A personal plot will not have a neat appearance if bushes have grown in its garden and park area and the grass has formed a dense cover. This indicates the neglect of the site by the owner, who does nothing even to mow the lawns. But mowing the grass is the easiest task on the site, because various equipment has been created for this work.
Gasoline trimmer advantage
For example, a trimmer is a very convenient and productive, lightweight, reliable and practical device. It can be electric, having a small weight, or gasoline with high performance. Gasoline ones are more common, as they have a fuel tank and can work at a distance from electrical communications. Perhaps the only disadvantage of a gasoline trimmer is that, like any other technique, it periodically fails. But in this matter, it also has an advantage, since for people who understand a little about technology, it is possible to repair gasoline trimmers with their own hands.
Search for breakdowns
If the trimmer stops starting, then you should not immediately sound the alarm and contact the service center, as the cause of the inoperability can be easily eliminated. Any do-it-yourself repair of gasoline trimmers begins with checking for the presence of a spark, without which it is impossible to ignite the fuel in the combustion chamber. If there is no spark, then the problem is either in the spark plug or in the ignition itself. An exception is in cases where the candle is filled with fuel mixture when the fuel is overfilled above the prescribed level. In this case, you just need to wipe it dry and the cherished spark will appear.
The spark plug will also tell you if there is no fuel. If it is dry and light brown in color, in this case, repairing a gasoline trimmer with your own hands will consist in debugging fuel pumping or cleaning the carburetor. All these reasons are easily eliminated, the main thing is that the engine itself works properly. But if the cause of the inoperability is still hidden in the engine itself, then it is recommended to contact a service center because of the complexity of the repair. But for people who know how to hold wrenches and a screwdriver in their hands, nothing is impossible. In most cases, trimmer engine repairs are completed successfully.
Briefly about engine repair
Problems in the engine begin after a few years of proper operation from the wear of components or suddenly when the trimmer is used improperly. Sorry about misusethey regret when they repair gasoline trimmers with their own hands after an engine breakdown. And this happens in cases where the dosage of oil in the fuel is not observed or the device works to a terrible overheating. Overheating may cause crankshaft jamming, destruction of piston rings, or complete burnout of the piston. In order to perform a piston revision, it is enough to remove the cylinder head, from under which the piston will appear, clearly reflecting the state of its working surface. The rings themselves do not peep out of the cylinder, so it does not matter whether to change the rings or the piston, in both cases you will have to remove the cylinder. When repairing gasoline trimmers with your own hands, it is worth remembering the fragility of piston rings, which can easily break in the absence of experience. The piston itself is not too difficult to install on the crankshaft. The main thing when repairing an engine is to assemble everything in the same way as it was before disassembly, and then everything will work again.
