Sliding closet door systems and space division structures are an extremely popular solution to save space. The variety of such options today is simply amazing. Let's look at the main types of systems in this category, let's look at the installation features.
Design features
The sliding door system is offered to the consumer as a complete set and consists of the following elements:
- canvas;
- door frame;
- set of upper and lower guides;
- pens;
- fittings.
Aluminum sliding door system
Sliding door guiding structures made of aluminum profiles make it possible to install doors up to 5 m high. The presence of roller ball bearings ensures an extremely smooth, pliable and quiet door movement. All functional elements are hidden inside the ceilings, which has a positive effect on the overall appearanceinstalled design.
Along with aluminum rails, a sliding door system with glass leaf can be used. This option looks extremely attractive when decorating a high-tech interior.
Steel system for sliding doors
Steel systems are particularly robust and have a correspondingly long service life. Such kits are equipped with high-quality roller mechanisms that are protected from falling out of the guides.
Compared to expensive aluminum, the steel sliding door system exemplifies the best value for money. In this category, the widest variety of canvases made from a wide variety of materials is available. As a result, the user gets the opportunity to find exactly the solution that best fits into the interior of a particular room.
Installation Tips
How is the sliding door system installed? To perform the work, the following tools, components and materials will be required:
- set of fasteners (self-tapping screws, anchors, finishing nails);
- drill;
- screwdriver;
- hammer;
- screwdrivers;
- door kit (top and bottom rails, frames, door leaf, roller set, seal).
Before the system of sliding compartment doors is installed, it is necessary to dismantle the old structure. To do this, everything is removed, including the box. Byafter dismantling, the walls are leveled, cracks and cracks are carefully sealed.
The necessary measurements are being made. Width is measured at the top, bottom and middle. The height of the opening is determined in the same way.
First, the lower guide is mounted. One of its sides should go 5 cm beyond the line of the doorway. Next, the top guide is installed. The latter is attached to the beam and built into the opening. In conclusion, the upper guide is reinforced on both sides with stoppers, which will prevent arbitrary expansion of the wings.
After completing the above steps, you can proceed to the installation of the door leaf:
- plane winds up behind decorative panels;
- ends are docked with the upper roller mechanism;
- the canvas rests on the lower rollers.
After completion, a quality check of the work is mandatory. The sashes must be actively rolled in various directions. Such actions allow you to make sure that all mechanisms are functioning smoothly, to make sure that the doors will open and close smoothly during operation.
In the end
Sliding door systems break stereotypes. Most people find such solutions not very practical. However, the inconveniences that arise during operation due to the habit of standard designs disappear quite quickly. As a result, the user receives an extremely original, practical solution forseparation of interior space.
