The sound that furniture makes when loaded can annoy and unnerve its owners. The problem that many face is when the sofa creaks. How to fix this and what to do in a similar situation? Both an old and a new product can make a creak. First you need to determine the reasons for the "musicality" of the subject, and then begin to combat this phenomenon.
Wooden sofa creaks: possible causes
What matters is what material the structure is made of. Suppose a wooden sofa creaks. The most likely causes are as follows.
- Cracking, drying out of certain parts.
- Deformation of the spring block. One of the springs may have broken.
Wood is a material that tends to lose elasticity over time. There are moisture-resistant species, for example, aspen. There are those who react negatively to wet processing. All wood can dry outparts or one panel. Direct sunlight also poses a threat.
Brand new sofa creaks? Too tight fittings can be the source of the problem. In the case of old furniture, they could loosen. Thinning of the batting padded for softness (or other cushioning material) cannot be ruled out.
Why do metal structures make a sound
If the furniture has a metal structure, then one of the connection sections may creak. There are many possible options - loose or rusted bolts, ordinary subsidence, breakage of the spring block or one of its link rings.
A folding sofa creaks? First of all, you need to check the level of lubrication. Furniture can produce an annoying sound when placed on an uneven surface. Also, the cause may be deformation of the supporting structure. The corners or sides of the product may have buckled under constant loads.
Required Materials
What materials may be required to repair sofas? Stock up on the following items:
- soft interlining;
- upholstery material;
- spring block to fit;
- plywood board;
- metal corners;
- staples;
- PVA glue;
- bolts and other types of suitable fasteners.
During repair work, it is allowed to use materials that are not listed. Each model needs an individual approach. It is possible that in order to eliminate the “musicality” of the item, the upholstery will have to be completely replaced. If you plan to replace the spring block, you must select it in advance in size.
Tools
What tools might be needed when repairing sofas? Be sure to have the following items on hand:
- construction stapler;
- screwdriver set;
- pliers.
Where to start
Where to start the repair work? First of all, the sofa must be disassembled. An examination of the interior condition of the furniture will help determine the location of the squeak.
You need to unscrew the fasteners, and then examine them. It is important to pay attention to whether they are well twisted and fitted, whether there are worn threads or rust. If integrity violations are found, it is necessary to replace the failed fasteners with new ones. Be sure to replace the block that has undergone corrosion. Rust has already made the metal brittle and broken its structure.
You can always limit yourself to replacing one or two failed springs. However, the failure of one is likely to lead to problems with the second. This is due to the fact that the springs have the same manufacturing method and service life. Complete replacement of the spring unit saves time in most cases.
The "musicality" of the sofa has not disappeared? This means that the reason lies in something else.
Common problems and how to deal with them
So, the man's sofa creaks. How to fix itif the problem is the deformation of the spring block? If it is not rusted or broken, then replacement is not required. Pliers are required to fix the problem. It is necessary to carefully squeeze the rings and tighten the fasteners on the side panels.
Sagging - the reason why the sofa creaks? How to fix it, get rid of the annoying sound? In this case, the furniture needs to be updated inside. If the gasket material (foam rubber, batting, and so on) has become thinner, it must be replaced. The lack of friction will cause the sound to stop playing under load.
You need to remember that the layer should be thick enough. This is required in order to completely eliminate the contact of iron parts. A plywood layer will allow to achieve greater stability. It must be placed under the spring block. First you need to create a top padding from batting or foam rubber. Then carefully stretch the upholstery material. It is stapled with a stapler.
Cracked or withered wood
What other options can you imagine? Cracked or cracked wood is another possible reason why a sofa creaks. What to do in this situation? A defective part needs to be replaced. It can be armrests, backrest, side board, panel.
Theoretically, the problem can be eliminated at a lower cost - with the help of a resistant adhesive. However, in this case there is no guarantee that the cracks will not propagate further. wooden productit is necessary to carefully examine for recesses, cracks formed as a result of drying. In particularly difficult cases, it is easier to buy a new product than to renew worn material.
Other options
Do not rule out other reasons why the sofa creaks. How to fix the problem when it comes to a folding design? To begin with, you should study the state of the transformation mechanism, which could fail. There are two ways to fix the problem - by completely replacing the elements or by fixing them.
Unevenly standing supports are another likely explanation for the "musicality" of the piece of furniture. To fix the problem, they need to be adjusted in height. To do this, you need to stock up on plastic corks or other fairly stable improvised material.
The friction of metal parts can also cause the sofa to creak. If we are talking about an iron structure, lubricating the elements will help correct the situation. To do this, use engine oil. It must be carefully dripped along the joints of the fasteners. It is important that the oil does not affect the upholstery of furniture, its wooden parts. It is necessary to start adding lubricant only after preliminary preparation. The surface should be thoroughly cleaned of grease stains, furniture.
Sofa repair is a task that everyone can handle. Do not rush to the store for new furniture if the old product makes an annoying sound.
