Intercom is in almost every city house. This is a handy thing that also helps in terms of security. And everything would be fine, but you have to pay for the intercom. There is a category of people who delay such payments and, as a result, are left without an intercom, as it is turned off for debts. But these people do not despair and are simply wondering how to connect an intercom if they have been turned off for non-payment. Although this is not very correct. It would be better to do everything according to the law and pay the debts.
Reason for disconnection
The intercom is not always turned off for debts. Consider all possible reasons when a shutdown occurs. There are several main reasons:
- Statement of the owner on the voluntary removal of the intercom from service.
- Some malfunctions of the technical part of the equipment, as well as mechanical damagesignal line or just power outages.
- Well, actually, the situation when the intercom handset was turned off for non-payment. How to connect? We'll figure it out.
If the intercom does not work due to a malfunction, then you should not engage in self-repair. Specially trained people are required to do this in a day. If the breakdown is serious, then this period may be extended up to three days.
Repair of intercoms in this case should be carried out by a company that bills you for the use of intercom services. In case of malfunctions, you should contact this organization, this can help to significantly reduce the time for repairing the intercom. As a rule, in your large and crowded entrance, everyone will rely on a neighbor. And in the end, no one will notify the company servicing the intercom about a breakdown. This rule has already been proven by millions of apartment buildings. Do not test this rule for yourself, show your active citizenship and defend your rights.
How to connect an intercom if it was turned off for non-payment?
When your intercom was turned off for debts, then this is clearly not happening from your apartment. This means that the cable is suitable for your apartment. If you decide to do everything yourself and connect the disconnected intercom yourself, then you should know all the features and subtleties of setting the parameters, as well as connecting your intercom handset to the common house line. Perhaps the easiest and fastest way to deal with everything in this case is to act strictly according to our instructions.
If disconnected for non-payment: instructions
The control system for the entire intercom is usually installed on the very first floor of your entrance. To get to the setup system, you will need a key that will give you access to the shield in your entryway. In addition, you need a screwdriver to open the case of the intercom device.
Next, you can move on to resolving the issue of how to connect the intercom, if disconnected for non-payment. But the thing is that in the device of each company this problem can be solved in different ways. It is for this reason that we will consider the issue using the example of intercoms from well-known manufacturers.
Vizit intercoms
So, the shield has already been opened, as well as the hull, now the most difficult part begins. All screws are unscrewed from the cover of your Vizit device on both sides (right and left). On the internal board, you need to find the WORK / PRG jumper. Then the two elements should be closed in the WORK position.
After that, you need to enter the service mode, but entering this intercom mode is possible either using a secret code or using a master key. When you do not have a password and no key, you need to set the jumper from the WORK position (in which we installed it recently) to the PRG position, this will mean for the intercom that its programming has begun.
It is worth noting that the key marked "220 Volts" does not have to be turned off, but it is extremely important in this case to be careful not to get an electric shock. After that from the side of the streetyou can make the necessary settings.
How to connect a disabled intercom? To enable a call to the apartment, you need to go to the “Settings Service” mode. To do this, you need to dial the combination of numbers 999 on the intercom, after which two short clear beeps should sound. Then press the "1" key, another beep will be heard.
Do not rush to exit the service mode, press "8". After you hear a beep, enter your apartment number. After entering the apartment number, press "", another beep will sound. It is worth knowing that if your apartment number is three-digit, then "" does not need to be pressed. The final stage of work is a set of the "1" key and the "" key.
After such manipulations, the intercom in your apartment will work. The WORK/PRG jumper must be moved from the PRG position to the WORK position. Procedure completed. You can assemble the body and close the shield.
Now we have learned how to act if the intercom was turned off for non-payment, how to reconnect the handset in the apartment ourselves. Now let's consider the moment when the key fob is registered, let's do it using the example of another manufacturer.
Cyfral intercoms
How to connect an intercom if it was turned off for non-payment when Cyfral is installed in your entrance? To enter the intercom menu, press any number or call button. The key must be held until a beep sounds. Of course, the code is unknown to you, so you need to remove the back cover of the intercom. Before everything is reset, the power is turned off on this intercom. After that, in the top two holes you needbridge two contacts. Zeroing in progress.
After a new connection, you will enter the submenu. After that, press two keys at the same time - "1" and "C". At this point, the system will completely reset to factory default settings with the default passcode. After that, you can screw the panel cover back into place.
To now enter the submenu, one by one dial the combination "1234". Then by pressing the number "5" you can change the code and register the key. After the characters appear on the screen, enter "000" and attach the key. You will hear a characteristic signal, this will mean that the system parameters have been saved. After changing the code, you need to exit, this is done by pressing the "C" key.
Eltis intercoms
Now about Eltis. How can I connect the intercom here, restore the disconnected handset in the apartment? Everything is done in the same way as in the case of the Cyfral intercom. Follow the necessary procedures and your intercom will start working again as before.
There are other companies that produce intercoms, but we have considered the most massive ones. Let's not focus on manufacturers who occupy a very small segment of the sales market for these devices in our country.
Reviews
Not only you are wondering what to do if the intercom is turned off, how to connect it yourself. This is a popular issue. There are also reviews of people who have done similar manipulations before you.
As a rule, reviews say that if everything is done as we described above, thenyour problem regarding how to connect a disabled intercom is removed by itself. But this is if you are friends with electricity and everything connected with it.
If you are far from such topics, then it will be useful for you to know about such situations when an attempt to solve a problem regarding the fact that the intercom was turned off for non-payment, how to connect everything back yourself, turns into a failure of the entire intercom in the entrance. Feedback like this says your neighbors won't be happy with what you've done.
But if your knowledge in electrics tends to zero, then you need an electrician friend if your intercom was turned off for your debts. How to connect it yourself, if you do not understand the issue of electricians, it is better not to even delve into it, you will ruin everything. Ask your electrician friend to help you with this.
Some of your neighbors, judging by the reviews, in general, will not appreciate your actions if they see. For this reason, you need to work quickly and at a time when there is the least traffic of neighbors in your entrance.
Also, if you break the intercom during your manipulations and someone notices you doing this, then with a very high probability you will have to pay for the repair or replacement of the intercom. This is evidenced by the reviews of those who fell into a similar unpleasant situation. The amounts are very, very tangible. So think again if it's worth the risk.
Tips
What do you recommend?
- If you know a lot about electrics, but just never solved problems with an intercom, thenyou can print the instructions on a piece of paper and take it with you, this will help you quickly and without errors connect an apartment to the intercom.
- Turning off the intercom, turning it on is quite simple, but you will need at least a minimum of tools (screwdrivers, wrenches, pliers, etc.).
- Unplug the intercom from the mains (work not under voltage), this will reduce the risk of electric shock to zero.
- According to the ads, you can find a person who, for a certain monetary fee, will do this procedure for you. Usually such people have extensive experience in such cases, they work quickly, accurately and with a guarantee for their services.
- Don't get into a situation where you have to do things like this.
Summing up
Intercom is a useful thing that makes the life of a city dweller easier and safer. But for everything in our time you have to pay. You also have to pay for the intercom. We would recommend that you pay the intercom service fee in a timely manner, so as not to engage in illegal independent connection later.
Of course, no one excludes situations when management companies and other organizations are engaged in real requisitions, which are covered by fees for using intercom services, but if such a situation occurs, then everything is decided in court. If the truth is on your side, then justice will prevail.
