Wooden partitions for space zoning are an inexpensive and unusual method to highlight a separate corner in a room or studio apartment. With their help, you can implement a lot of practical solutions and design ideas, isolate the bedroom from the workplace, the living room from the hallway, the dining room from the kitchen. Such designs are highly appreciated by nature lovers and aesthetes.
Advantages of wooden partitions
Wooden partitions for space zoning are lightweight, especially frame and modular systems. If the process of their installation is compared with other products, then it is simple and as easy as possible. Such walls effectively delimit the room without overloading it, and there is no need to install additional reinforcement.
Designers advise using wood partitions in modern lofts and studios. Such material fits perfectly into the decoration.rooms decorated in eco-style. The advantages of wooden structures include:
- no compounds hazardous to he alth;
- the ability to assemble modular and panel elements with different types of shapes;
- easy to replace or repair.
This material is easy to process, so it is always possible to make a unique carved partition. It can be covered with paint, varnished or stained, decorated with beautiful prints, as well as plastered and wallpapered.
Flaws
Wooden partitions for room zoning also have disadvantages. This material must be treated with special protective equipment from:
- fungus;
- mold;
- fire.
Wood is vulnerable to temperature changes and moisture. For such walls, additional sound insulation is required. If electrical wiring will be laid inside the frame, then reinforced insulation is necessary due to the fact that the material is fire hazardous.
Features of partitions
Pine, ash, maple and beech are often used to make wooden partitions for space zoning. Decorative additions are:
- mirrors;
- braid;
- veneer of diametrically opposite colors.
There are designs made using:
- laminate;
- decorative panels;
- parquet board;
- chipboard;
- lamellatimber;
- MDF.
Partitions differ according to the type of construction. They should all be:
- strong;
- hard;
- easy.
Such a wall should have satisfactory heat and sound insulation. It should not fall behind the open door or under the weight of the wall cabinet, and also push through the ceiling or floor. Wooden partitions for zoning the space in the room are made of high-quality, well-dried and treated wood with the necessary impregnations.
There are many ways to build this kind of barrier. One of the most used are frame, in which wood is used only as a frame. The rest of the space is filled with any other material. These include drywall constructions. They stand out for their lightness, they can be installed in any required place, which is very convenient for redevelopment and construction.
There are frameless partitions made of boards, which are installed using tongue and groove or a dense vertical canvas. They are attached to the strapping, fixed on the ceiling and floor. The upper harness is called a nozzle, the lower harness is called lying down.
Panelboard or plank partitions are made from solid boards stuffed. They will mimic an ordinary wall. The weight of such a design is significant.
In order to get a decorative dividing system, for example, you can fill wooden slats in the form of a lattice or take a bar that will beshelving-like design.
Fixed partitions
Partitions - screens are supports with material attached to them like a screen. Such structures are characterized by sufficient strength, resistance to moisture and a long service life. However, they are unable to completely isolate the light between rooms.
Today, interior partitions in an apartment in the form of shelving are popular. They are different:
- open;
- combined;
- from the floor or at some distance from it.
It depends on the location of the furniture at the installation site of the partition. There is a double-sided rack or deaf on one side. You can make solid wooden structures with your own hands from boards, the thickness of which is 40-50 mm. They are installed vertically, then sheathed with clapboard, plywood or drywall. Boards are attached directly to specially nailed guide bars or logs and beams. Such partitions are very durable and have good soundproofing qualities, however, their manufacture will require a large amount of material.
Mobile partitions
If you look at the photo of a wooden partition for space zoning in the form of a portable floor structure, then it is a separate system that is not attached to the floor, ceiling and walls. Basically, this design does not perform a dividing function, but a decorative one. Behind such partitions, for example, it is convenienthide the head of the bed. Screen benefits include:
- easy to carry;
- the ability to create a secret zone anywhere you want;
- no special installation;
- possibility of independent production of various models;
- when assembled, it takes up almost no space, can be stored in a pantry, closet.
This design can be built from auxiliary materials. This wooden partition for zoning a room has disadvantages. She divides the space exclusively visually. It has absolutely no heat and sound insulation properties. There is a single-screen, flexible and folding mobile screen. It can be decorated in any style, it can be hi-tech, classic or baroque.
Sliding partitions
One of the most convenient zoning structures is a sliding type, which is a canvas. For making can be used:
- plastic;
- wood chip materials;
- glass;
- plywood and more.
The canvases are equipped with a frame, but it may not be. Depending on the characteristics of the space and design features, they are semicircular or straight.
Fixed with fittings specially designed for this purpose, as well as guide rails, which consist of 1, 2 or 3 rails. Sliding mechanisms can move in one or two directions. For such systems, handles are attached,embedded or cut into the canvas itself.
Design features divide them into three main types:
- rail;
- accordions;
- non-threshold.
The most reliable, repeating the design of wardrobe doors are rail. They can be mounted immediately after the repair. Partitions in the form of an accordion look like a screen. When folded, they do not look quite usual, they can even move apart to the very walls. Their installation allows you to greatly save space. When constructing non-threshold systems, there are no rails on the floor. This is convenient if there are small children in the house.
