No matter why you do not want to go to a car service to change the oil in your car's engine, you still have to change the oil after a certain period of time (mileage). Along with the oil filter. And this filter sometimes sticks so that, although it was wrapped by hand, it is not possible to unscrew it without special tools. In our article, we will offer four effective ways to unscrew the oil filter without a key or a special puller in an ordinary garage.
The vicissitudes of the process
The filter is screwed in and out very easily. With screwing everything is clear. We twist it all the way, then we tighten it, clasping it with both hands - and that's it. Often, by straining, the filter can also be torn off manually. But for those who are wondering how to unscrew the oil filter withoutkey, there were clearly problems with the unscrewing procedure. The main thing here is to tear it off the spot, that is, turn it once at least a couple of centimeters. And then things will go by themselves, he will get out by hand as easily as he screwed in.
First way - sandpaper
It's not uncommon for a piece to be slippery, or the location itself doesn't help to get a good grip on it. If the filter slips in your hands, medium-grit sanding can come to the rescue. The process is simple:
- Drain the used oil from the system by unscrewing the plug at the bottom of the car engine. Each one can have it in different places, but invariably on the bottom of the crankcase cover. After draining the used lubricant, only a couple of drops will flow out of the filter, so you can’t pollute the engine with all your desire.
- We crawl to the oil filter and grab it with our hand. Not in every model it will be possible to crawl to the filter with both hands, but if you succeeded, it is better, of course, to try to break the filter with both hands. If it doesn’t give in and slips, it’s bad. Keys, special pullers, for example, no. How to remove the oil filter without a key in this case?
- Wrap the filter with sandpaper. Its emery fractions will not allow sandpaper to slip through the filter. Grab the filter over the sandpaper and try again.
If it was possible to disrupt, we unscrew the filter completely, and the job is done. We screw in a new one, tighten the plug from the bottom, fill in new oil, and you're done. If manually tearing the part failed, read on.
The second and easiest way -sharp screwdriver
As we said, it's great to have a special puller on hand. But how to unscrew the oil filter without a special key? The best way out is to make your own device, that is, a kind of lever that will not slip and which you can easily grab onto. What needs to be done for this and what tools will be needed?
To do this, you will need a hammer and a strong screwdriver, in which the handle will not split from hitting it with a hammer. If you feel sorry for the screwdriver, you can use any metal pin, pointed at one end. And the meaning of the procedure is as follows.
The metal of the oil filter housing is thin, and it can be easily pierced through, thus making a kind of lever with which you can rip off the oil filter without straining at all. What we do:
- Install the pointed end of the pin (screwdriver) in the middle of the side of the filter.
- We hit the pin (screwdriver) with a hammer, making a hole in the filter casing and driving it into the inside of the part. Next, we break through the opposite wall.
- The lever is ready. How to unscrew the oil filter without a key using this lever? There is nothing easier. We take the edges of the pin (screwdriver) and turn. The filter breaks.
- We take out the screwdriver from the filter and then unscrew the part by hand. She will go like clockwork.
Don't be afraid of such a cruel procedure. A filter that has exhausted its resource is no longer useful to you anyway. For furtherit is unsuitable for operation, and in what form you will dispose of it, with holes or without holes, it doesn’t matter to you. Throw it in the landfill anyway.
The third way is gentle, using an old belt
This method of how to unscrew the oil filter without a key is only suitable if there is enough space around the oil filter itself so that we can crawl with a lever with which we will tighten the belt thrown over the filter glass. What will be needed in this case and how will we do it?
For the procedure, we need an old belt that goes, for example, to a generator, and what we will use instead of a lever to tighten it. For this, a massive wide screwdriver is suitable. What we do:
- Fold the belt in half (or more, depending on its length).
- Place it on the filter glass.
- We thread a screwdriver into it from one side and start turning it, tightening the belt around the filter.
- When the belt is tightened to the stop, we try to turn it with the help of the same screwdriver together with the filter clamped in it.
- After the filter turns for the first time, remove the belt with a screwdriver from it and then unscrew it manually.
Fourth way - hammer and chisel
Another fairly simple way to unscrew the oil filter without a key. For this, apart from the chisel itself with a sharply sharpened tip and a hammer, we have nothing more to do.will be needed. How we act:
- We set the sharp end of the chisel on the rim of the filter cup from the side adjacent to the engine.
- We place it at such an angle that at the moment of impact it could rip off the oil filter, that is, counterclockwise.
- Strike the chisel with a hammer. Didn't break? Move the chisel a centimeter further, strike again.
In the end, the filter will rotate, and the part can be turned out by hand. If something remains unclear, watch the video.
Conclusion
We hope that our simple tips on how to unscrew the oil filter without a key and other special and abstruse accessories helped you. Well, if you don’t want to get dirty, you have a direct road to a car service. Only there the procedure for changing the oil and filter, in addition to the oil and filter itself, will cost you a pretty penny. And why overpay for something that you can do yourself and without any tricky devices?
