can easily cope with this task.
