If you are thinking about whether heating a house with electricity is cheaper or not, then you should read the information below.
The need to find a profitable solution
Conversion of electrical energy into thermal energy is considered the most convenient method of heating a home. The only problem is that at the end of the month the owner of the apartment or house gets huge bills. But to draw premature conclusions, as well as to abandon the attractive technology of the aforementioned type, is not worth it. Cheap heating of the house with electricity is still possible.
Energy Sale
Please, there is not a single person who would not be tempted by seasonal sales. Shopping lovers are looking forward to such events with great impatience. Every homeowner shouldbe aware that energy companies are running similar promotions every night. That is why it is recommended to take advantage of this offer. This indicates that cheap heating of the house with electricity will become possible. For consumers of electricity, two so-called tariff plans can be distinguished, among them single-rate and multi-zone. According to the first, payment is made by the majority of citizens. For each kWh, you have to pay 4.18 rubles, in rural areas this figure is somewhat lower. This rate applies to any time of the day. As for the multi-zone tariff, the price per kWh is different during the day and at night. In the first case, the cost is 4.79 rubles, while in the second - 1.63 rubles.
Resolving the issue
Thus, it is at night that electricity is sold for next to nothing. In order to switch to the described more favorable tariff, you need to buy a billing programmable meter, and then apply to the company that acts as an electricity supplier.
Heat accumulator
Cheap home heating with electricity is possible with the help of a heat accumulator, which is economical. With it, you can heat a private house without using gas. Under the mentioned term, which sounds so solid, there is an ordinary container filled with water. This design needs to be completed.some technical innovations. In the manufacture of such a battery, there is a need to adhere to certain rules. The material that will form the basis of the tank should be stainless steel, but this approach is quite expensive. You can replace stainless steel with ordinary steel, and to prevent corrosion, a magnesium anode is installed inside, which is similar to that used in household boilers. As the anode wears out, it must be replaced. The volume of the heat accumulator will depend on the power of the heating elements, the installation of the latter is carried out inside the device. The optimal value is an indicator equal to 300 liters per 1 kW.
A cover is installed at the top of the tank, which is equipped with a rubber seal. Outside, the container must be protected with insulating material. It is preferable to use mineral wool for this, because the foam, in contact with a hot surface, releases dangerous volatile substances. When installing in a poorly heated room - this, for example, applies to a boiler room - the thickness of the insulation under the bottom and on the side surfaces should be 150 millimeters. As for the cover, it is also important to provide it with thermal insulation, the thickness of which is 200 millimeters. If the heat reserve tank is supposed to be installed in a heated room, then the thickness of the insulation can be reduced, this indicator should be selected empirically.
Features of manufacturing a heat accumulator
Cheap home heatingelectricity is possible with the help of a heat accumulator, in the lower part of which heating elements should be installed in the amount of one or more pieces. According to experience, for a well-insulated building with an area of \u200b\u200b150 square meters, a total power of 6 kW will be sufficient. A heat exchanger should be installed on top of the inner space of the tank. It is prepared from metal pipes, as an alternative solution, you can use a technology that involves installation using several sections of cast-iron radiators.
For a battery with a capacity of 2 cubic meters, a heat exchanger consisting of 8 such sections will suffice. The heat exchanger cuts into the heating system, and after installing the container in its place, it is necessary to bring a water pipe equipped with a tap to it. Using a pipe, the battery will be filled with coolant. A drain pipe should be welded to the bottom, which has a drain into the sewer. In order to minimize heat loss, a DIY battery should be in the shape of a cylinder or cube, while its height should be equivalent to the diameter of the base.
The principle of operation of a heat accumulator
Heating your home with electricity cheaply is quite possible. If you decide to use the above method for this, then before you start equipping your home with this device, you need to familiarize yourself with the principle of operation. At night, the coolant is heated fromoperation of the electric boiler, in parallel, the heating elements in the battery heat the water, accumulating energy. When the tariff turns from preferential to regular, the boiler is turned off, while the liquid in the system must be redirected through a heat exchanger mounted in a heated tank. If a sufficiently powerful electrical equipment such as a machine or a pump works during the day, then such a solution may not be profitable. In this case, you should pay attention to other heating options, which will be described below.
Electric boilers for home heating
It is quite possible to heat a house with electricity cheaply if you use electric boilers that are equipped with a heat exchanger. At the same time, it is possible to connect the system to the home heating circuit, underfloor heating, as well as paths and the pool heating system. The water heating network is no exception. The energy that will be released by the process unit will transfer energy to the working environment through the heat exchanger. The significant efficiency of such a system is explained by the circulation of the coolant, which is carried out forcibly. This is possible thanks to the operation of the pump, which is part of the heater.
Models of appliances for economical heating of the house with electricity
If you decide to equip your home heating with electricity cheaply, you can implement this idea with your own hands in the ways described above. However, if you are not confident in your own abilities as a home master, then you can use alternativesolutions. Among them, it is impossible not to single out the A1 model, which is also called the “Veterkom”. This device is a fan with a power of 0.45 kW. This equipment pumps warm air and is able to guarantee a comfortable temperature in a small room. For a day of operation of such a device, you will have to pay about 40 rubles. If the thermal power of the device described above is not enough, then a 1.85 kW unit can be preferred. With its help, it will be possible to heat even a room of an impressive area, and you will have to pay 200 rubles for a day of operation of such equipment. It is worth noting that today it is possible to heat a house with electricity cheaply, reviews will help you decide on the choice of system. When choosing fan heaters, you should take into account that they will work only for some time during the day, which is why the prices mentioned will be much lower.
Using a heat generator
Today it is quite possible to provide home heating with electricity, consumer reviews will allow you to eliminate errors. Consumers quite often choose heat generators. The C3SS5 model has a calorific power of 3 kW. However, the named value can vary from 2.5 to 4.2. This device is quite often used for underfloor heating systems in rooms for various purposes. If you decide to equip the house with electricity with your own hands (meaning a multi-storey building), then you can use several of the blocks described above, each of which is located on a separate floor. Daily payment for the operation of such a unitwill be 500 rubles. However, it is worth considering the moment that it will not work around the clock, and its power is impressive enough to heat a large area. Today you can equip your home with electricity cheaply, solar panels will help you with this. They are the most technologically advanced solution in this matter.