Sliding partitions made of wood for zoning space due to the mass of advantages are very popular. They visually isolate all parts of the room that have different functions, make the room cozy and protected. Such structures can be removed without problems at any time, and then the space will become open. Strangers will not immediately realize that in front of them is not a real, but a decorative wall. Permits for the construction of such a partition are not needed. For its manufacture, you can choose any material, it depends on:
- financial opportunities;
- room style;
- owner's taste.
The biggest drawback is poor soundproofing. This is due to the minimum thickness, as well as the presence of gaps at the top and bottom, which are necessary for the blades to move freely.
Forliving room
Most often, owners zone this particular room. It is necessary to divide the space into 2 conditional zones: one for a place of rest or reception of guests, the second for arranging a bedroom or study. Here you can use several decorative partitions. Decorative partitions in the living room in the form of a rack can serve as a dividing wall. Books, flowers and all kinds of accessories are placed on them. This will make the room comfortable and cozy. Shelves with square cells look very modern. They let in daylight, so they won't disturb the light.
Bedroom
In small apartments there is an acute lack of space, it is impossible to fully relax and work, so it often becomes necessary to combine a bedroom with an office. With the help of a decorative partition, this task is completely solved. Privacy can be arranged by constructing a screen of various shapes.
Kitchen
Partitions made of wood for zoning this room delimit the place for cooking and eating. In the interior of the kitchen, such systems improve the practicality of the cooking area and ennoble the dining area. A wire screen built on a wooden frame is considered especially convenient. Kitchen accessories are placed on it, besides, it is very easy to care for it. Such a decorative wall can be of various configurations.
For children's room
Decorative partition for zoning a room made of wood divides the space into a zone for:
- study;
- rest;
- games.
After such zoning, the mess will remain in the place calculated for this. Most often, for the device of such decoration, a decorative box-shaped structure is used, which is filled with everything necessary.
Tree branches
Decorative wood partitions can be made with all sorts of vertical decorations, not just solid opaque half walls. Thin trunks and tree branches look great. This design fits perfectly into the eco-style. Artificial greenery acts as decorations.
Partition of wooden doors
An additional wall can be built from old wooden doors. Such a system will look peculiar. To give it the necessary style, minimal processing and painting is required. It is possible to build a movable screen from the doors, moving on wheels.
Bamboo
Bamboo also refers to wooden partitions. Bamboo is a material that is not afraid of fluctuations in humidity and temperature. Such dividing structures are made from bamboo boards and whole stems of a plant that is over 5 years old. These partitions are environmentally friendly and highly aesthetic. They come in a variety of colors and textures.
Wooden pallets
An easy and interesting option to solve the problem of space is to use ordinary wooden pallets. One has only to minimally process the material, apply colorful accents, for example, take unforgettable photos,posters, and the room is provided with a spectacular atmosphere.
Partitions made of wood and glass
As you can see in the photo, decorative partitions for zoning help professional interior designers to realize the most daring ideas and ideas. These walls allow you to create a special interior in:
- fashionable now houses "without walls";
- hi-tech studio apartment;
- luxury apartments;
- loft-style rooms.
Sometimes they replace part of a wall or its entirety, and also divide a spacious room into several functional zones. The advantages of these architectural structures are:
- high strength and reliability;
- chic appearance;
- stylish design;
- absolute environmental friendliness;
- durability;
- moisture resistance;
- wear resistance.
Partitions for zoning (wood-glass) are light. They visually increase the space of the room, become a decoration of the overall decoration. They are easy to care for, easy to repair, assemble and disassemble.
Wooden window frame
In order to create this kind of dividing structure, you will need several frames that will need to be connected to each other. The result is a stylish and unusual partition made of wood for zoning a room. In an empty space, instead of glass, you can hang lanterns, decorative elements.
Plywood
Plywood is the material from which you can cut any desired shape. Such a partition will not take up much space,because it will be thin. Its flat surface, if desired, is decorated to match the style of the room.
Clapboard
For the manufacture of a dividing structure from a lining, it is necessary to build a frame. Subsequently, it must be sheathed with this material. Such a wall looks very good in a wooden house, and will make an ordinary city apartment cozy. When using lining in the bathroom, it must be treated with a moisture-repellent agent.
Installation nuances
Before installation, you must carefully calculate the dimensions of the future wall, determine the type of material used, because its features must be taken into account in the process.
Although various woods can be used to make decorative partitions for zoning out of wood, it is still better to give preference to larch. She is different:
- strength;
- durability;
- delightful texture.
The assembly of interior wooden partitions is conditionally divided into several stages. First of all, prepare the floor surface. Preparation consists in leveling and cleaning from dust, dirt, and then marking is performed. After that, guides or vertical racks and a base are installed, it depends on the type of design. Next, the main material is attached, and soundproofing is laid in the interior. Finishing is the final step.
In general, installation of a partition made of wood for zoningspace is simple, so most owners do it on their own. Decorative barriers divide the space very effectively even in a small apartment. A well-distributed area will make the house more comfortable and help simplify living conditions.
